linux.git/drivers/tty/serial/serial_mctrl_gpio.c, branch v4.14 Linux kernel source tree serial: mctrl_gpio: enable API usage only for initialized mctrl_gpios struct 2016-06-25T21:30:42+00:00 Yegor Yefremov yegorslists@googlemail.com 2016-05-31T08:59:17+00:00 434be0ae7aa746f481c3a22139e472dbc3f4f817 This workaround is needed for the cases, where mctrl_gpio API is used before mctrl_gpio_init() was invoked. This happens in 8250 during console initialization, as the driver sets DTR signal. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This workaround is needed for the cases, where mctrl_gpio API is used
before mctrl_gpio_init() was invoked. This happens in 8250 during
console initialization, as the driver sets DTR signal.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mctrl_gpio: add modem control read routine 2016-06-25T21:30:42+00:00 Yegor Yefremov yegorslists@googlemail.com 2016-05-31T08:59:16+00:00 bf5cee681e57babde5358a71e59b75151eb02c1a mctrl_gpio_get_outputs() returns the state of following signals: RTS, DTR While defining the routine for reading outputs, fix the comment for mctrl_gpio_get() routine as it returns only the state of the input signals. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
mctrl_gpio_get_outputs() returns the state of following signals:

RTS, DTR

While defining the routine for reading outputs, fix the comment for
mctrl_gpio_get() routine as it returns only the state of the input
signals.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios 2016-05-01T20:22:54+00:00 Geert Uytterhoeven geert+renesas@glider.be 2016-04-29T11:40:26+00:00 b67fcbdc5618d9a3a2b7bb22f7299556852e851f The OUT1 and OUT2 pins present on some legacy UARTs are basically GPIOs. It doesn't make much sense to emulate GPIOs using other GPIOs, hence drop support for that. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
The OUT1 and OUT2 pins present on some legacy UARTs are basically GPIOs.
It doesn't make much sense to emulate GPIOs using other GPIOs, hence
drop support for that.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Richard Genoud <richard.genoud@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mctrl_gpio: add IRQ locking 2016-05-01T20:22:54+00:00 Yegor Yefremov yegorslists@googlemail.com 2016-04-29T08:45:07+00:00 d11df61853f1d45035b7f5a6702c9b48d5f09a49 uart_handle_cts_change should be called with port->lock held. And for this to be save you must also disable irqs. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
uart_handle_cts_change should be called with port->lock held. And for
this to be save you must also disable irqs.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mctrl_gpio: Add missing module license 2016-03-08T00:11:14+00:00 Romain Izard romain.izard.pro@gmail.com 2016-02-23T14:54:54+00:00 82a3f87f6e80e0bf7978152021eb8938976721cb As the mctrl_gpio driver can be built as a module, it needs to have its license specified with MODULE_LICENSE. Otherwise, it cannot access required symbols exported through EXPORT_SYMBOL_GPL. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
As the mctrl_gpio driver can be built as a module, it needs to have its
license specified with MODULE_LICENSE. Otherwise, it cannot access
required symbols exported through EXPORT_SYMBOL_GPL.

Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mctrl_gpio: export mctrl_gpio_disable_ms and mctrl_gpio_init 2015-12-14T04:01:47+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2015-12-13T10:30:02+00:00 4f71a2e0a282611e55bacb60b564eaef5d16c27b To be able to make use of the mctrl-gpio helper from a module these functions must be exported. This was forgotten in the commit introducing support interrupt handling for these functions (while it was done for mctrl_gpio_enable_ms, *sigh*). Fixes: ce59e48fdbad ("serial: mctrl_gpio: implement interrupt handling") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
To be able to make use of the mctrl-gpio helper from a module these
functions must be exported. This was forgotten in the commit introducing
support interrupt handling for these functions (while it was done for
mctrl_gpio_enable_ms, *sigh*).

Fixes: ce59e48fdbad ("serial: mctrl_gpio: implement interrupt handling")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mctrl_gpio: implement interrupt handling 2015-10-04T17:47:51+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2015-09-30T08:19:41+00:00 ce59e48fdbad2aa6609ceb87e1306ec69e577e05 This allows to reduce the per-driver boiler plate considerably. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This allows to reduce the per-driver boiler plate considerably.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
serial: mctrl-gpio: rename init function 2015-10-04T17:46:43+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2015-09-30T08:19:40+00:00 7d8c70d8048c7b4307dff95d9300d6b1ea7a3547 This is done before adding more functionality to the init function with the existing name. As this new functionality conflicts with stuff drivers are required to implement themselves up to I want to convert them one by one to make reviewing and reverting more easy in case I broke something. Once mctrl_gpio_init is there and all drivers are converted mctrl_gpio_init_noauto can be removed again. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This is done before adding more functionality to the init function with
the existing name. As this new functionality conflicts with stuff
drivers are required to implement themselves up to I want to convert
them one by one to make reviewing and reverting more easy in case I
broke something.

