linux.git/drivers/tty/vt, branch v4.16-rc2

vfs: do bulk POLL* -> EPOLL* replacement

2018-02-11T22:34:03+00:00

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro 
Signed-off-by: Linus Torvalds

Merge tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2018-02-01T17:46:00+00:00

Pull tty/staging driver updates from Greg KH:
 "Here is the big tty/serial driver update for 4.16-rc1.

  The usual number of various serial driver fixes and updates to try to
  get them to work with crazy hardware configurations (seriously, how
  many different ways are hardware engineers going to come up with to
  hook up a simple UART?)

  There is also some serdev bugfixes and updates, as well as a
  smattering of other small fixes in here.

  All have been in the linux-next tree for a while, with no reported
  issues"

* tag 'tty-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (65 commits)
  tty: serial: exar: Relocate sleep wake-up handling
  tty: fix data race between tty_init_dev and flush of buf
  serial: imx: fix endless loop during suspend
  serial: core: mark port as initialized after successful IRQ change
  serdev: only match serdev devices
  serdev: do not generate modaliases for controllers
  serial: mxs-auart: don't use GPIOF_* with gpiod_get_direction
  serial: 8250_dw: Revert "Improve clock rate setting"
  MAINTAINERS: Add myself as designated reviewer for 8250_dw
  gpio: serial: max310x: Support open-drain configuration for GPIOs
  serdev: Fix serdev_uevent failure on ACPI enumerated serdev-controllers
  serial: 8250_ingenic: Parse earlycon options
  serial: 8250_ingenic: Add support for the JZ4770 SoC
  serial: core: Make uart_parse_options take const char* argument
  serial: 8250_of: fix return code when probe function fails to get reset
  serial: imx: Only wakeup via RTSDEN bit if the system has RTS/CTS
  serial: 8250_uniphier: fix error return code in uniphier_uart_probe()
  tty: n_gsm: Allow ADM response in addition to UA for control dlci
  tty: omap-serial: Fix initial on-boot RTS GPIO level
  tty: serial: jsm: Add one check against NULL pointer dereference
  ...

the rest of drivers/*: annotate ->poll() instances

2017-11-28T16:06:58+00:00

Signed-off-by: Al Viro

tty: vt: replace _manual_ swap with swap macro in set_selection

2017-11-28T14:32:32+00:00

Make use of the swap macro instead of _manually_ swapping values
and remove unnecessary variable tmp.

This makes the code easier to read and maintain.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva 
Signed-off-by: Greg Kroah-Hartman

treewide: Switch DEFINE_TIMER callbacks to struct timer_list *

2017-11-21T23:57:05+00:00

This changes all DEFINE_TIMER() callbacks to use a struct timer_list
pointer instead of unsigned long. Since the data argument has already been
removed, none of these callbacks are using their argument currently, so
this renames the argument to "unused".

Done using the following semantic patch:

@match_define_timer@
declarer name DEFINE_TIMER;
identifier _timer, _callback;
@@

 DEFINE_TIMER(_timer, _callback);

@change_callback depends on match_define_timer@
identifier match_define_timer._callback;
type _origtype;
identifier _origarg;
@@

 void
-_callback(_origtype _origarg)
+_callback(struct timer_list *unused)
 { ... }

Signed-off-by: Kees Cook

Merge branch 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2017-11-17T19:54:55+00:00

Pull compat and uaccess updates from Al Viro:

 - {get,put}_compat_sigset() series

 - assorted compat ioctl stuff

 - more set_fs() elimination

 - a few more timespec64 conversions

 - several removals of pointless access_ok() in places where it was
   followed only by non-__ variants of primitives

* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
  coredump: call do_unlinkat directly instead of sys_unlink
  fs: expose do_unlinkat for built-in callers
  ext4: take handling of EXT4_IOC_GROUP_ADD into a helper, get rid of set_fs()
  ipmi: get rid of pointless access_ok()
  pi433: sanitize ioctl
  cxlflash: get rid of pointless access_ok()
  mtdchar: get rid of pointless access_ok()
  r128: switch compat ioctls to drm_ioctl_kernel()
  selection: get rid of field-by-field copyin
  VT_RESIZEX: get rid of field-by-field copyin
  i2c compat ioctls: move to ->compat_ioctl()
  sched_rr_get_interval(): move compat to native, get rid of set_fs()
  mips: switch to {get,put}_compat_sigset()
  sparc: switch to {get,put}_compat_sigset()
  s390: switch to {get,put}_compat_sigset()
  ppc: switch to {get,put}_compat_sigset()
  parisc: switch to {get,put}_compat_sigset()
  get_compat_sigset()
  get rid of {get,put}_compat_itimerspec()
  io_getevents: Use timespec64 to represent timeouts
  ...

Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2017-11-14T05:05:31+00:00

Pull tty/serial updates from Greg KH:
 "Here is the big tty/serial driver pull request for 4.15-rc1.

  Lots of serial driver updates in here, some small vt cleanups, and a
  raft of SPDX and license boilerplate cleanups, messing up the diffstat
  a bit.

