linux.git/drivers/target/target_core_device.c, branch v3.15

target: Don't allow setting WC emulation if device doesn't support

2014-05-16T00:09:17+00:00

Just like for pSCSI, if the transport sets get_write_cache, then it is
not valid to enable write cache emulation for it. Return an error.

see https://bugzilla.redhat.com/show_bug.cgi?id=1082675

Reviewed-by: Chris Leech 
Signed-off-by: Andy Grover 
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger

target: Allow non-supporting backends to set pi_prot_type to 0

2014-05-16T00:08:51+00:00

Userspace tools assume if a value is read from configfs, it is valid
and will not cause an error if the same value is written back. The only
valid value for pi_prot_type for backends not supporting DIF is 0, so allow
this particular value to be set without returning an error.

Reported-by: Krzysztof Chojnowski 
Signed-off-by: Andy Grover 
Reviewed-by: Sagi Grimberg 
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending

2014-01-31T23:31:23+00:00

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

  - add support for SCSI Referrals (Hannes)
  - add support for T10 DIF into target core (nab + mkp)
  - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab)
  - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab)
  - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi)
  - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn)
  - allow percpu_ida_alloc() to receive task state bitmask (Kent)
  - fix >= v3.12 iscsi-target session reset hung task regression (nab)
  - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab)
  - fix a long-standing network portal creation race (Andy)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits)
  target: Fix percpu_ref_put race in transport_lun_remove_cmd
  target/iscsi: Fix network portal creation race
  target: Report bad sector in sense data for DIF errors
  iscsi-target: Convert gfp_t parameter to task state bitmask
  iscsi-target: Fix connection reset hang with percpu_ida_alloc
  percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask
  iscsi-target: Pre-allocate more tags to avoid ack starvation
  qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport
  qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO.
  qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure
  IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine
  IB/isert: Move fastreg descriptor creation to a function
  IB/isert: Avoid frwr notation, user fastreg
  IB/isert: seperate connection protection domains and dma MRs
  tcm_loop: Enable DIF/DIX modes in SCSI host LLD
  target/rd: Add DIF protection into rd_execute_rw
  target/rd: Add support for protection SGL setup + release
  target/rd: Refactor rd_build_device_space + rd_release_device_space
  target/file: Add DIF protection support to fd_execute_rw
  target/file: Add DIF protection init/format support
  ...

target/configfs: Expose protection device attributes

2014-01-18T09:57:47+00:00

This patch adds support for exposing DIF protection device
attributes via configfs.  This includes:

   pi_prot_type: Protection Type (0, 1, 3 currently support)
   pi_prot_format: Protection Format Operation (FILEIO only)

Within se_dev_set_pi_prot_type() it also adds the se_subsystem_api
device callbacks to setup per device protection information.

v2 changes:
  - Drop pi_guard_type + pi_prot_version related code (MKP)
  - Add pi_prot_format logic (Sagi)
  - Add ->free_prot callback in target_free_device
  - Add hw_pi_prot_type read-only attribute

Cc: Martin K. Petersen 
Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Sagi Grimberg 
Cc: Or Gerlitz 
Signed-off-by: Nicholas Bellinger

target_core_alua: Referrals configfs integration

2014-01-10T05:48:35+00:00

Referrals need an LBA map, which needs to be kept
consistent across all target port groups. So
instead of tying the map to the target port groups
I've implemented a single attribute containing the
entire map.

Signed-off-by: Hannes Reinecke 
Signed-off-by: Nicholas Bellinger

target_core_alua: Referrals infrastructure

2014-01-10T05:48:17+00:00

Add infrastructure for referrals.

v2 changes:

 - Fix unsigned long long division in core_alua_state_lba_dependent on
   32-bit  (Fengguang + Chen + Hannes)
 - Fix compile warning in core_alua_state_lba_dependent (nab)
 - Convert segment_* + sectors variables in core_alua_state_lba_dependent
   to u64 (Hannes)

Signed-off-by: Hannes Reinecke 
Signed-off-by: Nicholas Bellinger

target/file: Update hw_max_sectors based on current block_size

2013-12-19T08:18:54+00:00

This patch allows FILEIO to update hw_max_sectors based on the current
max_bytes_per_io.  This is required because vfs_[writev,readv]() can accept
a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really
needs to be calculated based on block_size.

This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M
sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for
the block_size=4096 case.

(v2: Use max_bytes_per_io instead of ->update_hw_max_sectors)

Reported-by: Henrik Goldman 
Cc:  #3.5+
Signed-off-by: Nicholas Bellinger

target: Rename core_tpg_{pre,post}_addlun for clarity

2013-12-16T21:28:19+00:00

"pre" is really an allocation function. The only time it isn't called is
for virtual_lun0, which is statically allocated. Renaming that to "alloc"
lets the other function not need to be "post", and just be called
core_tpg_add_lun.

(nab: fix minor applying fuzz in core_tpg_setup_virtual_lun0)

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

target: Refer to u32 luns as unpacked_lun

2013-12-16T21:24:38+00:00

It's clearer to refer to pointers to the struct se_lun as "lun" and the
actual number itself as "unpacked_lun".

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

target core: rename (ex,im)plict -> (ex,im)plicit

2013-11-20T19:24:40+00:00

Signed-off-by: Hannes Reinecke 
Signed-off-by: Nicholas Bellinger