When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called. Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com Cc: stable <stable@kernel.org> Tested-by: Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...
syzbot reports kernel infoleak at vcs_read() [1], for buffer can be read
immediately after resize operation. Initialize buffer using kzalloc().
----------
#include <fcntl.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <linux/fb.h>
int main(int argc, char *argv[])
{
struct fb_var_screeninfo var = { };
const int fb_fd = open("/dev/fb0", 3);
ioctl(fb_fd, FBIOGET_VSCREENINFO, &var);
var.yres = 0x21;
ioctl(fb_fd, FBIOPUT_VSCREENINFO, &var);
return read(open("/dev/vcsu", O_RDONLY), &var, sizeof(var)) == -1;
}
----------
Link: https://syzkaller.appspot.com/bug?extid=31a641689d43387f05d3 [1]
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot <syzbot+31a641689d43387f05d3@syzkaller.appspotmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/4ef053cf-e796-fb5e-58b7-3ae58242a4ad@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A memory overlapping copy occurs when deleting a long line. This memory
overlapping copy can cause data corruption when scr_memcpyw is optimized
to memcpy because memcpy does not ensure its behavior if the destination
buffer overlaps with the source buffer. The line buffer is not always
broken, because the memcpy utilizes the hardware acceleration, whose
result is not deterministic.
Fix this problem by using replacing the scr_memcpyw with scr_memmovew.
Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition")
Cc: stable <stable@kernel.org>
Signed-off-by: Yangxi Xiang <xyangxi5@gmail.com>
Link: https://lore.kernel.org/r/20220628093322.5688-1-xyangxi5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a follow-up to the commit 4173f018aae1 (tty/vt: consolemap: rename and document struct uni_pagedir), rename also the members of struct vc_data. I.e. pagedir -> pagedict. And while touching all the places, remove also the unnecessary vc_ prefix. Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220614090537.15557-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following coccicheck warnings: drivers/tty/vt/vt.c:3942:8-16: WARNING: use scnprintf or sprintf drivers/tty/vt/vt.c:3950:8-16: WARNING: use scnprintf or sprintf Signed-off-by: Xuezhi Zhang <zhangxuezhi1@coolpad.com> Link: https://lore.kernel.org/r/20220531072814.34999-1-zhangxuezhi1@coolpad.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- int use_unicode -> bool: it's used as bool at some places already, so make it explicit. - int glyph -> u16: every caller passes a u16 in. So make it explicit too. And remove a negative check from inverse_translate() as it never could be negative. Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220607104946.18710-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit a9c3f68f3cd8d (tty: Fix low_latency BUG) in 2014, tty_flip_buffer_push() is only a wrapper to tty_schedule_flip(). We are going to remove the latter (as it is used less), so call the former in drivers/tty/. Cc: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20211122111648.30379-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...
The Linux console's VT102 implementation already consumes OSC
("Operating System Command") sequences, probably because that's how
palette changes are transmitted.
In addition to OSC, there are three other major clases of ANSI control
strings: APC ("Application Program Command"), PM ("Privacy Message"),
and DCS ("Device Control String"). They are handled similarly to OSC in
terms of termination.
Source: vt100.net
Add three new enumerated states, one for each of these types. All three
are handled the same way right now--they simply consume input until
terminated. I hope to expand upon this firmament in the future. Add
new predicate ansi_control_string(), returning true for any of these
states. Replace explicit checks against ESosc with calls to this
function. Transition to these states appropriately from the escape
initiation (ESesc) state.
This was motivated by the following Notcurses bugs:
https://github.com/dankamongmen/notcurses/issues/2050
https://github.com/dankamongmen/notcurses/issues/1828
https://github.com/dankamongmen/notcurses/issues/2069
where standard VT sequences are not consumed by the Linux console. It's
not necessary that the Linux console *support* these sequences, but it
ought *consume* these well-specified classes of sequences.
Tested by sending a variety of escape sequences to the console, and
verifying that they still worked, or were now properly consumed.
Verified that the escapes were properly terminated at a generic level.
Verified that the Notcurses tools continued to show expected output on
the Linux console, except now without escape bleedthrough.
Link: https://lore.kernel.org/lkml/YSydL0q8iaUfkphg@schwarzgerat.orthanc/
Signed-off-by: nick black <dankamongmen@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>