Pull OpenRISC updates from Stafford Horne:

 - New drivers and OpenRISC support for the LiteX platform

 - A bug fix to support userspace gdb debugging

 - Fixes one compile issue with blk-iocost

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: add local64.h to fix blk-iocost build
  openrisc: fix trap for debugger breakpoint signalling
  openrisc: add support for LiteX
  drivers/tty/serial: add LiteUART driver
  dt-bindings: serial: document LiteUART bindings
  drivers/soc/litex: add LiteX SoC Controller driver
  dt-bindings: soc: document LiteX SoC Controller bindings
  dt-bindings: vendor: add vendor prefix for LiteX

Enable serial driver to be built as a module.  To do so, init the
console support on driver/module load instead of using
console_initcall().

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201211005744.12855-1-khilman@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hardware supported by bcm63xx is also used by BCM4908 SoCs family that
is ARM64. In future more architectures may need it as well. There is
nothing arch specific breaking compilation so just stick to requiring
COMMON_CLK.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20201125090608.28442-1-zajec5@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This commit adds driver for the FPGA-based LiteUART serial controller
from LiteX SoC builder.

The current implementation supports LiteUART configured
for 32 bit data width and 8 bit CSR bus width.

It does not support IRQ.

Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>

We need the TTY/vt/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since 699cc4dfd140 (tty: serial: imx: add imx earlycon driver), the earlycon
part of imx serial is a separate driver and isn't necessarily enabled anymore
when the console is enabled. This causes users to loose the earlycon
functionality when upgrading their kenrel configuration via oldconfig.

Enable earlycon by default when IMX_SERIAL_CONSOLE is enabled.

Fixes: 699cc4dfd140 (tty: serial: imx: add imx earlycon driver)
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20201105204026.1818219-1-l.stach@pengutronix.de
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 625326ea9c84 ("MIPS: Remove PNX833x alias NXP_STB22x") removed
support for PNX833x, so it's time to remove serial driver, too.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lore.kernel.org/r/20201106130332.103476-1-tsbogend@alpha.franken.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...

aarch64-linux-gnu-ld: drivers/tty/serial/imx_earlycon.o: in function `imx_uart_console_early_write':
imx_earlycon.c:(.text+0x84): undefined reference to `uart_console_write'

The driver uses the uart_console_write(), but SERIAL_CORE_CONSOLE is not
selected, so uart_console_write is not defined, then we get the error.
Fix this by selecting SERIAL_CORE_CONSOLE.

Fixes: 699cc4dfd140 ("tty: serial: imx: add imx earlycon driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20200919063240.2754965-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Samsung S3C24xx and S3C64xx machine code cleanup for v5.10

Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos.  This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.

The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform.  The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory.  However this is step forward for multiplatform or at least
to keep this code still maintainable.

This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.

* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
  ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
  ARM: s3c: Cleanup from old plat-samsung include
  ARM: s3c: make headers local if possible
  ARM: s3c: move into a common directory
  ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
  cpufreq: s3c24xx: move low-level clk reg access into platform code
  cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
  ARM: s3c: remove cpufreq header dependencies
  cpufreq: s3c24xx: split out registers
  fbdev: s3c2410fb: remove mach header dependency
  ARM: s3c24xx: bast: avoid irq_desc array usage
  ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
  ARM: s3c24xx: include mach/irqs.h where needed
  ARM: s3c24xx: move s3cmci pinctrl handling into board files
  ARM: s3c24xx: move iis pinctrl config into boards
  ARM: s3c24xx: move spi fiq handler into platform
  ARM: s3c: adc: move header to linux/soc/samsung
  ARM: s3c24xx: move irqchip driver back into platform
  ARM: s3c24xx: move regs-spi.h into spi driver
  ARM: s3c64xx: remove mach/hardware.h
  ...

Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>