Once upon a time back in 2009, a work-around was added to support
the GlobalSAN iSCSI initiator v3.3 for MacOSX, which during login
did not propose nor respond to MaxBurstLength, FirstBurstLength,
DefaultTime2Wait and DefaultTime2Retain keys.

The work-around in iscsi_check_proposer_for_optional_reply()
allowed the missing keys to be proposed, but did not require
waiting for a response before moving to full feature phase
operation.  This allowed GlobalSAN v3.3 to work out-of-the
box, and for many years we didn't run into login interopt
issues with any other initiators..

Until recently, when Martin tried a QLogic 57840S iSCSI Offload
HBA on Windows 2016 which completed login, but subsequently
failed with:

    Got unknown iSCSI OpCode: 0x43

The issue was QLogic MSFT side did not propose DefaultTime2Wait +
DefaultTime2Retain, so LIO proposes them itself, and immediately
transitions to full feature phase because of the GlobalSAN hack.
However, the QLogic MSFT side still attempts to respond to
DefaultTime2Retain + DefaultTime2Wait, even though LIO has set
ISCSI_FLAG_LOGIN_NEXT_STAGE3 + ISCSI_FLAG_LOGIN_TRANSIT
in last login response.

So while the QLogic MSFT side should have been proposing these
two keys to start, it was doing the correct thing per RFC-3720
attempting to respond to proposed keys before transitioning to
full feature phase.

All that said, recent versions of GlobalSAN iSCSI (v5.3.0.541)
does correctly propose the four keys during login, making the
original work-around moot.

So in order to allow QLogic MSFT to run unmodified as-is, go
ahead and drop this long standing work-around.

Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Martin Svec <martin.svec@zoner.cz>
Cc: Himanshu Madhani <Himanshu.Madhani@cavium.com>
Cc: Arun Easi <arun.easi@cavium.com>
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch changes iscsi-target to propagate iscsit_transport
->iscsit_queue_data_in() and ->iscsit_queue_status() callback
errors, back up into target-core.

This allows target-core to retry failed iscsit_transport
callbacks using internal queue-full logic.

Reported-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Tested-by: Potnuri Bharat Teja <bharat@chelsio.com>
Cc: Potnuri Bharat Teja <bharat@chelsio.com>
Reported-by: Steve Wise <swise@opengridcomputing.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

This patch fixes a iscsi-target specific TMR reference leak
during session shutdown, that could occur when a TMR was
quiesced before the hand-off back to iscsi-target code
via transport_cmd_check_stop_to_fabric().

The reference leak happens because iscsit_free_cmd() was
incorrectly skipping the final target_put_sess_cmd() for
TMRs when transport_generic_free_cmd() returned zero because
the se_cmd->cmd_kref did not reach zero, due to the missing
se_cmd assignment in original code.

The result was iscsi_cmd and it's associated se_cmd memory
would be freed once se_sess->sess_cmd_map where released,
but the associated se_tmr_req was leaked and remained part
of se_device->dev_tmr_list.

This bug would manfiest itself as kernel paging request
OOPsen in core_tmr_lun_reset(), when a left-over se_tmr_req
attempted to dereference it's se_cmd pointer that had
already been released during normal session shutdown.

To address this bug, go ahead and treat ISCSI_OP_SCSI_CMD
and ISCSI_OP_SCSI_TMFUNC the same when there is an extra
se_cmd->cmd_kref to drop in iscsit_free_cmd(), and use
op_scsi to signal __iscsit_free_cmd() when the former
needs to clear any further iscsi related I/O state.

Reported-by: Rob Millner <rlm@daterainc.com>
Cc: Rob Millner <rlm@daterainc.com>
Reported-by: Chu Yuan Lin <cyl@datera.io>
Cc: Chu Yuan Lin <cyl@datera.io>
Tested-by: Chu Yuan Lin <cyl@datera.io>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Pull sched.h split-up from Ingo Molnar:
 "The point of these changes is to significantly reduce the
  <linux/sched.h> header footprint, to speed up the kernel build and to
  have a cleaner header structure.

  After these changes the new <linux/sched.h>'s typical preprocessed
  size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K
  lines), which is around 40% faster to build on typical configs.

  Not much changed from the last version (-v2) posted three weeks ago: I
  eliminated quirks, backmerged fixes plus I rebased it to an upstream
  SHA1 from yesterday that includes most changes queued up in -next plus
  all sched.h changes that were pending from Andrew.

  I've re-tested the series both on x86 and on cross-arch defconfigs,
  and did a bisectability test at a number of random points.

  I tried to test as many build configurations as possible, but some
  build breakage is probably still left - but it should be mostly
  limited to architectures that have no cross-compiler binaries
  available on kernel.org, and non-default configurations"

* 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits)
  sched/headers: Clean up <linux/sched.h>
  sched/headers: Remove #ifdefs from <linux/sched.h>
  sched/headers: Remove the <linux/topology.h> include from <linux/sched.h>
  sched/headers, hrtimer: Remove the <linux/wait.h> include from <linux/hrtimer.h>
  sched/headers, x86/apic: Remove the <linux/pm.h> header inclusion from <asm/apic.h>
  sched/headers, timers: Remove the <linux/sysctl.h> include from <linux/timer.h>
  sched/headers: Remove <linux/magic.h> from <linux/sched/task_stack.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/init.h>
  sched/core: Remove unused prefetch_stack()
  sched/headers: Remove <linux/rculist.h> from <linux/sched.h>
  sched/headers: Remove the 'init_pid_ns' prototype from <linux/sched.h>
  sched/headers: Remove <linux/signal.h> from <linux/sched.h>
  sched/headers: Remove <linux/rwsem.h> from <linux/sched.h>
  sched/headers: Remove the runqueue_is_locked() prototype
  sched/headers: Remove <linux/sched.h> from <linux/sched/hotplug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/debug.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/nohz.h>
  sched/headers: Remove <linux/sched.h> from <linux/sched/stat.h>
  sched/headers: Remove the <linux/gfp.h> include from <linux/sched.h>
  sched/headers: Remove <linux/rtmutex.h> from <linux/sched.h>
  ...

