linux.git/drivers/tty/sysrq.c, branch v6.16

treewide, timers: Rename from_timer() to timer_container_of()

2025-06-08T07:07:37+00:00

Move this API to the canonical timer_*() namespace.

[ tglx: Redone against pre rc1 ]

Signed-off-by: Ingo Molnar 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com

treewide: Switch/rename to timer_delete[_sync]()

2025-04-05T08:30:12+00:00

timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner 
Signed-off-by: Ingo Molnar

Merge tag 'printk-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

2024-11-20T17:21:11+00:00

Pull printk updates from Petr Mladek:

 - Print more precise information about the printk log buffer memory
   usage.

 - Make sure that the sysrq title is shown on the console even when
   deferred.

 - Do not enable earlycon by `console=` which is meant to disable the
   default console.

* tag 'printk-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: add dummy printk_force_console_enter/exit helpers
  tty: sysrq: Use printk_force_console context on __handle_sysrq
  printk: Introduce FORCE_CON flag
  printk: Improve memory usage logging during boot
  init: Don't proxy `console=` to earlycon

tty: sysrq: Use printk_force_console context on __handle_sysrq

2024-11-11T11:53:31+00:00

By using the printk_force_console the loglevel workaround can be removed.
The workaround existed to always send the sysrq header message to all
consoles not matter what was the current loglevel, but it won't work for
deferred messages, since the loglevel can be restore before the message
is printed, suppressing the message that wasn't supposed to be
suppressed by the workaround.

Signed-off-by: Marcos Paulo de Souza 
Reviewed-by: John Ogness 
Reviewed-by: Petr Mladek 
Acked-by: Greg Kroah-Hartman 
Link: https://lore.kernel.org/r/20241105-printk-loud-con-v2-2-bd3ecdf7b0e4@suse.com
Signed-off-by: Petr Mladek

Merge tag 'v6.11-rc1' into for-6.12

2024-07-30T19:30:11+00:00

Linux 6.11-rc1

Merge tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2024-07-27T19:46:16+00:00

Pull more devicetree updates from Rob Herring:
 "Most of this is a treewide change to of_property_for_each_u32() which
  was small enough to do in one go before rc1 and avoids the need to
  create of_property_for_each_u32_some_new_name().

   - Treewide conversion of of_property_for_each_u32() to drop internal
     arguments making struct property opaque

   - Add binding for Amlogic A4 SoC watchdog

   - Fix constraints for AD7192 'single-channel' property"

* tag 'devicetree-fixes-for-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: iio: adc: ad7192: Fix 'single-channel' constraints
  of: remove internal arguments from of_property_for_each_u32()
  dt-bindings: watchdog: add support for Amlogic A4 SoCs

of: remove internal arguments from of_property_for_each_u32()

2024-07-25T11:53:47+00:00

The of_property_for_each_u32() macro needs five parameters, two of which
are primarily meant as internal variables for the macro itself (in the
for() clause). Yet these two parameters are used by a few drivers, and this
can be considered misuse or at least bad practice.

Now that the kernel uses C11 to build, these two parameters can be avoided
by declaring them internally, thus changing this pattern:

  struct property *prop;
  const __be32 *p;
  u32 val;

  of_property_for_each_u32(np, "xyz", prop, p, val) { ... }

to this:

  u32 val;

  of_property_for_each_u32(np, "xyz", val) { ... }

However two variables cannot be declared in the for clause even with C11,
so declare one struct that contain the two variables we actually need. As
the variables inside this struct are not meant to be used by users of this
macro, give the struct instance the noticeable name "_it" so it is visible
during code reviews, helping to avoid new code to use it directly.

Most usages are trivially converted as they do not use those two
parameters, as expected. The non-trivial cases are:

 - drivers/clk/clk.c, of_clk_get_parent_name(): easily doable anyway
 - drivers/clk/clk-si5351.c, si5351_dt_parse(): this is more complex as the
   checks had to be replicated in a different way, making code more verbose
   and somewhat uglier, but I refrained from a full rework to keep as much
   of the original code untouched having no hardware to test my changes

All the changes have been build tested. The few for which I have the
hardware have been runtime-tested too.

Reviewed-by: Andre Przywara  # drivers/clk/sunxi/clk-simple-gates.c, drivers/clk/sunxi/clk-sun8i-bus-gates.c
Acked-by: Bartosz Golaszewski  # drivers/gpio/gpio-brcmstb.c
Acked-by: Nicolas Ferre  # drivers/irqchip/irq-atmel-aic-common.c
Acked-by: Jonathan Cameron  # drivers/iio/adc/ti_am335x_adc.c
Acked-by: Uwe Kleine-König  # drivers/pwm/pwm-samsung.c
Acked-by: Richard Leitner  # drivers/usb/misc/usb251xb.c
Acked-by: Mark Brown  # sound/soc/codecs/arizona.c
Reviewed-by: Richard Fitzgerald  # sound/soc/codecs/arizona.c
Acked-by: Michael Ellerman  # arch/powerpc/sysdev/xive/spapr.c
Acked-by: Stephen Boyd  # clk
Signed-off-by: Luca Ceresoli 
Acked-by: Lee Jones 
Link: https://lore.kernel.org/r/20240724-of_property_for_each_u32-v3-1-bea82ce429e2@bootlin.com
Signed-off-by: Rob Herring (Arm)

sched_ext: Add sysrq-S which disables the BPF scheduler

2024-06-18T20:09:18+00:00

This enables the admin to abort the BPF scheduler and revert to CFS anytime.

Signed-off-by: Tejun Heo 
Reviewed-by: David Vernet 
Acked-by: Josh Don 
Acked-by: Hao Luo 
Acked-by: Barret Rhoden

printk: Rename console_replay_all() and update context

2024-06-03T15:17:29+00:00

Rename console_replay_all() to console_try_replay_all() to make
clear that the implementation is best effort. Also, the function
should not be called in NMI context as it takes locks, so update
the comment in code.

Fixes: 693f75b91a91 ("printk: Add function to replay kernel log on consoles")
Fixes: 1b743485e27f ("tty/sysrq: Replay kernel log messages on consoles via sysrq")
Suggested-by: Petr Mladek 
Signed-off-by: Shimoyashiki Taichi 
Signed-off-by: Sreenath Vijayan 
Link: https://lore.kernel.org/r/Zlguq/wU21Z8MqI4@sreenath.vijayan@sony.com
Reviewed-by: Petr Mladek 
Signed-off-by: Petr Mladek

tty/sysrq: Replay kernel log messages on consoles via sysrq

2024-04-11T12:22:52+00:00

When terminal is unresponsive, one cannot use dmesg to view
the printk ring buffer messages. Also, syslog services may be
disabled, especially on embedded systems, to check the messages
after a reboot. In this scenario, replay the messages in printk
ring buffer on consoles via sysrq by pressing sysrq+R.

The console loglevel will determine which all kernel log messages
are displayed. The messages will be displayed only when
console_trylock() succeeds. Users could repeat the sysrq key when
it fails. If the owner of console subsystem lock is stuck,
repeating the key won't work.

Suggested-by: Petr Mladek 
Signed-off-by: Shimoyashiki Taichi 
Reviewed-by: John Ogness 
Signed-off-by: Sreenath Vijayan 
Link: https://lore.kernel.org/r/cc3b9b1aae60a236c6aed1dc7b0ffa2c7cd1f183.1710220326.git.sreenath.vijayan@sony.com
Signed-off-by: Greg Kroah-Hartman