linux.git/drivers/target/target_core_user.c, branch v4.18 Linux kernel source tree scsi: target: tcmu: add read length support 2018-06-19T01:02:52+00:00 bstroesser@ts.fujitsu.com bstroesser@ts.fujitsu.com 2018-05-24T16:49:41+00:00 6c3796d130ed2860489885a934dcb7bb334d5eb0 Generally target core and TCMUser seem to work fine for tape devices and media changers. But there is at least one situation where TCMUser is not able to support sequential access device emulation correctly. The situation is when an initiator sends a SCSI READ CDB with a length that is greater than the length of the tape block to read. We can distinguish two subcases: A) The initiator sent the READ CDB with the SILI bit being set. In this case the sequential access device has to transfer the data from the tape block (only the length of the tape block) and transmit a good status. The current interface between TCMUser and the userspace does not support reduction of the read data size by the userspace program. The patch below fixes this subcase by allowing the userspace program to specify a reduced data size in read direction. B) The initiator sent the READ CDB with the SILI bit not being set. In this case the sequential access device has to transfer the data from the tape block as in A), but additionally has to transmit CHECK CONDITION with the ILI bit set and NO SENSE in the sensebytes. The information field in the sensebytes must contain the residual count. With the below patch a user space program can specify the real read data length and appropriate sensebytes. TCMUser then uses the se_cmd flag SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data size and the sensebytes. Note: the flag SCF_TREAT_READ_AS_NORMAL is introduced by Lee Duncan's patch "[PATCH v4] target: transport should handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700. Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Acked-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Generally target core and TCMUser seem to work fine for tape devices and
media changers.  But there is at least one situation where TCMUser is not
able to support sequential access device emulation correctly.

The situation is when an initiator sends a SCSI READ CDB with a length that
is greater than the length of the tape block to read. We can distinguish
two subcases:

A) The initiator sent the READ CDB with the SILI bit being set.

   In this case the sequential access device has to transfer the data from
   the tape block (only the length of the tape block) and transmit a good
   status.  The current interface between TCMUser and the userspace does
   not support reduction of the read data size by the userspace program.

   The patch below fixes this subcase by allowing the userspace program to
   specify a reduced data size in read direction.

B) The initiator sent the READ CDB with the SILI bit not being set.

   In this case the sequential access device has to transfer the data from
   the tape block as in A), but additionally has to transmit CHECK
   CONDITION with the ILI bit set and NO SENSE in the sensebytes. The
   information field in the sensebytes must contain the residual count.

   With the below patch a user space program can specify the real read data
   length and appropriate sensebytes.  TCMUser then uses the se_cmd flag
   SCF_TREAT_READ_AS_NORMAL, to force target core to transmit the real data
   size and the sensebytes.  Note: the flag SCF_TREAT_READ_AS_NORMAL is
   introduced by Lee Duncan's patch "[PATCH v4] target: transport should
   handle st FM/EOM/ILI reads" from Tue, 15 May 2018 18:25:24 -0700.

Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
treewide: kzalloc() -> kcalloc() 2018-06-12T23:19:22+00:00 Kees Cook keescook@chromium.org 2018-06-12T21:03:40+00:00 6396bb221514d2876fd6dc0aa2a1f240d99b37bb The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org> 
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi 2018-06-10T20:01:12+00:00 Linus Torvalds torvalds@linux-foundation.org 2018-06-10T20:01:12+00:00 5f85942c2ea2ed59d8f19c954bbb0f5c1a2ebdd1 Pull SCSI updates from James Bottomley: "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc, xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also taking target updates which are mostly minor except for the tcmu refactor. The only real core change to worry about is the removal of high page bouncing (in sas, storvsc and iscsi). This has been well tested and no problems have shown up so far" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits) scsi: lpfc: update driver version to 12.0.0.4 scsi: lpfc: Fix port initialization failure. scsi: lpfc: Fix 16gb hbas failing cq create. scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc scsi: lpfc: correct oversubscription of nvme io requests for an adapter scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx) scsi: hisi_sas: Mark PHY as in reset for nexus reset scsi: hisi_sas: Fix return value when get_free_slot() failed scsi: hisi_sas: Terminate STP reject quickly for v2 hw scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot scsi: hisi_sas: Try wait commands before before controller reset scsi: hisi_sas: Init disks after controller reset scsi: hisi_sas: Create a scsi_host_template per HW module scsi: hisi_sas: Reset disks when discovered scsi: hisi_sas: Add LED feature for v3 hw scsi: hisi_sas: Change common allocation mode of device id scsi: hisi_sas: change slot index allocation mode scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() scsi: hisi_sas: fix a typo in hisi_sas_task_prep() ... 
Pull SCSI updates from James Bottomley:
 "This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
  xfcp, hisi_sas, cxlflash, qla2xxx.

  In the absence of Nic, we're also taking target updates which are
  mostly minor except for the tcmu refactor.

