linux.git/drivers/tty/serial/pch_uart.c, branch v3.11

pch_uart: Add uart_clk selection for the MinnowBoard

2013-06-26T04:24:11+00:00

Use DMI_BOARD_NAME to determine if we are running on a MinnowBoard and
set the uart clock to 50MHz if so. This removes the need to pass the
user_uartclk to the kernel at boot time.

Signed-off-by: Darren Hart 
Cc: Jiri Slaby 
Cc: "H. Peter Anvin" 
Cc: Peter Waskiewicz 
Cc: Andy Shevchenko 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: add console poll support

2013-03-15T20:55:23+00:00

Implement console poll for pch_uart, this could enable KGDBoC when
on pch-uart console.

Signed-off-by: Liang Li 
Acked-by: Jason Wessel 
Signed-off-by: Greg Kroah-Hartman

serial: pch_uart: fix sysrq handling for pch_uart

2013-01-25T16:52:23+00:00

When PCH_UART_CONSOLE and SERIAL_CORE_CONSOLE is not set neither, the
uart_port will have no 'sysrq' member hence their will need a '#ifdef'
in pch_uart.c to handle the case, otherwise we'll see compile error
like this:

  CC [M]  drivers/tty/serial/pch_uart.o
drivers/tty/serial/pch_uart.c: In function 'pch_uart_hal_read':
drivers/tty/serial/pch_uart.c:572:11: error: 'struct uart_port' has no member named 'sysrq'
make[4]: *** [drivers/tty/serial/pch_uart.o] Error 1

Reported-by: Randy Dunlap 
CC: Stephen Rothwell 
Signed-off-by: Liang Li 
Acked-by: Randy Dunlap 
Signed-off-by: Greg Kroah-Hartman

pch_uart: add sysrq support

2013-01-21T00:03:21+00:00

When send break to the uart port, we always get 'frame error', but we
can not just reset receive fifo in such case, otherwise the sysrq cmd
will not be received correctly.

When we handle sysrq output via pch_console_write, the priv lock has
already been taken so no need to take the lock in pch_console_write.

Signed-off-by: Liang Li 
Signed-off-by: Greg Kroah-Hartman

pch_uart: fix a deadlock when pch_uart as console

2013-01-21T00:03:20+00:00

When we use pch_uart as system console like 'console=ttyPCH0,115200',
then 'send break' to it. We'll encounter the deadlock on a cpu/core,
with interrupts disabled on the core. When we happen to have all irqs
affinity to cpu0 then the deadlock on cpu0 actually deadlock whole
system.

In pch_uart_interrupt, we have spin_lock_irqsave(&priv->lock, flags)
then call pch_uart_err_ir when break is received. Then the call to
dev_err would actually call to pch_console_write then we'll run into
another spin_lock(&priv->lock), with interrupts disabled.

So in the call sequence lead by pch_uart_interrupt, we should be
carefully to call functions that will 'print message to console' only
in case the uart port is not being used as serial console.

Signed-off-by: Liang Li 
Signed-off-by: Greg Kroah-Hartman

TTY: switch tty_flip_buffer_push

2013-01-16T06:30:15+00:00

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

Now, the one where most of tty_port_tty_get gets removed:
tty_flip_buffer_push.

IOW we also closed all the races in drivers not using tty_port_tty_get
at all yet.

Also we move tty_flip_buffer_push declaration from include/linux/tty.h
to include/linux/tty_flip.h to all others while we are changing it
anyway.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

TTY: switch tty_insert_flip_string

2013-01-16T06:22:35+00:00

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

tty_insert_flip_string this time.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

TTY: switch tty_buffer_request_room to tty_port

2013-01-16T06:17:28+00:00

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty pointer in
many call sites. Only tty_port will be needed and hence no more
tty_port_tty_get calls in those paths.

Here we start with tty_buffer_request_room.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

tty: remove use of __devinit

2012-11-21T23:22:52+00:00

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: Jiri Slaby 
Cc: Alan Cox 
Cc: Lucas Tavares 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Tony Prisk 
Acked-by: Tobias Klauser 
Acked-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman

tty: serial: remove use of __devexit_p

2012-11-21T23:19:52+00:00

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: Alan Cox 
Cc: Lucas Tavares 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Tony Prisk 
Acked-by: Tobias Klauser 
Acked-by: Nicolas Ferre 
Signed-off-by: Greg Kroah-Hartman