Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates for 7.2-rc1.

  Nothing major in here, just constant grind of tiny cleanups and coding
  style fixes and wrapper removals. Overall more code was removed than
  added, always a nice sign that things are progressing forward.

  Changes outside of drivers/staging/ was due to the octeon driver
  changes, which for some reason also lives partially in the mips
  subsystem, someday that all will be untangled and cleaned up, or just
  removed entirely, it's hard to tell which is going to be its fate.

  Other than octeon driver cleanups, in here are the usual:

   - rtl8723bs driver reworking and cleanups, being the bulk of this
     merge window given all of the issues and wrappers involved in that
     beast of a driver

   - most driver cleanups

   - sm750fb driver cleanups (which might be done, as this really should
     be moved to the drm layer one of these days...)

   - other tiny staging driver cleanups and fixes

  All of these have been in linux-next for many weeks with no reported
  issues"

* tag 'staging-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (199 commits)
  staging: most: video: avoid double free on video register failure
  staging: sm750: rename CamelCase variable Bpp to bpp
  staging: rtl8723bs: delete superfluous switch statement
  staging: sm750fb: Mark g_noaccel, g_nomtrr and g_dualview as __ro_after_init
  staging: rtl8723bs: propagate errno through hal xmit path
  staging: rtl8723bs: propagate errno through xmit enqueue path
  staging: rtl8723bs: convert rtw_xmit_classifier to return errno
  staging: rtl8723bs: make rtw_xmit_classifier static
  staging: rtl8723bs: simplify rtw_xmit_classifier control flow
  staging: rtl8723bs: make _rtw_enqueue_cmd return 0 on success
  staging: rtl8723bs: simplify rtw_enqueue_cmd control flow
  staging: rtl8723bs: make _rtw_enqueue_cmd static
  staging: rtl8723bs: simplify _rtw_enqueue_cmd control flow
  staging: rtl8723bs: fix multiple blank lines in more hal/ files
  staging: rtl8723bs: remove unused TXDESC_64_BYTES code
  staging: rtl8723bs: remove unused DBG_XMIT_BUF and DBG_XMIT_BUF_EXT code
  staging: rtl8723bs: fix multiple blank lines in hal/Hal* files
  staging: rtl8723bs: fix multiple blank lines in hal/ files
  staging: rtl8723bs: rtw_mlme: add blank line for readability
  staging: rtl8723bs: rtw_mlme: wrap rtw_sitesurvey_cmd condition
  ...

Pull misc driver updates from Greg KH:
 "Here is the big set of char, misc, iio, fpga, and other small driver
  subsystems changes for 7.2-rc1.

  Lots of little stuff in here, the majority being of course the IIO
  driver updates, as a list they are:

   - IIO driver updates and additions

   - GPIB driver bugfixes and cleanups

   - Android binder driver updates (rust and C version)

   - counter driver updates

   - MHI driver updates

   - mei driver updates

   - w1 driver updates

   - interconnect driver updates

   - Comedi driver fixes and updates

   - some obsolete char drivers removed (applicom and dtlk)

   - hwtracing driver updates

   - other tiny driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (406 commits)
  w1: ds2482: Use named initializers for arrays of i2c_device_data
  firmware: stratix10-svc: Add support to query Arm Trusted Firmware (ATF) version
  firmware: stratix10-rsu: avoid blocking reboot_image sysfs when busy
  coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer()
  iio: adc: nxp-sar-adc: harden buffer ISR against per-channel read failure
  iio: chemical: scd30: Replace manual locking with RAII locking
  iio: light: tsl2591: remove unneeded tsl2591_compatible_als_persist_cycle()
  iio: dac: ad5686: create bus ops struct
  iio: dac: ad5686: cleanup doc header of local structs
  iio: dac: ad5686: add control_sync() for single-channel devices
  iio: dac: ad5686: add helpers to handle powerdown masks
  iio: dac: ad5686: add of_match table to the spi driver
  iio: dac: ad5686: drop enum id
  iio: dac: ad5686: remove redundant register definition
  iio: dac: ad5686: refactor include headers
  iio: adc: ad4080: fix AD4880 chip ID
  iio: light: veml3328: add support for new device
  dt-bindings: iio: light: veml6030: add veml3328
  fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
  fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
  ...