  Nothing major, with no realy functional changes except better hardware
  support for some platforms.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
  tty: ehv_bytechan: fix spelling mistake
  tty: serial: meson: allow baud-rates lower than 9600
  serial: 8250_fintek: Fix crash with baud rate B0
  serial: 8250_fintek: Disable delays for ports != 0
  serial: 8250_fintek: Return -EINVAL on invalid configuration
  tty: Remove redundant license text
  tty: serdev: Remove redundant license text
  tty: hvc: Remove redundant license text
  tty: serial: Remove redundant license text
  tty: add SPDX identifiers to all remaining files in drivers/tty/
  tty: serial: jsm: remove redundant pointer ts
  tty: serial: jsm: add space before the open parenthesis '('
  tty: serial: jsm: fix coding style
  tty: serial: jsm: delete space between function name and '('
  tty: serial: jsm: add blank line after declarations
  tty: serial: jsm: change the type of local variable
  tty: serial: imx: remove dead code imx_dma_rxint
  tty: serial: imx: disable ageing timer interrupt if dma in use
  serial: 8250: fix potential deadlock in rs485-mode
  serial: m32r_sio: Drop redundant .data assignment
  ...

Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-11-14T01:56:58+00:00

Pull timer updates from Thomas Gleixner:
 "Yet another big pile of changes:

   - More year 2038 work from Arnd slowly reaching the point where we
     need to think about the syscalls themself.

   - A new timer function which allows to conditionally (re)arm a timer
     only when it's either not running or the new expiry time is sooner
     than the armed expiry time. This allows to use a single timer for
     multiple timeout requirements w/o caring about the first expiry
     time at the call site.

   - A new NMI safe accessor to clock real time for the printk timestamp
     work. Can be used by tracing, perf as well if required.

   - A large number of timer setup conversions from Kees which got
     collected here because either maintainers requested so or they
     simply got ignored. As Kees pointed out already there are a few
     trivial merge conflicts and some redundant commits which was
     unavoidable due to the size of this conversion effort.

   - Avoid a redundant iteration in the timer wheel softirq processing.

   - Provide a mechanism to treat RTC implementations depending on their
     hardware properties, i.e. don't inflict the write at the 0.5
     seconds boundary which originates from the PC CMOS RTC to all RTCs.
     No functional change as drivers need to be updated separately.

   - The usual small updates to core code clocksource drivers. Nothing
     really exciting"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
  timers: Add a function to start/reduce a timer
  pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
  timer: Prepare to change all DEFINE_TIMER() callbacks
  netfilter: ipvs: Convert timers to use timer_setup()
  scsi: qla2xxx: Convert timers to use timer_setup()
  block/aoe: discover_timer: Convert timers to use timer_setup()
  ide: Convert timers to use timer_setup()
  drbd: Convert timers to use timer_setup()
  mailbox: Convert timers to use timer_setup()
  crypto: Convert timers to use timer_setup()
  drivers/pcmcia: omap1: Fix error in automated timer conversion
  ARM: footbridge: Fix typo in timer conversion
  drivers/sgi-xp: Convert timers to use timer_setup()
  drivers/pcmcia: Convert timers to use timer_setup()
  drivers/memstick: Convert timers to use timer_setup()
  drivers/macintosh: Convert timers to use timer_setup()
  hwrng/xgene-rng: Convert timers to use timer_setup()
  auxdisplay: Convert timers to use timer_setup()
  sparc/led: Convert timers to use timer_setup()
  mips: ip22/32: Convert timers to use timer_setup()
  ...

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12+00:00

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/tty files files with the correct SPDX license
identifier based on the license text in the file itself.  The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Jiri Slaby 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Chris Metcalf 
Cc: Jiri Kosina 
Cc: David Sterba 
Cc: James Hogan 
Cc: Rob Herring 
Cc: Eric Anholt 
Cc: Stefan Wahren 
Cc: Florian Fainelli 
Cc: Ray Jui 
Cc: Scott Branden 
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Joachim Eastwood 
Cc: Matthias Brugger 
Cc: Masahiro Yamada 
Cc: Tobias Klauser 
Cc: Russell King 
Cc: Vineet Gupta 
Cc: Richard Genoud 
Cc: Alexander Shiyan 
Cc: Baruch Siach 
Cc: "Maciej W. Rozycki" 
Cc: "Uwe Kleine-König" 
Cc: Pat Gefre 
Cc: "Guilherme G. Piccoli" 
Cc: Jason Wessel 
Cc: Vladimir Zapolskiy 
Cc: Sylvain Lemieux 
Cc: Carlo Caione 
Cc: Kevin Hilman 
Cc: Liviu Dudau 
Cc: Sudeep Holla 
Cc: Lorenzo Pieralisi 
Cc: Andy Gross 
Cc: David Brown 
Cc: "Andreas Färber" 
Cc: Kevin Cernekee 
Cc: Laxman Dewangan 
Cc: Thierry Reding 
Cc: Jonathan Hunter 
Cc: Barry Song 
Cc: Patrice Chotard 
Cc: Maxime Coquelin 
Cc: Alexandre Torgue 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Timur Tabi 
Cc: Tony Prisk 
Cc: Michal Simek 
Cc: "Sören Brinkmann" 
Cc: Thomas Gleixner 
Cc: Kate Stewart 
Cc: Philippe Ombredanne 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman