linux.git/drivers/tty/serial/sunsu.c, branch v3.11

serial: use platform_{get,set}_drvdata()

2013-06-03T17:21:33+00:00

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Also, unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.

Signed-off-by: Jingoo Han 
Signed-off-by: Greg Kroah-Hartman

serial: sunsu: add missing platform_driver_unregister() when module exit

2013-05-05T00:39:48+00:00

We have registered platform driver when module init, and
need unregister it when module exit.

Signed-off-by: Wei Yongjun 
Signed-off-by: David S. Miller

sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option

2013-03-01T21:31:36+00:00

If a machine has X (X < 4) sunsu ports and cmdline
option "console=ttySY" is passed, where X < Y <= 4,
than the following panic happens:

Unable to handle kernel NULL pointer dereference
TPC: 
RPC: 
I7: 
Call Trace:
 [0000000000453a38] register_console+0x378/0x3e0
 [0000000000576fa0] uart_add_one_port+0x2e0/0x340
 [000000000057af40] su_probe+0x160/0x2e0
 [00000000005b8a4c] platform_drv_probe+0xc/0x20
 [00000000005b6c2c] driver_probe_device+0x12c/0x220
 [00000000005b6da8] __driver_attach+0x88/0xa0
 [00000000005b4df4] bus_for_each_dev+0x54/0xa0
 [00000000005b5a54] bus_add_driver+0x154/0x260
 [00000000005b7190] driver_register+0x50/0x180
 [00000000006d250c] sunsu_init+0x18c/0x1e0
 [00000000006c2668] do_one_initcall+0xe8/0x160
 [00000000006c282c] kernel_init_freeable+0x12c/0x1e0
 [0000000000603764] kernel_init+0x4/0x100
 [0000000000405f64] ret_from_syscall+0x1c/0x2c
 [0000000000000000]           (null)

1)Fix the panic;
2)Increment registered port number every successful
probe.

Signed-off-by: Kirill Tkhai 
CC: David Miller 
Signed-off-by: David S. Miller

TTY: switch tty_flip_buffer_push

2013-01-16T06:30:15+00:00

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

Now, the one where most of tty_port_tty_get gets removed:
tty_flip_buffer_push.

IOW we also closed all the races in drivers not using tty_port_tty_get
at all yet.

Also we move tty_flip_buffer_push declaration from include/linux/tty.h
to include/linux/tty_flip.h to all others while we are changing it
anyway.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

TTY: switch tty_insert_flip_char

2013-01-16T06:21:36+00:00

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

tty_insert_flip_char is the next one to proceed. This one is used all
over the code, so the patch is huge.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

tty: remove use of __devexit

2012-11-21T23:27:46+00:00

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton 
Cc: Jiri Slaby 
Cc: Alan Cox 
Acked-by: Tobias Klauser 
Cc: Lucas Tavares 
Cc: Daniel Walker 
Cc: Bryan Huntsman 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Tony Prisk 
Acked-by: David Brown 
Signed-off-by: Greg Kroah-Hartman

tty: remove use of __devinit

2012-11-21T23:22:52+00:00

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: Jiri Slaby 
Cc: Alan Cox 
Cc: Lucas Tavares 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Tony Prisk 
Acked-by: Tobias Klauser 
Acked-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

tty: serial: remove use of __devexit_p

2012-11-21T23:19:52+00:00

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: Alan Cox 
Cc: Lucas Tavares 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Tony Prisk 
Acked-by: Tobias Klauser 
Acked-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

serial: diminish usage of struct serial_uart_config

2012-09-05T20:15:07+00:00

This structure might have made sense many years ago, but at this
point it is only used in one specific driver, and referenced in
stale comments elsewhere.  Rather than change the sunsu.c driver,
simply move the struct to be within the exclusive domain of that
driver, so it won't get inadvertently picked up and used by other
serial drivers going forward.  The comments referencing the now
driver specific struct are updated accordingly.

Note that 8250.c has a struct that is similar in usage, with the
name serial8250_config; but is 100% independent and untouched here.

Cc: "David S. Miller" 
Signed-off-by: Paul Gortmaker 
Acked-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

serial: sunsu.c - don't explicitly tie array size to dynamic entity

2012-09-05T20:15:07+00:00

The addition of 8250-like entities continues to grow, while this
driver has a snapshot of a select few common 8250 UARTs.  So it
has no need to grow with the new additions, since it calls out
its own (largely historic) static list which does not grow.

Cc: "David S. Miller" 
Signed-off-by: Paul Gortmaker 
Acked-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman