linux.git/drivers/target, branch v4.0-rc6

target: do not reject FUA CDBs when write cache is enabled but emulate_write_cache is 0

2015-03-20T06:26:46+00:00

A check that rejects a CDB with FUA bit set if no write cache is
emulated was added by the following commit:

  fde9f50 target: Add sanity checks for DPO/FUA bit usage

The condition is as follows:

  if (!dev->dev_attrib.emulate_fua_write ||
      !dev->dev_attrib.emulate_write_cache)

However, this check is wrong if the backend device supports WCE but
"emulate_write_cache" is disabled.

This patch uses se_dev_check_wce() (previously named
spc_check_dev_wce) to invoke transport->get_write_cache() if the
device has a write cache or check the "emulate_write_cache" attribute
otherwise.

Reported-by: Christoph Hellwig 
Signed-off-by: Christophe Vu-Brugier 
Signed-off-by: Nicholas Bellinger

target: Fix virtual LUN=0 target_configure_device failure OOPs

2015-03-20T06:26:44+00:00

This patch fixes a NULL pointer dereference triggered by a late
target_configure_device() -> alloc_workqueue() failure that results
in target_free_device() being called with DF_CONFIGURED already set,
which subsequently OOPses in destroy_workqueue() code.

Currently this only happens at modprobe target_core_mod time when
core_dev_setup_virtual_lun0() -> target_configure_device() fails,
and the explicit target_free_device() gets called.

To address this bug originally introduced by commit 0fd97ccf45, go
ahead and move DF_CONFIGURED to end of target_configure_device()
code to handle this special failure case.

Reported-by: Claudio Fleiner 
Cc: Claudio Fleiner 
Cc: Christoph Hellwig 
Cc:  # v3.7+
Signed-off-by: Nicholas Bellinger

target/pscsi: Fix NULL pointer dereference in get_device_type

2015-03-20T06:26:42+00:00

This patch fixes a NULL pointer dereference OOPs with pSCSI backends
within target_core_stat.c code.  The bug is caused by a configfs attr
read if no pscsi_dev_virt->pdv_sd has been configured.

Reported-by: Olaf Hering 
Cc: 
Signed-off-by: Nicholas Bellinger

tcm_fc: missing curly braces in ft_invl_hw_context()

2015-03-20T06:26:41+00:00

This patch adds a missing set of conditional check braces in
ft_invl_hw_context() originally introduced by commit dcd998ccd
when handling DDP failures in ft_recv_write_data() code.

 commit dcd998ccdbf74a7d8fe0f0a44e85da1ed5975946
 Author: Kiran Patil 
 Date:   Wed Aug 3 09:20:01 2011 +0000

    tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data

Signed-off-by: Dan Carpenter 
Cc: Kiran Patil 
Cc:  # 3.1+
Signed-off-by: Nicholas Bellinger

target: Fix reference leak in target_get_sess_cmd() error path

2015-03-20T06:26:31+00:00

This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down
is true within target_get_sess_cmd() submission path code.

This se_cmd reference leak can occur during active session shutdown when
ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers.

Signed-off-by: Bart Van Assche 
Cc:  # 3.6+
Signed-off-by: Nicholas Bellinger

loop/usb/vhost-scsi/xen-scsiback: Fix use of __transport_register_session

2015-03-20T06:15:14+00:00

This patch changes loopback, usb-gadget, vhost-scsi and xen-scsiback
fabric code to invoke transport_register_session() instead of the
unprotected flavour, to ensure se_tpg->session_lock is taken when
adding new session list nodes to se_tpg->tpg_sess_list.

Note that since these four fabric drivers already hold their own
internal TPG mutexes when accessing se_tpg->tpg_sess_list, and
consist of a single se_session created through configfs attribute
access, no list corruption can currently occur.

So for correctness sake, go ahead and use the se_tpg->session_lock
protected version for these four fabric drivers.

