Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.8-rc1.
Included in here are the following:
- Thunderbolt subsystem and driver updates for USB 4 hardware and
issues reported by real devices
- xhci driver updates
- dwc3 driver updates
- uvc_video gadget driver updates
- typec driver updates
- gadget string functions cleaned up
- other small changes
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'usb-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
usb: typec: tipd: fix use of device-specific init function
usb: typec: tipd: Separate reset for TPS6598x
usb: mon: Fix atomicity violation in mon_bin_vma_fault
usb: gadget: uvc: Remove nested locking
usb: gadget: uvc: Fix use are free during STREAMOFF
usb: typec: class: fix typec_altmode_put_partner to put plugs
dt-bindings: usb: dwc3: Limit num-hc-interrupters definition
dt-bindings: usb: xhci: Add num-hc-interrupters definition
xhci: add support to allocate several interrupters
USB: core: Use device_driver directly in struct usb_driver and usb_device_driver
arm64: dts: mediatek: mt8195: Add 'rx-fifo-depth' for cherry
usb: xhci-mtk: fix a short packet issue of gen1 isoc-in transfer
dt-bindings: usb: mtk-xhci: add a property for Gen1 isoc-in transfer issue
arm64: dts: qcom: msm8996: Remove PNoC clock from MSS
arm64: dts: qcom: msm8996: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8998: Remove AGGRE2 clock from SLPI
arm64: dts: qcom: msm8939: Drop RPM bus clocks
arm64: dts: qcom: sdm630: Drop RPM bus clocks
arm64: dts: qcom: qcs404: Drop RPM bus clocks
arm64: dts: qcom: msm8996: Drop RPM bus clocks
...
Mika writes: thunderbolt: Changes for v6.8 merge window This includes following USB4/Thunderbolt changes for the v6.8 merge window: - Intel Lunar Lake support - PCIe tunneling improvements - DisplayPort tunneling improvements - Asymmetric switching improvements - Couple of minor fixes and cleanups. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Reduce retry timeout to speed up boot for some devices thunderbolt: Keep link as asymmetric if preferred by hardware thunderbolt: Add support for Intel Lunar Lake thunderbolt: Disable PCIe extended encapsulation upon teardown properly thunderbolt: Make PCIe tunnel setup and teardown follow CM guide thunderbolt: Improve logging when DisplayPort resource is added due to hotplug thunderbolt: Use tb_dp_read_cap() to read DP_COMMON_CAP as well thunderbolt: Disable CL states only when actually needed thunderbolt: Transition link to asymmetric only when both sides support it thunderbolt: Log XDomain link speed and width thunderbolt: Move width_name() helper to tb.h thunderbolt: Handle lane bonding of Gen 4 XDomain links properly thunderbolt: Unwind TMU configuration if tb_switch_set_tmu_mode_params() fails thunderbolt: Remove duplicated re-assignment of pointer 'out'
This is a followup to "thunderbolt: Workaround an IOMMU fault on certain systems with Intel Maple Ridge". It seems like the timeout can be reduced to 250ms. This reduces the overall delay caused by the retires to ~1s. This is about the time other things being initialized in parallel need anyway*, so like this the effective boot time is no longer compromised. *I only had a single device available for my measurements: A Clevo X170KM-G desktop replacement notebook. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In case of the link is brought up as asymmetric (due to hardware preference), we honor that and don't transition it to symmetric, unless a router with symmetric link got plugged below, in the topology (and a bandwidth allows transition to symmetric). Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Now that the driver core can properly handle constant struct bus_type, move the tb_bus_type variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Michael Jamet <michael.jamet@intel.com> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: <linux-usb@vger.kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/2023121904-utopia-broadcast-06d1@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel Lunar Lake has similar integrated Thunderbolt/USB4 controller as Intel Meteor Lake with some small differences in the host router (it has 3 DP IN adapters for instance). Add the Intel Lunar Lake PCI IDs to the driver list of supported devices. Tested-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In case of PCIe tunnel teardown (including if caused by router unplug), PCIe extended encapsulation bit should be cleared in downstream and upstream routers accordingly. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The USB4 Connection Manager guide suggests that the PCIe paths are enabled from the upstream adapter to the downstream adapter and vice versa on disable so make the driver follows this sequence. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
To allow us differentiate how DisplayPort resource is added to the DisplayPort resources list make the debug log to append "hotplug" when this was due to an actual hotplug. Signed-off-by: Gil Fine <gil.fine@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There is no point doing this separately as the register layout is the same. For this reason rename tb_dp_read_dprx() to tb_dp_wait_dprx() and call tb_dp_read_cap() instead. While there add debug log if the DPRX capability read times out. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>