Pull media updates from Mauro Carvalho Chehab:

 - v4l2:
     - core: fix subdev sensor ownership
     - subdev: Allow accessing routes with STREAMS client capability
     - ctrls: Add validation for HEVC active reference counts and
       background detection control
     - common: Add YUV24 format info and has_alpha helper

 - vb2: Change vb2_read() and vb2_write() return types to ssize_t

 - i2c: cvs: Add driver of Intel Computer Vision Sensing Controller(CVS)

 - atmel-isc: remove deprecated driver

 - cec: Add CEC Latency Indication Protocol (LIP) support

 - imon: Add iMON VFD HID OEM v1.2 key mappings

 - AVMatrix: new HWS capture driver

 - isp4: new AMD capture driver

 - qcom:
     - iris: Add hierarchical coding, B-frame, and Long-Term Reference
       support for encoder
     - camss: Add SM6350 platform support
     - venus: Add SM6115 platform support

 - chips-media: wave5: Add support for Packed YUV422, CBP profile, and
   background detection

 - csi2rx: Add multistream support and 32 dma chans

 - Several cleanups and fixes

* tag 'media/v7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (394 commits)
  media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
  media: qcom: iris: vdec: allow GEN2 decoding into 10bit format
  media: qcom: iris: vdec: update find_format to handle 8bit and 10bit formats
  media: qcom: iris: vdec: update size and stride calculations for 10bit formats
  media: qcom: iris: gen2: add support for 10bit decoding
  media: qcom: iris: add QC10C & P010 buffer size calculations
  media: qcom: iris: add helpers for 8bit and 10bit formats
  media: qcom: iris: Fix FPS calculation and VPP FW overhead
  media: qcom: camss: vfe-340: Support for PIX client
  media: qcom: camss: vfe-340: Proper client handling
  media: qcom: camss: csid-340: Enable PIX interface routing
  media: qcom: camss: csid-340: Add port-to-interface mapping
  media: qcom: camss: csid-340: Switch to generic CSID_CFG/CTRL registers
  media: iris: Initialize HFI ops after firmware load in core init
  media: iris: drop struct iris_fmt
  media: iris: Add platform data for X1P42100
  media: iris: Add hardware power on/off ops for X1P42100
  media: iris: optimize COMV buffer allocation for VPU3x and VPU4x
  media: iris: add FPS calculation and VPP FW overhead in frequency formula
  media: qcom: iris: Simplify COMV size calculation
  ...

Pull spi updates from Mark Brown:
 "This has been quite a busy release, mainly due to the subsystem wide
  work Johan Hovold has done to modernise resource allocation for the
  subsystem on probe, the subsystem did some very clever allocation
  management pre devm which didn't quite mesh comfortably with managed
  allocations and made it far too easy to introduce error handling and
  removal bugs.

   - Cleanup and simplification of controller struct allocation, moving
     everything over to devm and making the devm APIs more robust, from
     Johan Hovold

   - Support for spi-mem devices that don't assert chip select and
     support for a secondary read command for memory mapped flashes,
     some commits for this are shared with mtd.

   - Support for SpacemiT K1"

* tag 'spi-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (118 commits)
  spi: Fix mismatched DT property access types
  spi: xilinx: use FIFO occupancy register to determine buffer size
  spi: spi-mem: Fix spi_controller_mem_ops kdoc
  spi: xilinx: let transfers timeout in case of no IRQ
  spi: dt-bindings: nuvoton,npcm750-fiu: Convert to DT schema
  spi: meson-spifc: fix runtime PM leak on remove
  spi: Use named initializers for platform_device_id arrays
  spi: rzv2h-rspi: Add suspend/resume support
  spi: dw-pci: remove redundant pci_free_irq_vectors() calls
  spi: ep93xx: fix double-free of zeropage on DMA setup failure
  spi: cadence-xspi: Revert COMPILE_TEST support
  spi: cadence-xspi: Support 32bit and 64bit slave dma interface
  spi: tegra210-quad: Allocate DMA memory for DMA engine
  spi: imx: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
  spi: fsl-lpspi: terminate the RX channel on TX prepare failure path
  spi: fsl-lpspi: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
  spi: atmel: fix DMA channel and bounce buffer leaks
  spi: omap2-mcspi: Use of_device_get_match_data()
  spi: Use named initializers for arrays of i2c_device_data
  spi: aspeed: Replace VLA parameter with flat pointer in calibration helper
  ...

