linux.git/drivers/target/target_core_device.c, branch v3.12

target: Update copyright ownership/year information to 2013

2013-09-11T03:23:36+00:00

Update copyright ownership/year information for target-core,
loopback, iscsi-target, tcm_qla2xx, vhost and iser-target.

Signed-off-by: Nicholas Bellinger

target: Add Third Party Copy (3PC) bit in INQUIRY response

2013-09-10T23:48:46+00:00

This patch adds the Third Party Copy (3PC) bit to signal support
for EXTENDED_COPY within standard inquiry response data.

Also add emulate_3pc device attribute in configfs (enabled by default)
to allow the exposure of this bit to be disabled, if necessary.

Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Martin Petersen 
Cc: Chris Mason 
Cc: Roland Dreier 
Cc: Zach Brown 
Cc: James Bottomley 
Cc: Nicholas Bellinger 
Signed-off-by: Nicholas Bellinger

target: Add global device list for EXTENDED_COPY

2013-09-10T23:48:40+00:00

EXTENDED_COPY needs to be able to search a global list of devices
based on NAA WWN device identifiers, so add a simple g_device_list
protected by g_device_mutex.

Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Martin Petersen 
Cc: Chris Mason 
Cc: Roland Dreier 
Cc: Zach Brown 
Cc: James Bottomley 
Cc: Nicholas Bellinger 
Signed-off-by: Nicholas Bellinger

target: Add support for COMPARE_AND_WRITE emulation

2013-09-10T23:41:59+00:00

This patch adds support for COMPARE_AND_WRITE emulation on a per block
basis.  This logic is used as an atomic test and set primative currently
used by VMWare ESX VAAI for performing array side locking of individual
VMFS extent ownership.

This includes the COMPARE_AND_WRITE CDB parsing within sbc_parse_cdb(),
and does the majority of the work within the compare_and_write_callback()
to perform the verify instance user data comparision, and subsequent
write instance user data I/O submission upon a successfull comparision.

The synchronization is enforced by se_device->caw_sem, that is obtained
before the initial READ I/O submission in sbc_compare_and_write().  The
mutex is then released upon MISCOMPARE in compare_and_write_callback(),
or upon WRITE instance user-data completion in compare_and_write_post().

The implementation currently assumes a single logical block (NoLB=1).

v4 changes:
 - Explicitly clear cmd->transport_complete_callback for two failure
   cases in sbc_compare_and_write() in order to avoid double unlock
   of ->caw_sem in compare_and_write_callback() (Dan Carpenter)

v3 changes:
 - Convert se_device->caw_mutex to ->caw_sem

v2 changes:
 - Set SCF_COMPARE_AND_WRITE and cmd->execute_cmd() to
   sbc_compare_and_write() during setup in sbc_parse_cdb()
 - Use sbc_compare_and_write() for initial READ submission with
   DMA_FROM_DEVICE
 - Reset cmd->execute_cmd() to sbc_execute_rw() for write instance
   user-data in compare_and_write_callback()
 - Drop SCF_BIDI command flag usage
 - Set TRANSPORT_PROCESSING + transport_state flags before write
   instance submission, and convert to __target_execute_cmd()
 - Prevent sbc_get_size() from being being called twice to
   generate incorrect size in sbc_parse_cdb()
 - Enforce se_device->caw_mutex synchronization between initial
   READ I/O submission, and final WRITE I/O completion.

Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Martin Petersen 
Cc: Chris Mason 
Cc: James Bottomley 
Cc: Nicholas Bellinger 
Signed-off-by: Nicholas Bellinger

target: Add MAXIMUM COMPARE AND WRITE LENGTH in Block Limits VPD

2013-09-09T21:29:35+00:00

This patch adds the MAXIMUM COMPARE AND WRITE LENGTH bit, currently
hardcoded to a single logical block (NoLB=1) within the Block Limits
VPD in spc_emulate_evpd_b0().

Also add emulate_caw device attribute in configfs (enabled by default)
to allow the exposure of this bit to be disabled, if necessary.

Cc: Christoph Hellwig 
Cc: Hannes Reinecke 
Cc: Martin Petersen 
Cc: Chris Mason 
Cc: James Bottomley 
Cc: Nicholas Bellinger 
Signed-off-by: Nicholas Bellinger

target: Make virtual_lun0 a nullio device

2013-06-14T07:27:32+00:00

Nobody should be expecting to read or write virtual_lun0.

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

target: Remove t10_reservation.pr_aptpl_buf_len

2013-06-14T07:04:46+00:00

It's only ever set to PR_APTPL_BUF_LEN, so we don't need a variable.

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

target: Remove unused struct members in se_dev_entry

2013-05-03T23:42:18+00:00

Some were incremented, but never used anywhere from what I could tell.

Signed-off-by: Andy Grover 
Signed-off-by: Nicholas Bellinger

target: Fix lookup of dynamic NodeACLs during cached demo-mode operation

2013-02-19T02:47:20+00:00

This patch fixes a bug in core_tpg_check_initiator_node_acl() ->
core_tpg_get_initiator_node_acl() where a dynamically created
se_node_acl generated during session login would be skipped during
subsequent lookup due to the '!acl->dynamic_node_acl' check, causing
a new se_node_acl to be created with a duplicate ->initiatorname.

This would occur when a fabric endpoint was configured with
TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1
preventing the release of an existing se_node_acl during se_session
shutdown.

Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl()
within core_dev_init_initiator_node_lun_acl() that originally
required the extra '!acl->dynamic_node_acl' check, and just pass
the configfs provided se_node_acl pointer instead.

Cc: 
Signed-off-by: Nicholas Bellinger

target: Add device attribute to expose config_item_name for INQUIRY model

2013-02-13T19:27:58+00:00

This patch changes LIO to use the configfs backend device name as the
model if you echo '1' to an individual device's emulate_model_alias attribute.
This is a valid operation only on devices with an export count of 0.

Signed-off-by: Tregaron Bayly 
Signed-off-by: Nicholas Bellinger