linux.git/drivers/tty/vt, branch v6.11-rc2

vt: keyboard: Use led_set_brightness() in LED trigger activate() callback

2024-06-04T12:00:53+00:00

A LED trigger's activate() callback gets called when the LED trigger
gets activated for a specific LED, so that the trigger code can ensure
the LED state matches the current state of the trigger condition.

led_trigger_event() is intended for trigger condition state changes and
iterates over _all_ LEDs which are controlled by this trigger changing
the brightness of each of them.

In the activate() case only the brightness of the LED which is being
activated needs to change and that LED is passed as an argument to
activate(), switch to led_set_brightness() to only change the brightness
of the LED being activated.

Signed-off-by: Hans de Goede 
Reviewed-by: Jiri Slaby 
Link: https://lore.kernel.org/r/20240511152030.4848-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-05-22T18:53:02+00:00

Pull tty / serial updates from Greg KH:
 "Here is the big set of tty/serial driver changes for 6.10-rc1.
  Included in here are:

   - Usual good set of api cleanups and evolution by Jiri Slaby to make
     the serial interfaces move out of the 1990's by using kfifos
     instead of hand-rolling their own logic.

   - 8250_exar driver updates

   - max3100 driver updates

   - sc16is7xx driver updates

   - exar driver updates

   - sh-sci driver updates

   - tty ldisc api addition to help refuse bindings

   - other smaller serial driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (113 commits)
  serial: Clear UPF_DEAD before calling tty_port_register_device_attr_serdev()
  serial: imx: Raise TX trigger level to 8
  serial: 8250_pnp: Simplify "line" related code
  serial: sh-sci: simplify locking when re-issuing RXDMA fails
  serial: sh-sci: let timeout timer only run when DMA is scheduled
  serial: sh-sci: describe locking requirements for invalidating RXDMA
  serial: sh-sci: protect invalidating RXDMA on shutdown
  tty: add the option to have a tty reject a new ldisc
  serial: core: Call device_set_awake_path() for console port
  dt-bindings: serial: brcm,bcm2835-aux-uart: convert to dtschema
  tty: serial: uartps: Add support for uartps controller reset
  arm64: zynqmp: Add resets property for UART nodes
  dt-bindings: serial: cdns,uart: Add optional reset property
  serial: 8250_pnp: Switch to DEFINE_SIMPLE_DEV_PM_OPS()
  serial: 8250_exar: Keep the includes sorted
  serial: 8250_exar: Make type of bit the same in exar_ee_*_bit()
  serial: 8250_exar: Use BIT() in exar_ee_read()
  serial: 8250_exar: Switch to use dev_err_probe()
  serial: 8250_exar: Return directly from switch-cases
  serial: 8250_exar: Decrease indentation level
  ...

Merge tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

2024-05-15T19:34:46+00:00

Pull printk updates from Petr Mladek:

 - Use no_printk() instead of "if (0) printk()" constructs to avoid
   generating printk index for messages disabled at compile time

 - Remove deprecated strncpy/strcpy from printk.c

 - Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL

* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: cleanup deprecated uses of strncpy/strcpy
  printk: Remove redundant CONFIG_BASE_FULL
  printk: Change type of CONFIG_BASE_SMALL to bool
  printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
  ceph: Use no_printk() helper
  dyndbg: Use *no_printk() helpers
  dev_printk: Add and use dev_no_printk()
  printk: Let no_printk() use _printk()

printk: Change type of CONFIG_BASE_SMALL to bool

2024-05-06T15:39:09+00:00

CONFIG_BASE_SMALL is currently a type int but is only used as a boolean.

So, change its type to bool and adapt all usages:
CONFIG_BASE_SMALL == 0 becomes !IS_ENABLED(CONFIG_BASE_SMALL) and
CONFIG_BASE_SMALL != 0 becomes  IS_ENABLED(CONFIG_BASE_SMALL).

Reviewed-by: Petr Mladek 
Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Masahiro Yamada 
Signed-off-by: Yoann Congal 
Link: https://lore.kernel.org/r/20240505080343.1471198-3-yoann.congal@smile.fr
Signed-off-by: Petr Mladek

tty: add the option to have a tty reject a new ldisc

2024-05-04T16:45:11+00:00

... and use it to limit the virtual terminals to just N_TTY.  They are
kind of special, and in particular, the "con_write()" routine violates
the "writes cannot sleep" rule that some ldiscs rely on.

