linux.git/drivers/tty/serial/cpm_uart, branch v4.19

serial: cpm_uart: return immediately from console poll

2018-09-18T13:22:15+00:00

kgdb expects poll function to return immediately and
returning NO_POLL_CHAR when no character is available.

Fixes: f5316b4aea024 ("kgdb,8250,pl011: Return immediately from console poll")
Cc: Jason Wessel 
Cc: 
Signed-off-by: Christophe Leroy 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2017-11-14T05:05:31+00:00

Pull tty/serial updates from Greg KH:
 "Here is the big tty/serial driver pull request for 4.15-rc1.

  Lots of serial driver updates in here, some small vt cleanups, and a
  raft of SPDX and license boilerplate cleanups, messing up the diffstat
  a bit.

  Nothing major, with no realy functional changes except better hardware
  support for some platforms.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
  tty: ehv_bytechan: fix spelling mistake
  tty: serial: meson: allow baud-rates lower than 9600
  serial: 8250_fintek: Fix crash with baud rate B0
  serial: 8250_fintek: Disable delays for ports != 0
  serial: 8250_fintek: Return -EINVAL on invalid configuration
  tty: Remove redundant license text
  tty: serdev: Remove redundant license text
  tty: hvc: Remove redundant license text
  tty: serial: Remove redundant license text
  tty: add SPDX identifiers to all remaining files in drivers/tty/
  tty: serial: jsm: remove redundant pointer ts
  tty: serial: jsm: add space before the open parenthesis '('
  tty: serial: jsm: fix coding style
  tty: serial: jsm: delete space between function name and '('
  tty: serial: jsm: add blank line after declarations
  tty: serial: jsm: change the type of local variable
  tty: serial: imx: remove dead code imx_dma_rxint
  tty: serial: imx: disable ageing timer interrupt if dma in use
  serial: 8250: fix potential deadlock in rs485-mode
  serial: m32r_sio: Drop redundant .data assignment
  ...

tty: serial: Remove redundant license text

2017-11-08T12:08:12+00:00

Now that the SPDX tag is in all tty files, that identifies the license
in a specific and legally-defined manner.  So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Jiri Slaby 
Cc: Eric Anholt 
Cc: Stefan Wahren 
Cc: Florian Fainelli 
Cc: Ray Jui 
Cc: Scott Branden 
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Joachim Eastwood 
Cc: Matthias Brugger 
Cc: Masahiro Yamada 
Cc: Tobias Klauser 
Cc: Russell King 
Cc: Vineet Gupta 
Cc: Richard Genoud 
Cc: Alexander Shiyan 
Cc: Baruch Siach 
Cc: Pat Gefre 
Cc: "Guilherme G. Piccoli" 
Cc: Jason Wessel 
Cc: Vladimir Zapolskiy 
Cc: Sylvain Lemieux 
Cc: Carlo Caione 
Cc: Kevin Hilman 
Cc: Liviu Dudau 
Cc: Sudeep Holla 
Cc: Lorenzo Pieralisi 
Cc: Andy Gross 
Cc: David Brown 
Cc: "Andreas Färber" 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Kevin Cernekee 
Cc: Laxman Dewangan 
Cc: Thierry Reding 
Cc: Jonathan Hunter 
Cc: Barry Song 
Cc: Patrice Chotard 
Cc: Maxime Coquelin 
Cc: Alexandre Torgue 
Cc: Chris Metcalf 
Cc: Peter Korsgaard 
Cc: Timur Tabi 
Cc: Tony Prisk 
Cc: Michal Simek 
Cc: "Sören Brinkmann" 
Signed-off-by: Greg Kroah-Hartman

tty: add SPDX identifiers to all remaining files in drivers/tty/

2017-11-08T12:08:12+00:00

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/tty files files with the correct SPDX license
identifier based on the license text in the file itself.  The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Jiri Slaby 
Cc: Benjamin Herrenschmidt 
Cc: Paul Mackerras 
Cc: Michael Ellerman 
Cc: Chris Metcalf 
Cc: Jiri Kosina 
Cc: David Sterba 
Cc: James Hogan 
Cc: Rob Herring 
Cc: Eric Anholt 
Cc: Stefan Wahren 
Cc: Florian Fainelli 
Cc: Ray Jui 
Cc: Scott Branden 
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: "James E.J. Bottomley" 
Cc: Helge Deller 
Cc: Joachim Eastwood 
Cc: Matthias Brugger 
Cc: Masahiro Yamada 
Cc: Tobias Klauser 
Cc: Russell King 
Cc: Vineet Gupta 
Cc: Richard Genoud 
Cc: Alexander Shiyan 
Cc: Baruch Siach 
Cc: "Maciej W. Rozycki" 
Cc: "Uwe Kleine-König" 
Cc: Pat Gefre 
Cc: "Guilherme G. Piccoli" 
Cc: Jason Wessel 
Cc: Vladimir Zapolskiy 
Cc: Sylvain Lemieux 
Cc: Carlo Caione 
Cc: Kevin Hilman 
Cc: Liviu Dudau 
Cc: Sudeep Holla 
Cc: Lorenzo Pieralisi 
Cc: Andy Gross 
Cc: David Brown 
Cc: "Andreas Färber" 
Cc: Kevin Cernekee 
Cc: Laxman Dewangan 
Cc: Thierry Reding 
Cc: Jonathan Hunter 
Cc: Barry Song 
Cc: Patrice Chotard 
Cc: Maxime Coquelin 
Cc: Alexandre Torgue 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Timur Tabi 
Cc: Tony Prisk 
Cc: Michal Simek 
Cc: "Sören Brinkmann" 
Cc: Thomas Gleixner 
Cc: Kate Stewart 
Cc: Philippe Ombredanne 
Cc: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart 
Reviewed-by: Philippe Ombredanne 
Reviewed-by: Thomas Gleixner 
Signed-off-by: Greg Kroah-Hartman

serial: cpm_uart: constify uart_ops structures

2017-08-28T18:51:21+00:00

These uart_ops structures are only stored in the ops field of a
uart_port structure and this fields is const, so the uart_ops
structures can also be const.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall 
Signed-off-by: Greg Kroah-Hartman

tty: serial: cpm_uart: make use of for_each_node_by_type()

2017-02-03T09:12:16+00:00

Instead of open-coding loop with of_find_node_by_type(), let's use canned
macro.

Signed-off-by: Dmitry Torokhov 
Signed-off-by: Greg Kroah-Hartman

tty: serial: cpm_uart: Fix module autoload for OF platform driver

2015-10-04T18:09:21+00:00

This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt 
Acked-by: Timur Tabi 
Signed-off-by: Greg Kroah-Hartman

tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1

2015-03-26T22:00:36+00:00

Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx
In addition, CONFIG_PPC_8xx also defines CONFIG_CPM1 as
communication co-processor

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

It looks like not many places still have that old CONFIG_8xx used,
so it is likely to be a good time to get rid of it completely ?

Signed-off-by: Christophe Leroy 
Signed-off-by: Greg Kroah-Hartman

tty: constify of_device_id array

2015-03-26T21:49:10+00:00

of_device_id is always used as const.
(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick 
Acked-by: Peter Korsgaard 
Acked-by: Timur Tabi 
Acked-by: Patrice Chotard 
Signed-off-by: Greg Kroah-Hartman