Pull thermal management updates from Zhang Rui:
 "There are not too many changes this time, except two new platform
  thermal drivers, ti-soc-thermal driver and x86_pkg_temp_thermal
  driver, and a couple of small fixes.

  Highlights:

   - move the ti-soc-thermal driver out of the staging tree to the
     thermal tree.

   - introduce the x86_pkg_temp_thermal driver.  This driver registers
     CPU digital temperature package level sensor as a thermal zone.

   - small fixes/cleanups including removing redundant use of
     platform_set_drvdata() and of_match_ptr for all platform thermal
     drivers"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (34 commits)
  thermal: cpu_cooling: fix stub function
  thermal: ti-soc-thermal: use standard GPIO DT bindings
  thermal: MAINTAINERS: Add git tree path for SoC specific updates
  thermal: fix x86_pkg_temp_thermal.c build and Kconfig
  Thermal: Documentation for x86 package temperature thermal driver
  Thermal: CPU Package temperature thermal
  thermal: consider emul_temperature while computing trend
  thermal: ti-soc-thermal: add DT example for DRA752 chip
  thermal: ti-soc-thermal: add dra752 chip to device table
  thermal: ti-soc-thermal: add thermal data for DRA752 chips
  thermal: ti-soc-thermal: remove usage of IS_ERR_OR_NULL
  thermal: ti-soc-thermal: freeze FSM while computing trend
  thermal: ti-soc-thermal: remove external heat while extrapolating hotspot
  thermal: ti-soc-thermal: update DT reference for OMAP5430
  x86, mcheck, therm_throt: Process package thresholds
  thermal: cpu_cooling: fix 'descend' check in get_property()
  Thermal: spear: Remove redundant use of of_match_ptr
  Thermal: kirkwood: Remove redundant use of of_match_ptr
  Thermal: dove: Remove redundant use of of_match_ptr
  Thermal: armada: Remove redundant use of of_match_ptr
  ...

This change updates the ti-soc-thermal driver to use
standard GPIO DT bindings to read the GPIO number associated
to thermal shutdown IRQ, in case the device features it.

Previously, the code was using a specific DT bindings.
As now OMAP supports the standard way to model GPIOs,
there is no point in having a ti specific binding.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree-discuss@lists.ozlabs.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>

EXYNOS4212 and EXYNOS4412 have the same thermal block, so there is no
reason to include support only for EXYNOS4412 in this driver.

Cc: linux-pm@vger.kernel.org
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

Fix build error in x86_pkg_temp_thermal.c.  It requires that
X86_MCE & X86_THERMAL_VECTOR be enabled, so depend on the latter symbol,
since it depends on X86_MCE (indirectly).

Also, X86_PKG_TEMP_THERMAL is already inside an "if THERMAL" block,
so remove that duplicated dependency.

ERROR: "platform_thermal_package_rate_control" [drivers/thermal/x86_pkg_temp_thermal.ko] undefined!
ERROR: "platform_thermal_package_notify" [drivers/thermal/x86_pkg_temp_thermal.ko] undefined!

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Conflicts:
	drivers/thermal/Kconfig
	drivers/thermal/Makefile

This driver register CPU digital temperature sensor as a thermal
zone at package level.
Each package will show up as one zone with at max two trip points.
These trip points can be both read and updated. Once a non zero
value is set in the trip point, if the package package temperature
goes above or below this setting, a thermal notification is
generated.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

In case emulated temperature is in use, using the trend
provided by driver layer can lead to bogus situation.
In this case, debugger user would set a temperature value,
but the trend would be from driver computation.

To avoid this situation, this patch changes the get_tz_trend()
to consider the emulated temperature whenever that is in use.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Add support to TI dra752 chips by adapting the driver
device table.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>