This avoids the

   BUG: sleeping function called from invalid context at kernel/printk/printk.c:2659

when N_GSM has been attached to a virtual console, and gsmld_write()
calls con_write() while holding a spinlock, and con_write() then tries
to get the console lock.

Tested-by: Tetsuo Handa 
Cc: Jiri Slaby 
Cc: Andrew Morton 
Cc: Daniel Starke 
Reported-by: syzbot 
Closes: https://syzkaller.appspot.com/bug?extid=dbac96d8e73b61aa559c
Signed-off-by: Linus Torvalds 
Link: https://lore.kernel.org/r/20240423163339.59780-1-torvalds@linux-foundation.org
Signed-off-by: Greg Kroah-Hartman

tty: vt: conmakehash: Don't mention the full path of the input in output

2024-04-09T13:50:12+00:00

This change strips $abs_srctree of the input file containing the
character mapping table in the generated output. The motivation for this
change is Yocto emitting a build warning

        WARNING: linux-lxatac-6.7-r0 do_package_qa: QA Issue: File /usr/src/debug/linux-lxatac/6.7-r0/drivers/tty/vt/consolemap_deftbl.c in package linux-lxatac-src contains reference to TMPDIR

So this change brings us one step closer to make the build result
reproducible independent of the build path.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20240311113017.483101-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2024-03-21T19:44:10+00:00

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY/Serial driver updates and cleanups for
  6.9-rc1. Included in here are:

   - more tty cleanups from Jiri

   - loads of 8250 driver cleanups from Andy

   - max310x driver updates

   - samsung serial driver updates

   - uart_prepare_sysrq_char() updates for many drivers

   - platform driver remove callback void cleanups

   - stm32 driver updates

   - other small tty/serial driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  dt-bindings: serial: stm32: add power-domains property
  serial: 8250_dw: Replace ACPI device check by a quirk
  serial: Lock console when calling into driver before registration
  serial: 8250_uniphier: Switch to use uart_read_port_properties()
  serial: 8250_tegra: Switch to use uart_read_port_properties()
  serial: 8250_pxa: Switch to use uart_read_port_properties()
  serial: 8250_omap: Switch to use uart_read_port_properties()
  serial: 8250_of: Switch to use uart_read_port_properties()
  serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  serial: 8250_ingenic: Switch to use uart_read_port_properties()
  serial: 8250_dw: Switch to use uart_read_port_properties()
  serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  serial: port: Introduce a common helper to read properties
  serial: core: Add UPIO_UNKNOWN constant for unknown port type
  serial: core: Move struct uart_port::quirks closer to possible values
  serial: sh-sci: Call sci_serial_{in,out}() directly
  serial: core: only stop transmit when HW fifo is empty
  serial: pch: Use uart_prepare_sysrq_char().
  ...

vt: fix unicode buffer corruption when deleting characters

2024-03-02T22:09:04+00:00

This is the same issue that was fixed for the VGA text buffer in commit
39cdb68c64d8 ("vt: fix memory overlapping when deleting chars in the
buffer"). The cure is also the same i.e. replace memcpy() with memmove()
due to the overlaping buffers.

Signed-off-by: Nicolas Pitre 
Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition")
Cc: stable 
Link: https://lore.kernel.org/r/sn184on2-3p0q-0qrq-0218-895349s4753o@syhkavp.arg
Signed-off-by: Greg Kroah-Hartman

tty/vt: Corrected doc of vc_sanitize_unicode(), vc_translate_unicode()

2024-02-17T16:44:46+00:00

Corrected the doc of vc_sanitize_unicode() and vc_translate_unicode(),
tightly coupled functions which parse UTF-8 byte sequences.
1. Desc. of @rescan corresponded to the meaning of the return value -1.
   Corrected + added "Return:" section.
2. Replaced the ambiguous "character" with "code point" or "byte".

Signed-off-by: Roman Žilka 
Link: https://lore.kernel.org/r/bee9faa8-0ea7-4411-bf77-3cb2e06385c7@gmail.com
Signed-off-by: Greg Kroah-Hartman

tty: vt: decrypt magic constants in vc_is_control()

2024-02-06T14:37:39+00:00

0x0d00ff81 and 0x0800f501 are bitmasks of ASCII characters. Spell them
explicitly using BIT() + ASCII constants. GENMASK() is used for the
9-bit range in CTRL_ACTION.

This also modifies the 'if' checking if the masks should be applied.
>From a "random" ' ' to the actual size of the bitmasks' type.

Signed-off-by: "Jiri Slaby (SUSE)" 
Link: https://lore.kernel.org/r/20240202065608.14019-23-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman