After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.

Convert all platform drivers below drivers/thermal to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.

On the way make a few whitespace changes to make indention consistent.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241019163412.304422-2-u.kleine-koenig@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Don't populate the read-only arrays on the stack at run time, instead
make them static const.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://lore.kernel.org/r/20241022184622.1296044-1-colin.i.king@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

On some pre-production hardware, the SoCs do not contain calibration
data for the thermal sensors. The downstream drivers provide default
values that sort of work, instead of having the thermal sensors not
work at all.

Port the default values to the upstream driver. These values are from
the ChromeOS kernels, which sadly do not cover the MT7988.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240620092306.2352606-1-wenst@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Fix thermal zone names for consistency with the other SoCs:
- GPU0 must be used as the first GPU item.
- SOCx deal with audio DSP, video, and infra subsystems.

The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.

The definitions can be safely modified here because they are used only
in the LVTS driver, which is modified accordingly, and have not yet
been included in a released kernel.

Fixes: 78c88534e5e1 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-2-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Fix a thermal zone name for consistency with the other SoCs:
MFG contains GPU, the latter is more specific and must be used here.

The naming must be fixed "atomically" so compilation does not break.
As a result, the change is made in the dt-bindings and in the LVTS
driver within a single commit, despite the checkpatch warning.

The definition can be safely modified here because it is used only
in the LVTS driver, which is modified accordingly, and has not yet
been included in a released kernel.

Fixes: a2ca202350f9 ("dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240603-mtk-thermal-mt818x-dtsi-v7-1-8c8e3c7a3643@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

This patch prevents from registering thermal entries and letting the
driver misbehave if efuse data is invalid. A device is not properly
calibrated if the golden temperature is zero.

Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240604-mtk-thermal-calib-check-v2-1-8f258254051d@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Filtered mode is not supported on mt8188 SoC and is the source of bad
results. Move to immediate mode which provides good temperatures.

Fixes: f4745f546e60 ("thermal/drivers/mediatek/lvts_thermal: Add MT8188 support")
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Link: https://lore.kernel.org/r/20240516-mtk-thermal-mt8188-mode-fix-v2-1-40a317442c62@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

In 'lvts_should_update_thresh()' and 'lvts_ctrl_start()' functions,
the parameter passed to 'lvts_for_each_valid_sensor()' macro is always
'lvts_ctrl->lvts_data->lvts_ctrl'. In other words, the array index 0
is systematically passed as 'struct lvts_ctrl_data' type item, even
when another item should be consumed instead.

Hence, the 'valid_sensor_mask' value which is selected can be wrong
because unrelated to the 'struct lvts_ctrl_data' type item that should
be used. Hence, some thermal zone can be registered for a sensor 'i'
that does not actually exist. Because of the invalid address used
as 'lvts_sensor[i].msr', this situation ends up with a crash in
'lvts_get_temp()' function, where this 'msr' pointer is passed to
'readl_poll_timeout()' function. The following message is output:
"Unable to handle kernel NULL pointer dereference at virtual
address <msr>", with <msr> = 0.

This patch fixes the issue.

Fixes: 11e6f4c31447 ("thermal/drivers/mediatek/lvts_thermal: Allow early empty sensor slots")
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240503-mtk-thermal-lvts-ctrl-idx-fix-v1-2-f605c50ca117@baylibre.com

In struct lvts_ctrl_data, num_lvts_sensor and cal_offset[] are not used.

Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240503-mtk-thermal-lvts-ctrl-idx-fix-v1-1-f605c50ca117@baylibre.com

Verify that lvts_data is not NULL before using it.

Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240502-mtk-thermal-lvts-data-v1-1-65f1b0bfad37@baylibre.com