Pull vfs sendmsg updates from Al Viro:
 "More sendmsg work.

  This is a fairly separate isolated stuff (there's a continuation
  around lustre, but that one was too late to soak in -next), thus the
  separate pull request"

* 'work.sendmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ncpfs: switch to sock_sendmsg()
  ncpfs: don't mess with manually advancing iovec on send
  ncpfs: sendmsg does *not* bugger iovec these days
  ceph_tcp_sendpage(): use ITER_BVEC sendmsg
  afs_send_pages(): use ITER_BVEC
  rds: remove dead code
  ceph: switch to sock_recvmsg()
  usbip_recv(): switch to sock_recvmsg()
  iscsi_target: deal with short writes on the tx side
  [nbd] pass iov_iter to nbd_xmit()
  [nbd] switch sock_xmit() to sock_{send,recv}msg()
  [drbd] use sock_sendmsg()

Pull SCSI target updates from Nicholas Bellinger:
 "The highlights this round include:

   - enable dual mode (initiator + target) qla2xxx operation. (Quinn +
     Himanshu)

   - add a framework for qla2xxx async fabric discovery. (Quinn +
     Himanshu)

   - enable iscsi PDU DDP completion offload in cxgbit/T6 NICs. (Varun)

   - fix target-core handling of aborted failed commands. (Bart)

   - fix a long standing target-core issue NULL pointer dereference with
     active I/O LUN shutdown. (Rob Millner + Bryant + nab)"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (44 commits)
  target: Add counters for ABORT_TASK success + failure
  iscsi-target: Fix early login failure statistics misses
  target: Fix NULL dereference during LUN lookup + active I/O shutdown
  target: Delete tmr from list before processing
  target: Fix handling of aborted failed commands
  uapi: fix linux/target_core_user.h userspace compilation errors
  target: export protocol identifier
  qla2xxx: Fix a warning reported by the "smatch" static checker
  target/iscsi: Fix unsolicited data seq_end_offset calculation
  target/cxgbit: add T6 iSCSI DDP completion feature
  target/cxgbit: Enable DDP for T6 only if data sequence and pdu are in order
  target/cxgbit: Use T6 specific macros to get ETH/IP hdr len
  target/cxgbit: use cxgb4_tp_smt_idx() to get smt idx
  target/iscsi: split iscsit_check_dataout_hdr()
  target: Remove command flag CMD_T_DEV_ACTIVE
  target: Remove command flag CMD_T_BUSY
  target: Move session check from target_put_sess_cmd() into target_release_cmd_kref()
  target: Inline transport_cmd_check_stop()
  target: Remove an overly chatty debug message
  target: Stop execution if CMD_T_STOP has been set
  ...

Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.

Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.

Include the new header in the files that are going to need it.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Due to the long standing checks in iscsit_snmp_get_tiqn()
that assume conn->sess->tpg dereference of tpg->tpg_tiqn
for iscsit_collect_login_stats() usage, some of the early
login failure cases like ISCSI_LOGIN_STATUS_TGT_FORBIDDEN
where not getting incremented, due to sess->tpg assignment
happening later in iscsi_login_zero_tsih_s2().

Instead, use the earlier conn->tpg assignment done by
iscsi_target_locate_portal() -> iscsit_get_tpg_from_np()
so the existing counters are incremented correctly for
the various early login failure cases.

Also, go ahead and drop the old rate limiting check in
iscsit_collect_login_stats(), so we get the true number
of failed login attempts in the existing statistics.

Reported-by: Ryan Stiles <ras@datera.io>
Cc: Ryan Stiles <ras@datera.io>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

In case of unsolicited data for the first sequence
seq_end_offset must be set to minimum of total data length
and FirstBurstLength, so do not add cmd->write_data_done
to the min of total data length and FirstBurstLength.

This patch avoids that with ImmediateData=Yes, InitialR2T=No,
MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command
with IO size above FirstBurstLength triggers sequence error
messages, for example

Set following parameters on target (linux-4.8.12)
ImmediateData = Yes
InitialR2T = No
MaxXmitDataSegmentLength = 8k
FirstBurstLength = 64k

Log in from Open iSCSI initiator and execute
dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct

Error messages on target
Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside
of Sequence 73728:131072 while DataSequenceInOrder=Yes.
Command ITT: 0x00000035, received DataSN: 0x00000001 higher than
expected 0x00000000.
Unable to perform within-command recovery while ERL=0.

Signed-off-by: Varun Prakash <varun@chelsio.com>
[ bvanassche: Use min() instead of open-coding it / edited patch description ]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>