Once mctrl_gpio_init is there and all drivers are converted
mctrl_gpio_init_noauto can be removed again.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty 2015-06-26T22:53:22+00:00 Linus Torvalds torvalds@linux-foundation.org 2015-06-26T22:53:22+00:00 8c7febe83915332276cab49e89f6580bb963fb9a Pull tty/serial driver updates from Greg KH: "Here's the tty and serial driver patches for 4.2-rc1. A number of individual driver updates, some code cleanups, and other minor things, full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits) Doc: serial-rs485.txt: update RS485 driver interface Doc: tty.txt: remove mention of the BKL MAINTAINERS: tty: add serial docs directory serial: sprd: check for NULL after calling devm_clk_get serial: 8250_pci: Correct uartclk for xr17v35x expansion chips serial: 8250_pci: Add support for 12 port Exar boards serial: 8250_uniphier: add bindings document for UniPhier UART serial: core: cleanup in uart_get_baud_rate() serial: stm32-usart: Add STM32 USART Driver tty/serial: kill off set_irq_flags usage tty: move linux/gsmmux.h to uapi doc: dt: add documentation for nxp,lpc1850-uart serial: 8250: add LPC18xx/43xx UART driver serial: 8250_uniphier: add UniPhier serial driver serial: 8250_dw: support ACPI platforms with integrated DMA engine serial: of_serial: check the return value of clk_prepare_enable() serial: of_serial: use devm_clk_get() instead of clk_get() serial: earlycon: Add support for big-endian MMIO accesses serial: sirf: use hrtimer for data rx serial: sirf: correct the fifo empty_bit ... 
Pull tty/serial driver updates from Greg KH:
 "Here's the tty and serial driver patches for 4.2-rc1.

  A number of individual driver updates, some code cleanups, and other
  minor things, full details in the shortlog.

  All have been in linux-next for a while with no reported issues"

* tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits)
  Doc: serial-rs485.txt: update RS485 driver interface
  Doc: tty.txt: remove mention of the BKL
  MAINTAINERS: tty: add serial docs directory
  serial: sprd: check for NULL after calling devm_clk_get
  serial: 8250_pci: Correct uartclk for xr17v35x expansion chips
  serial: 8250_pci: Add support for 12 port Exar boards
  serial: 8250_uniphier: add bindings document for UniPhier UART
  serial: core: cleanup in uart_get_baud_rate()
  serial: stm32-usart: Add STM32 USART Driver
  tty/serial: kill off set_irq_flags usage
  tty: move linux/gsmmux.h to uapi
  doc: dt: add documentation for nxp,lpc1850-uart
  serial: 8250: add LPC18xx/43xx UART driver
  serial: 8250_uniphier: add UniPhier serial driver
  serial: 8250_dw: support ACPI platforms with integrated DMA engine
  serial: of_serial: check the return value of clk_prepare_enable()
  serial: of_serial: use devm_clk_get() instead of clk_get()
  serial: earlycon: Add support for big-endian MMIO accesses
  serial: sirf: use hrtimer for data rx
  serial: sirf: correct the fifo empty_bit
  ...
gpiolib: rename gpiod_set_array to gpiod_set_array_value 2015-06-01T13:10:09+00:00 Rojhalat Ibrahim imr@rtschenk.de 2015-05-13T09:04:56+00:00 3fff99bc4e926d9602a7d6e8c008a0175a099ce4 There have been concerns that the function names gpiod_set_array() and gpiod_get_array() might be confusing to users. One might expect gpiod_get_array() to return array values, while it is actually the array counterpart of gpiod_get(). To be consistent with the single descriptor API we could rename gpiod_set_array() to gpiod_set_array_value(). This makes some function names a bit lengthy: gpiod_set_raw_array_value_cansleep(). Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
There have been concerns that the function names gpiod_set_array() and
gpiod_get_array() might be confusing to users. One might expect
gpiod_get_array() to return array values, while it is actually the array
counterpart of gpiod_get(). To be consistent with the single descriptor API
we could rename gpiod_set_array() to gpiod_set_array_value(). This makes
some function names a bit lengthy: gpiod_set_raw_array_value_cansleep().

Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>