linux.git/drivers/tty/serial/arc_uart.c, branch v3.11

serial: arc_uart: Fix module alias

2013-07-26T23:34:00+00:00

Platform drivers use "platform:" prefix in module alias.
Also use DRIVER_NAME in MODULE_ALIAS to make module autoloading work.

Signed-off-by: Axel Lin 
Acked-by: Vineet Gupta 
Cc: stable 
Signed-off-by: Greg Kroah-Hartman

TTY: cleanup tty->hw_stopped uses

2013-03-18T23:24:30+00:00

tty->hw_stopped is set only by drivers to remember HW state. If it is
never set to 1 in a particular driver, there is no need to check it in
the driver at all. Remove such checks.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

serial/arc-uart: Miscll DT related updates (Grant's review comments)

2013-02-13T16:37:49+00:00

-replace "baud" with "current-speed"
-if uart alias doesn't exist in DT, don't abort, pick 0

Signed-off-by: Vineet Gupta 
Cc: Greg Kroah-Hartman 
Cc: Grant Likely 
Cc: Arnd Bergmann 
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Rob Herring 
Cc: Rob Landley 
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

serial/arc-uart: Fix section mistmatch

2013-01-18T01:20:09+00:00

Commit "serial/arc-uart: split probe from probe_earlyprintk" introduced
a build time warning:

"WARNING: vmlinux.o(.data+0x5baa0): Section mismatch in reference from
the variable early_arc_platform_driver to the function
.init.text:arc_serial_probe_earlyprintk()"

While at it - fixed another incorrectly placed initdata annotation.

Signed-off-by: Vineet Gupta 
Reported-by: kbuild test robot 
Cc: Greg Kroah-Hartman 
Cc: fengguang.wu@intel.com
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

TTY: switch tty_flip_buffer_push

2013-01-16T06:30:15+00:00

Now, we start converting tty buffer functions to actually use
tty_port. This will allow us to get rid of the need of tty in many
call sites. Only tty_port will needed and hence no more
tty_port_tty_get in those paths.

Now, the one where most of tty_port_tty_get gets removed:
tty_flip_buffer_push.

IOW we also closed all the races in drivers not using tty_port_tty_get
at all yet.

Also we move tty_flip_buffer_push declaration from include/linux/tty.h
to include/linux/tty_flip.h to all others while we are changing it
anyway.

Signed-off-by: Jiri Slaby 
Signed-off-by: Greg Kroah-Hartman

serial/arc-uart: switch to devicetree based probing

2013-01-16T06:16:05+00:00

* DT binding for arc-uart
* With alll the bits in place we can now use DT probing.

Note that there's a bit of kludge right now because earlyprintk portion
of driver can't use the DT infrastrcuture to get resoures/plat_data.
This requires some infrastructre changes to of_flat_ framework

Signed-off-by: Vineet Gupta 
Cc: Grant Likely 
Cc: Arnd Bergmann 
Cc: Alan Cox 
Cc: devicetree-discuss@lists.ozlabs.org
Cc: Rob Herring 
Cc: Rob Landley 
Acked-by: Arnd Bergmann 
Signed-off-by: Greg Kroah-Hartman

serial/arc-uart: platform_data order changed

2013-01-16T06:15:48+00:00

* is_emulated is now 1st element, rather than last
* also tucked all platform data refs together

Signed-off-by: Vineet Gupta 
Cc: Alan Cox 
Cc: Jiri Slaby 
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

serial/arc-uart: split probe from probe_earlyprintk

2013-01-16T06:15:17+00:00

This is in preparation for devicetree based probing, where earlyprintk
won't have access to DT serial aliases which the normal probe would
absolutely rely on.

Signed-off-by: Vineet Gupta 
Cc: Alan Cox 
Cc: Jiri Slaby 
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

serial/arc-uart: Don't index with -ve platform_device->id

2013-01-16T06:15:17+00:00

probe routine could index into port[] with -ve index. The check in
arc_uart_init_one() was too late.

This came to light when trying to port driver to CONFIG_OF, where
bydefault of-core code sets -ve platform dev id and in absence of
DT serial aliases, driver would use the -ve index.

Signed-off-by: Vineet Gupta 
Cc: Alan Cox 
Cc: Jiri Slaby 
Cc: linux-serial@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman

tty: remove use of __devexit

2012-11-21T23:27:46+00:00

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton 
Cc: Jiri Slaby 
Cc: Alan Cox 
Acked-by: Tobias Klauser 
Cc: Lucas Tavares 
Cc: Daniel Walker 
Cc: Bryan Huntsman 
Cc: "David S. Miller" 
Cc: Peter Korsgaard 
Cc: Tony Prisk 
Acked-by: David Brown 
Signed-off-by: Greg Kroah-Hartman