Prevent recursion into the IO path under low memory conditions by using
GFP_NOIO in place of GFP_KERNEL when allocating a new command with
tcmu_alloc_cmd() and user ring space with tcmu_get_empty_block().

Link: https://lore.kernel.org/r/20191108082901.417950-1-damien.lemoal@wdc.com
Reported-by: Masato Suzuki <masato.suzuki@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi,
  lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The
  only core change this time around is the addition of request batching
  for virtio. Since batching requires an additional flag to use, it
  should be invisible to the rest of the drivers"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits)
  scsi: hisi_sas: Fix the conflict between device gone and host reset
  scsi: hisi_sas: Add BIST support for phy loopback
  scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation
  scsi: hisi_sas: Remove some unused function arguments
  scsi: hisi_sas: Remove redundant work declaration
  scsi: hisi_sas: Remove hisi_sas_hw.slot_complete
  scsi: hisi_sas: Assign NCQ tag for all NCQ commands
  scsi: hisi_sas: Update all the registers after suspend and resume
  scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device
  scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails
  scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled
  scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset()
  scsi: hisi_sas: add debugfs auto-trigger for internal abort time out
  scsi: virtio_scsi: unplug LUNs when events missed
  scsi: scsi_dh_rdac: zero cdb in send_mode_select()
  scsi: fcoe: fix null-ptr-deref Read in fc_release_transport
  scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code
  scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code
  scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code
  scsi: ufs: Use kmemdup in ufshcd_read_string_desc()
  ...

In tcmu_handle_completion() function, the variable called read_len is
always initialized with a value taken from se_cmd structure. If this
function is called to complete an expired (timed out) out command, the
session command pointed by se_cmd is likely to be already deallocated by
the target core at that moment. As the result, this access triggers a
use-after-free warning from KASAN.

This patch fixes the code not to touch se_cmd when completing timed out
TCMU commands. It also resets the pointer to se_cmd at the time when the
TCMU_CMD_BIT_EXPIRED flag is set because it is going to become invalid
after calling target_complete_cmd() later in the same function,
tcmu_check_expired_cmd().

Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

If the userspace process crashes while we send the nl msg, it is possible
that the cmd in curr_nl_cmd of tcmu_dev never gets reset to 0, and and
returns busy for other commands after the userspace process is restartd.

More details below:

/backstores/user:file/file> set attribute dev_size=2048
Cannot set attribute dev_size: [Errno 3] No such process
/backstores/user:file/file> set attribute dev_size=2048
Cannot set attribute dev_size: [Errno 16] Device or resource busy

with following kernel messages:
[173605.747169] Unable to reconfigure device
[173616.686674] tcmu daemon: command reply support 1.
[173623.866978] netlink cmd 3 already executing on file
[173623.866984] Unable to reconfigure device

Also, it is not safe to leave the nl_cmd in the list, and not get deleted.

This patch removes the nl_cmd from the list, and clear its data if it is
not sent successfully.

Signed-off-by: Li Zhong <lizhongfs@gmail.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Pull SCSI updates from James Bottomley:
 "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
  mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
  removal of the osst driver (I heard from Willem privately that he
  would like the driver removed because all his test hardware has
  failed). Plus number of minor changes, spelling fixes and other
  trivia.

  The big merge conflict this time around is the SPDX licence tags.
  Following discussion on linux-next, we believe our version to be more
  accurate than the one in the tree, so the resolution is to take our
  version for all the SPDX conflicts"

Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.

In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").

In these cases I picked the new-style one.

In a few cases, the SPDX conversion was actually different, though.  As
explained by James above, and in more detail in a pre-pull-request
thread:

 "The other problem is actually substantive: In the libsas code Luben
  Tuikov originally specified gpl 2.0 only by dint of stating:

  * This file is licensed under GPLv2.

  In all the libsas files, but then muddied the water by quoting GPLv2
  verbatim (which includes the or later than language). So for these
  files Christoph did the conversion to v2 only SPDX tags and Thomas
  converted to v2 or later tags"

So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.

Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.

Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style.  The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
  scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
  scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
  scsi: qla2xxx: on session delete, return nvme cmd
  scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
  scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
  scsi: megaraid_sas: Introduce various Aero performance modes
  scsi: megaraid_sas: Use high IOPS queues based on IO workload
  scsi: megaraid_sas: Set affinity for high IOPS reply queues
  scsi: megaraid_sas: Enable coalescing for high IOPS queues
  scsi: megaraid_sas: Add support for High IOPS queues
  scsi: megaraid_sas: Add support for MPI toolbox commands
  scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
  scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
  scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
  scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
  scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
  scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
  scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
  scsi: megaraid_sas: Call disable_irq from process IRQ poll
  scsi: megaraid_sas: Remove few debug counters from IO path
  ...

Use 'kasprintf()' instead of:
   - snprintf(NULL, 0...
   - kmalloc(...
   - snprintf(...

This is less verbose and saves 7 bytes (i.e. the space for '/(null)') if
'udev->dev_config' is NULL.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms and conditions of the gnu general public license
  version 2 as published by the free software foundation this program
  is distributed in the hope it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not write to the free
  software foundation inc 51 franklin st fifth floor boston ma 02110
  1301 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 111 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add options to strictly validate messages and dump messages,
sometimes perhaps validating dump messages non-strictly may
be required, so add an option for that as well.

Since none of this can really be applied to existing commands,
set the options everwhere using the following spatch:

    @@
    identifier ops;
    expression X;
    @@
    struct genl_ops ops[] = {
    ...,
     {
            .cmd = X,
    +       .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
            ...
     },
    ...
    };

For new commands one should just not copy the .validate 'opt-out'
flags and thus get strict validation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since maxattr is common, the policy can't really differ sanely,
so make it common as well.

The only user that did in fact manage to make a non-common policy
is taskstats, which has to be really careful about it (since it's
still using a common maxattr!). This is no longer supported, but
we can fake it using pre_doit.

This reduces the size of e.g. nl80211.o (which has lots of commands):

   text	   data	    bss	    dec	    hex	filename
 398745	  14323	   2240	 415308	  6564c	net/wireless/nl80211.o (before)
 397913	  14331	   2240	 414484	  65314	net/wireless/nl80211.o (after)
--------------------------------
   -832      +8       0    -824

Which is obviously just 8 bytes for each command, and an added 8
bytes for the new policy pointer. I'm not sure why the ops list is
counted as .text though.

Most of the code transformations were done using the following spatch:
    @ops@
    identifier OPS;
    expression POLICY;
    @@
    struct genl_ops OPS[] = {
    ...,
     {
    -	.policy = POLICY,
     },
    ...
    };

    @@
    identifier ops.OPS;
    expression ops.POLICY;
    identifier fam;
    expression M;
    @@
    struct genl_family fam = {
            .ops = OPS,
            .maxattr = M,
    +       .policy = POLICY,
            ...
    };

This also gets rid of devlink_nl_cmd_region_read_dumpit() accessing
the cb->data as ops, which we want to change in a later genl patch.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>