  The only real core change to worry about is the removal of high page
  bouncing (in sas, storvsc and iscsi). This has been well tested and no
  problems have shown up so far"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (268 commits)
  scsi: lpfc: update driver version to 12.0.0.4
  scsi: lpfc: Fix port initialization failure.
  scsi: lpfc: Fix 16gb hbas failing cq create.
  scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
  scsi: lpfc: correct oversubscription of nvme io requests for an adapter
  scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
  scsi: hisi_sas: Mark PHY as in reset for nexus reset
  scsi: hisi_sas: Fix return value when get_free_slot() failed
  scsi: hisi_sas: Terminate STP reject quickly for v2 hw
  scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
  scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
  scsi: hisi_sas: Try wait commands before before controller reset
  scsi: hisi_sas: Init disks after controller reset
  scsi: hisi_sas: Create a scsi_host_template per HW module
  scsi: hisi_sas: Reset disks when discovered
  scsi: hisi_sas: Add LED feature for v3 hw
  scsi: hisi_sas: Change common allocation mode of device id
  scsi: hisi_sas: change slot index allocation mode
  scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
  scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
  ...
scsi: target: tcmu: fix error resetting qfull_time_out to default 2018-05-15T02:44:50+00:00 Prasanna Kumar Kalever prasanna.kalever@redhat.com 2018-05-10T13:42:18+00:00 125966db1fea12575ee21b2b3fc95a59032406f0 Problem: $ cat /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out -1 $ echo "-1" > /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out -bash: echo: write error: Invalid argument Fix: This patch will help reset qfull_time_out to its default i.e. qfull_time_out=-1. Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Problem:

$ cat /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out
-1

$ echo "-1" > /sys/kernel/config/target/core/user_0/block/attrib/qfull_time_out
-bash: echo: write error: Invalid argument

Fix:

This patch will help reset qfull_time_out to its default
i.e. qfull_time_out=-1.

Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: tcmu: refactor nl wr_cache attr with new helpers 2018-05-08T05:52:50+00:00 Zhu Lingshan lszhu@suse.com 2018-05-02T03:13:44+00:00 33d065ccb3b21e38412cd8c7d6f2704e3b341f63 use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_WRITECACHE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also emulate_write_cache in configFS. Removed tcmu_netlink_event() since we have new netlink events helpers now. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_WRITECACHE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
emulate_write_cache in configFS.

Removed tcmu_netlink_event() since we have new netlink
events helpers now.

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: tcmu: refactor nl dev_size attr with new helpers 2018-05-08T05:52:50+00:00 Zhu Lingshan lszhu@suse.com 2018-05-02T03:13:43+00:00 84e285062848d9bca20b60827d26b7c72101c184 use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_DEV_SIZE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also dev_size in configFS. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_DEV_SIZE(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
dev_size in configFS.

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: tcmu: refactor nl dev_cfg attr with new nl helpers 2018-05-08T05:52:50+00:00 Zhu Lingshan lszhu@suse.com 2018-05-02T03:13:42+00:00 02ccfb54ba7e73c47ce401920af8cf7a0c7bcaca use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event attribute TCMU_ATTR_DEV_CFG(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also dev_config in configFS. Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event attribute
TCMU_ATTR_DEV_CFG(belongs to TCMU_CMD_RECONFIG_DEVICE) which is also
dev_config in configFS.

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: tcmu: refactor rm_device cmd with new nl helpers 2018-05-08T05:52:50+00:00 Zhu Lingshan lszhu@suse.com 2018-05-02T03:13:41+00:00 f892bd8ec14226d681021ef6e4c0cd2d5ca08e8d use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event TCMU_CMD_REMOVED_DEVICE Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event TCMU_CMD_REMOVED_DEVICE

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: tcmu: refactor add_device cmd with new nl helpers 2018-05-08T05:52:49+00:00 Zhu Lingshan lszhu@suse.com 2018-05-02T03:13:40+00:00 e0c240ac3aec565360bd38fae9e991b2ce376787 use new netlink events helpers tcmu_netlink_init() and tcmu_netlink_send() to refactor netlink event TCMU_CMD_ADDED_DEVICE Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
use new netlink events helpers tcmu_netlink_init() and
tcmu_netlink_send() to refactor netlink event TCMU_CMD_ADDED_DEVICE

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: tcmu: add new netlink events helpers 2018-05-08T05:52:49+00:00 Zhu Lingshan lszhu@suse.com 2018-05-02T03:13:39+00:00 0e5aee393956f14b82c42486aefc327ba594ca60 Add new netlink events helpers tcmu_netlink_event_init() and tcmu_netlink_event_send(). These new functions intend to replace existing netlink events helper function tcmu_netlink_event(). The existing function tcmu_netlink_event() works well for events like TCMU_ADDED_DEVICE and TCMU_REMOVED_DEVICE which only has one netlink attribute. But if there is a command requires more than one attributes to send out, we have to use a struct to adapt the paremeter reconfig_data, it is hard to use one struct or a union in one struct to adapt every command with different attributes, it may get long and ugly. With the new two functions, we can call tcmu_netlink_event_init() to initialize a netlink event, then add all attributes we need by using nla_put_xxx(), at last use tcmu_netlink_event_send() to send it out. So that we don't need to use a long struct or union if we want to send mulitple attributes for different commands. [mkp: typos] Signed-off-by: Zhu Lingshan <lszhu@suse.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 
Add new netlink events helpers tcmu_netlink_event_init() and
tcmu_netlink_event_send(). These new functions intend to replace
existing netlink events helper function tcmu_netlink_event().

The existing function tcmu_netlink_event() works well for events like
TCMU_ADDED_DEVICE and TCMU_REMOVED_DEVICE which only has one netlink
attribute. But if there is a command requires more than one attributes
to send out, we have to use a struct to adapt the paremeter
reconfig_data, it is hard to use one struct or a union in one struct to
adapt every command with different attributes, it may get long and ugly.

With the new two functions, we can call tcmu_netlink_event_init() to
initialize a netlink event, then add all attributes we need by using
nla_put_xxx(), at last use tcmu_netlink_event_send() to send it out. So
that we don't need to use a long struct or union if we want to send
mulitple attributes for different commands.

[mkp: typos]

Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Acked-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>