Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY/Serial driver updates and cleanups for
  6.9-rc1. Included in here are:

   - more tty cleanups from Jiri

   - loads of 8250 driver cleanups from Andy

   - max310x driver updates

   - samsung serial driver updates

   - uart_prepare_sysrq_char() updates for many drivers

   - platform driver remove callback void cleanups

   - stm32 driver updates

   - other small tty/serial driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  dt-bindings: serial: stm32: add power-domains property
  serial: 8250_dw: Replace ACPI device check by a quirk
  serial: Lock console when calling into driver before registration
  serial: 8250_uniphier: Switch to use uart_read_port_properties()
  serial: 8250_tegra: Switch to use uart_read_port_properties()
  serial: 8250_pxa: Switch to use uart_read_port_properties()
  serial: 8250_omap: Switch to use uart_read_port_properties()
  serial: 8250_of: Switch to use uart_read_port_properties()
  serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  serial: 8250_ingenic: Switch to use uart_read_port_properties()
  serial: 8250_dw: Switch to use uart_read_port_properties()
  serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  serial: port: Introduce a common helper to read properties
  serial: core: Add UPIO_UNKNOWN constant for unknown port type
  serial: core: Move struct uart_port::quirks closer to possible values
  serial: sh-sci: Call sci_serial_{in,out}() directly
  serial: core: only stop transmit when HW fifo is empty
  serial: pch: Use uart_prepare_sysrq_char().
  ...

This is the same issue that was fixed for the VGA text buffer in commit
39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the
buffer"). The cure is also the same i.e. replace memcpy() with memmove()
due to the overlaping buffers.

Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition")
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Corrected the doc of vc_sanitize_unicode() and vc_translate_unicode(),
tightly coupled functions which parse UTF-8 byte sequences.
1. Desc. of @rescan corresponded to the meaning of the return value -1.
   Corrected + added "Return:" section.
2. Replaced the ambiguous "character" with "code point" or "byte".

Signed-off-by: Roman Žilka <roman.zilka@gmail.com>
Link: https://lore.kernel.org/r/bee9faa8-0ea7-4411-bf77-3cb2e06385c7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

0x0d00ff81 and 0x0800f501 are bitmasks of ASCII characters. Spell them
explicitly using BIT() + ASCII constants. GENMASK() is used for the
9-bit range in CTRL_ACTION.

This also modifies the 'if' checking if the masks should be applied.
>From a "random" ' ' to the actual size of the bitmasks' type.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-23-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are still numbers used for ASCII characters in vt_console_print().
As we have an ASCII enum now, use the constant names from the enum
instead.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-22-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To be uniform in the 'c' handling, use switch-case (with ranges) even in
the ESgetpars case in do_con_trol().

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-21-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

To be uniform in the 'c' handling, use switch-case (with ranges) even in
the ESnonstd case in do_con_trol().

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-20-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The code to reset the vc parameter parsing is repeated on two locations.
Create a helper vc_reset_params() and use it on both of them.

And instead of a 'for' loop to clear the array of parameters, use
simpler memset().

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-19-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In do_con_trol()'s ESsquare case, there is already a switch (c). It is
preceded by an 'if (c == '[')'. Despite this 'if' handles a state
transition and not a modifier, move it as one of the switch cases. This
makes all the 'c' decision making more obvious there.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-18-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Given all the ANSI control states are sequential in the vc_ctl_state
enum, we can define first/last constants and use them in
ansi_control_string(). It makes the test simple and allows for removal
of the 'if' (which was unnecessary at all -- the 'return' should have
returned the 'if' content directly anyway).

And remove the useless comment -- it's clear from the function
prototype.

Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20240202065608.14019-17-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>