Signed-off-by: Bart Van Assche 
Signed-off-by: Nicholas Bellinger

iscsi-target: Avoid early conn_logout_comp for iser connections

2015-03-20T06:10:01+00:00

This patch fixes a iser specific logout bug where early complete()
of conn->conn_logout_comp in iscsit_close_connection() was causing
isert_wait4logout() to complete too soon, triggering a use after
free NULL pointer dereference of iscsi_conn memory.

The complete() was originally added for traditional iscsi-target
when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given
iser-target does not wait in logout failure, this special case needs
to be avoided.

Reported-by: Sagi Grimberg 
Cc: Sagi Grimberg 
Cc: Slava Shwartsman 
Cc:  # v3.10+
Signed-off-by: Nicholas Bellinger

Revert "iscsi-target: Avoid IN_LOGOUT failure case for iser-target"

2015-03-20T06:01:10+00:00

This reverts commit 72859d91d93319c00a18c29f577e56bf73a8654a.

The original patch was wrong, iscsit_close_connection() still needs
to release iscsi_conn during both normal + exception IN_LOGOUT status
with ib_isert enabled.

The original OOPs is due to completing conn_logout_comp early within
iscsit_close_connection(), causing isert_wait4logout() to complete
instead of waiting for iscsit_logout_post_handler_*() to be called.

Reported-by: Sagi Grimberg 
Cc: Sagi Grimberg 
Cc: Slava Shwartsman 
Signed-off-by: Nicholas Bellinger

target: Disallow changing of WRITE cache/FUA attrs after export

2015-03-20T06:01:04+00:00

Now that incoming FUA=1 bit check is enforced for backends with FUA or
WCE disabled, go ahead and disallow the changing of related backend
attributes when active fabric exports exist.

This is required to avoid potential failures with existing initiator
LUN registrations that have been previously created with FUA=1.

Reported-by: Christoph Hellwig 
Cc: Doug Gilbert 
Cc: James Bottomley 
Cc: Ronnie Sahlberg 
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2015-02-21T21:21:19+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - Update vhost-scsi to support F_ANY_LAYOUT using mm/iov_iter.c
     logic, and signal VERSION_1 support (MST + Viro + nab)

   - Fix iscsi/iser-target to remove problematic active_ts_set usage
     (Gavin Guo)

   - Update iscsi/iser-target to support multi-sequence sendtargets
     (Sagi)

   - Fix original PR_APTPL_BUF_LEN 8k size limitation (Martin Svec)

   - Add missing WRITE_SAME end-of-device sanity check (Bart)

   - Check for LBA + sectors wrap-around in sbc_parse_cdb() (nab)

   - Other various minor SPC/SBC compliance fixes based upon Ronnie
     Sahlberg test suite (nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (32 commits)
  target: Set LBPWS10 bit in Logical Block Provisioning EVPD
  target: Fail UNMAP when emulate_tpu=0
  target: Fail WRITE_SAME w/ UNMAP=1 when emulate_tpws=0
  target: Add sanity checks for DPO/FUA bit usage
  target: Perform PROTECT sanity checks for WRITE_SAME
  target: Fail I/O with PROTECT bit when protection is unsupported
  target: Check for LBA + sectors wrap-around in sbc_parse_cdb
  target: Add missing WRITE_SAME end-of-device sanity check
  iscsi-target: Avoid IN_LOGOUT failure case for iser-target
  target: Fix PR_APTPL_BUF_LEN buffer size limitation
  iscsi-target: Drop problematic active_ts_list usage
  iscsi/iser-target: Support multi-sequence sendtargets text response
  iser-target: Remove duplicate function names
  vhost/scsi: potential memory corruption
  vhost/scsi: Global tcm_vhost -> vhost_scsi rename
  vhost/scsi: Drop left-over scsi_tcq.h include
  vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits
  vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq
  vhost/scsi: Add ANY_LAYOUT iov -> sgl mapping prerequisites
  vhost/scsi: Change vhost_scsi_map_to_sgl to accept iov ptr + len
  ...