Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and serial driver fixes for 6.5-rc4 for some
  reported problems. Included in here is:

   - TIOCSTI fix for braille readers

   - documentation fix for minor numbers

   - MAINTAINERS update for new serial files in -rc1

   - minor serial driver fixes for reported problems

  All of these have been in linux-next with no reported problems"

* tag 'tty-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_dw: Preserve original value of DLF register
  tty: serial: sh-sci: Fix sleeping in atomic context
  serial: sifive: Fix sifive_serial_console_setup() section
  Documentation: devices.txt: reconcile serial/ucc_uart minor numers
  MAINTAINERS: Update TTY layer for lists and recently added files
  tty: n_gsm: fix UAF in gsm_cleanup_mux
  TIOCSTI: always enable for CAP_SYS_ADMIN

Preserve the original value of the Divisor Latch Fraction (DLF) register.
When the DLF register is modified without preservation, it can disrupt
the baudrate settings established by firmware or bootloader, leading to
data corruption and the generation of unreadable or distorted characters.

Fixes: 701c5e73b296 ("serial: 8250_dw: add fractional divisor support")
Cc: stable <stable@kernel.org>
Signed-off-by: Ruihong Luo <colorsu1922@gmail.com>
Link: https://lore.kernel.org/stable/20230713004235.35904-1-colorsu1922%40gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230713004235.35904-1-colorsu1922@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sleeping in atomic context warning as reported by the Smatch static
checker tool by replacing disable_irq->disable_irq_nosync.

Reported by: Dan Carpenter <dan.carpenter@linaro.org>

Fixes: 8749061be196 ("tty: serial: sh-sci: Add RZ/G2L SCIFA DMA tx support")
Cc: stable@kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230704154818.406913-1-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is called indirectly from the platform driver probe
function. Even if the driver is built in, it may be probed after
free_initmem() due to deferral or unbinding/binding via sysfs.
Thus the function cannot be marked as __init.

Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART")
Cc: stable <stable@kernel.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20230624060159.3401369-1-samuel.holland@sifive.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reconcile devices.txt with serial/ucc_uart.c regarding device number
assignments. ucc_uart.c supports 4 ports and uses minor devnums
46-49, so update devices.txt with that info.
Then update ucc_uart.c's reference to the location of the devices.txt
list in the kernel source tree.

Fixes: d7584ed2b994 ("[POWERPC] qe-uart: add support for Freescale QUICCEngine UART")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Timur Tabi <timur@kernel.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-serial@vger.kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20230724063341.28198-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The runtime PM state should not be changed by drivers that do not
implement runtime PM even if it happens to work around a bug in PM core.

With the wake irq arming now fixed, drop the bogus runtime PM state
update which left the device in active state (and could potentially
prevent a parent device from suspending).

Fixes: f3974413cf02 ("tty: serial: qcom_geni_serial: Wakeup IRQ cleanup")
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty/serial driver updates for 6.5-rc1.

  Included in here are:

   - tty_audit code cleanups from Jiri

   - more 8250 cleanups from Ilpo

   - samsung_tty driver bugfixes

   - 8250 lock port updates

   - usual fsl_lpuart driver updates and fixes

   - other small serial driver fixes and updates, full details in the
     shortlog

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (58 commits)
  tty_audit: make data of tty_audit_log() const
  tty_audit: make tty pointers in exposed functions const
  tty_audit: make icanon a bool
  tty_audit: invert the condition in tty_audit_log()
  tty_audit: use kzalloc() in tty_audit_buf_alloc()
  tty_audit: use TASK_COMM_LEN for task comm
  Revert "8250: add support for ASIX devices with a FIFO bug"
  serial: atmel: don't enable IRQs prematurely
  tty: serial: Add Nuvoton ma35d1 serial driver support
  tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
  tty: serial: imx: fix rs485 rx after tx
  selftests: tty: add selftest for tty timestamp updates
  tty: tty_io: update timestamps on all device nodes
  tty: fix hang on tty device with no_room set
  serial: core: fix -EPROBE_DEFER handling in init
  serial: 8250_omap: Use force_suspend and resume for system suspend
  tty: serial: samsung_tty: Use abs() to simplify some code
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
  tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
  serial: 8250: Apply FSL workarounds also without SERIAL_8250_CONSOLE
  ...

Pull driver core updates from Greg KH:
 "Here are a small set of changes for 6.5-rc1 for some driver core
  changes. Included in here are:

   - device property cleanups to make it easier to write "agnostic"
     drivers when regards to the firmware layer underneath them (DT vs.
     ACPI)

   - debugfs documentation updates

   - devres additions

   - sysfs documentation and changes to handle empty directory creation
     logic better

   - tiny kernfs optimizations

   - other tiny changes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  sysfs: Skip empty folders creation
  sysfs: Improve readability by following the kernel coding style
  drivers: fwnode: fix fwnode_irq_get[_byname]()
  ata: ahci_platform: Make code agnostic to OF/ACPI
  device property: Implement device_is_compatible()
  ACPI: Move ACPI_DEVICE_CLASS() to mod_devicetable.h
  base/node: Use 'property' to identify an access parameter
  driver core: device.h: add some missing kerneldocs
  kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
  isa: Remove unnecessary checks
  MAINTAINERS: add entry for auxiliary bus
  debugfs: Correct the 'debugfs_create_str' docs
  serial: qcom_geni: Comment use of devm_krealloc rather than devm_krealloc_array
  iio: adc: Use devm_krealloc_array
  hwmon: pmbus: Use devm_krealloc_array

Pull arm documentation move from Jonathan Corbet:
 "Move the Arm architecture documentation under Documentation/arch/.

  This brings some order to the documentation directory, declutters the
  top-level directory, and makes the documentation organization more
  closely match that of the source"

* tag 'docs-arm-move' of git://git.lwn.net/linux:
  dt-bindings: Update Documentation/arm references
  docs: update some straggling Documentation/arm references
  crypto: update some Arm documentation references
  mips: update a reference to a moved Arm Document
  arm64: Update Documentation/arm references
  arm: update in-source documentation references
  arm: docs: Move Arm documentation to Documentation/arch/

This reverts commit eb26dfe8aa7eeb5a5aa0b7574550125f8aa4c3b3.

Commit eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO
bug") merged on Jul 13, 2012 adds a quirk for PCI_VENDOR_ID_ASIX
(0x9710). But that ID is the same as PCI_VENDOR_ID_NETMOS defined in
1f8b061050c7 ("[PATCH] Netmos parallel/serial/combo support") merged
on Mar 28, 2005. In pci_serial_quirks array, the NetMos entry always
takes precedence over the ASIX entry even since it was initially
merged, code in that commit is always unreachable.

In my tests, adding the FIFO workaround to pci_netmos_init() makes no
difference, and the vendor driver also does not have such workaround.
Given that the code was never used for over a decade, it's safe to
revert it.

Also, the real PCI_VENDOR_ID_ASIX should be 0x125b, which is used on
their newer AX99100 PCIe serial controllers released on 2016. The FIFO
workaround should not be intended for these newer controllers, and it
was never implemented in vendor driver.

Fixes: eb26dfe8aa7e ("8250: add support for ASIX devices with a FIFO bug")
Cc: stable <stable@kernel.org>
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230619155743.827859-1-jiaqing.zhao@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>