ACPI 6.4 introduced a new _OSC capability used to negotiate whether the
OS is supposed to use Software (native) or Firmware based Connection
Manager. If the native support is granted then there are set of bits
that enable/disable different tunnel types that the Software Connection
Manager is allowed to tunnel.

This adds support for this new USB4 _OSC accordingly. When PCIe
tunneling is disabled then the driver switches security level to be
"nopcie" following the security level 5 used in Firmware based
Connection Manager.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com>

Mika writes:

thunderbolt: Changes for v5.11 merge window

This includes following Thunderbolt/USB4 changes for v5.11 merge window:

  * DMA traffic test driver

  * USB4 router NVM upgrade improvements

  * USB4 router operations proxy implementation available in the recent
    Intel Connection Manager firmwares

  * Support for Intel Maple Ridge discrete Thunderbolt 4 controller

  * A couple of cleanups and minor improvements.

* tag 'thunderbolt-for-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: (22 commits)
  thunderbolt: Add support for Intel Maple Ridge
  thunderbolt: Add USB4 router operation proxy for firmware connection manager
  thunderbolt: Move constants for USB4 router operations to tb_regs.h
  thunderbolt: Add connection manager specific hooks for USB4 router operations
  thunderbolt: Pass TX and RX data directly to usb4_switch_op()
  thunderbolt: Pass metadata directly to usb4_switch_op()
  thunderbolt: Perform USB4 router NVM upgrade in two phases
  thunderbolt: Return -ENOTCONN when ERR_CONN is received
  thunderbolt: Keep the parent runtime resumed for a while on device disconnect
  thunderbolt: Log adapter numbers in decimal in path activation/deactivation
  thunderbolt: Log which connection manager implementation is used
  thunderbolt: Move max_boot_acl field to correct place in struct icm
  MAINTAINERS: Add Isaac as maintainer of Thunderbolt DMA traffic test driver
  thunderbolt: Add DMA traffic test driver
  thunderbolt: Add support for end-to-end flow control
  thunderbolt: Make it possible to allocate one directional DMA tunnel
  thunderbolt: Create debugfs directory automatically for services
  thunderbolt: Add functions for enabling and disabling lane bonding on XDomain
  thunderbolt: Add link_speed and link_width to XDomain
  thunderbolt: Create XDomain devices for loops back to the host
  ...

We are going to use these in subsequent patch so make them available
outside of usb4.c.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Intel USB4 host routers that run the firmware based connection manager
(ICM) may implement a proxy for USB4 router operations. This is to avoid
the firmware to race with the OS driver, as both may need to run these
operations.

This adds two new connection manager specific callbacks which, if
provided, get called instead of the native USB4 router operation.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We are going to make usb4_switch_op() to match better the corresponding
firmware (ICM) USB4 router operation proxy interface, so that we can use
either based on the connection manager implementation.

For this reason rename usb4_switch_op() to __usb4_switch_op() that
provides the most complete interface. Then make usb4_switch_op() and
usb4_switch_op_data() call it with correct set of parameters and update
the callers accordingly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

We are going to make usb4_switch_op() to match better the corresponding
firmware (ICM) USB4 router operation proxy interface, so that we can use
either based on the connection manager implementation. For this reason
pass metadata directly to usb4_switch_op().

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

The currect code expects that the router returns back the status of the
NVM authentication immediately. When tested against a real USB4 device
what happens is that the router is reset and only after that the result
is updated in the ROUTER_CS_26 register status field. This also seems to
align better what the spec suggests.

For this reason do the same what we already do with the Thunderbolt 3
devices and perform the NVM upgrade in two phases. First start the
NVM_AUTH router operation and once the router is added back after the
reset read the status in ROUTER_CS_26 and expose it to the userspace
accordingly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Only USB4 lane 0 adapter has the USB4 port capability for wakes so only
program wakes on such adapters.

Fixes: b2911a593a70 ("thunderbolt: Enable wakes from system suspend")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

In order for the router and the whole domain to wake up from system
suspend states we need to enable wakes for the connected routers. For
device routers we enable wakes from PCIe and USB 3.x. This allows
devices such as keyboards connected to USB 3.x hub that is tunneled to
wake the system up as expected. For all routers we enabled wake on USB4
for each connected ports. This is used to propagate the wake from router
to another.

Do the same for legacy routers through link controller vendor specific
registers as documented in USB4 spec chapter 13.

While there correct kernel-doc of usb4_switch_set_sleep() -- it does not
enable wakes instead there is a separate function (usb4_switch_set_wake())
that does.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

When the port is connected to another host it should be marked as such
in the USB4 port capability. This information is used by the router
during sleep and wakeup.

Also do the same for legacy switches via link controller vendor specific
registers.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>