Pull gpio updates from Bartosz Golaszewski:
 "There's one new driver, one legacy driver removed, a kunit test-suite
  for the GPIO core, support for new models in existing drivers and a
  slew of various changes in many places though I can't think of
  anything controversial that would stand out - it's been a relatively
  calm cycle.

  GPIO core:
   - Add an initial set of kunit test cases for the GPIO subsystem
   - Use the devres owner as the GPIO chip's parent in absence of any
     other parent
   - Fix const-correctness of GPIO chip SRCU guards
   - Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
     fwnode_gpiod_get()
   - Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
   - Use __ro_after_init where applicable

  New drivers:
   - Add driver for the GPIO controller on Waveshare DSI TOUCH panels

  Removed drivers:
   - Remove the obsolete ts5500 GPIO driver

  Driver updates:
   - Modernize gpio-timberdale: remove platform data support and use
     generic device property accessors
   - Extend test build coverage by enabling COMPILE_TEST for more GPIO
     drivers
   - Add some missing dependencies in Kconfig
   - Add support for sparse fixed direction to gpio-regmap
   - Remove dead code from gpio-nomadik
   - use BIT() in gpio-mxc
   - use bitmap_complement() in gpio-xilinx and gpio-pca953x
   - Use more appropriate printing functions where applicable
   - Use named initializers for platform_device_id and i2c_device_id
     arrays
   - Convert gpio-altera to using the generic GPIO chip helper library
   - Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
     gpio-tegra186
   - Unify the naming convention for Qualcomm in GPIO drivers
   - Fix interrupt bank mapping to GPIO chips in gpio-mt7621
   - Add support for the lines-initial-states property to gpio-74x164
   - Switch to using dynamic GPIO base in gpio-ixp4xx
   - Move the handling of an OF quirk from ASoC to gpiolib-of.c where
     other such quirks live
   - Use handle_bad_irq() in gpio-ep93xx
   - Some other minor tweaks and refactorings

  Devicetree bindings:
   - Document the Waveshare GPIO controller for DSI TOUCH panels
   - Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in
     gpio-zynq
   - Add new properties for gpio-dwapb and fairchild,74hc595
   - Fix whitespace issues
   - Sort compatibles alphabetically in gpio-zynq

  Documentation:
   - Fix kerneldoc warnings in gpio-realtek-otto

  Misc:
   - Attach software nodes representing GPIO chips to the actual struct
     device objects associated with them in some legacy platforms
     enabling real firmware node lookup instead of string matching
   - Drop unneeded dependencies on OF_GPIO from bus and staging drivers"

* tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits)
  gpio: nomadik: remove dead DB8540 code from <gpio/gpio-nomadik.h>
  gpio: mt7621: fix interrupt banks mapping on gpio chips
  bus: ts-nbus: drop unneeded dependency on OF_GPIO
  staging: media: max96712: drop unneeded dependency on OF_GPIO
  gpiolib: Replace strcpy() with memcpy()
  gpio: remove obsolete UAF FIXMEs from lookup paths
  gpio: core: fix const-correctness of gpio_chip_guard
  gpio: mxc: use BIT() macro
  gpio: realtek-otto: fix kernel-doc warnings
  gpio: max77620: Unify usage of space and comma in platform_device_id array
  gpio: Use named initializers for platform_device_id arrays
  gpio: cros-ec: Drop unused assignment of platform_device_id driver data
  ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
  ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx
  ARM: omap1: drop unused variable from omap16xx_gpio_init()
  gpio: gpiolib: use seq_puts() for plain strings
  gpio: ts5500: remove obsolete driver
  gpio: add kunit test cases for the GPIO subsystem
  kunit: provide kunit_platform_device_unregister()
  kunit: provide kunit_platform_device_register_full()
  ...

Pull staging driver fixes from Greg KH:
 "Here are two small bugfixes for a staging driver to fix a
  much-reported issue.

  The fixes are for the rtl8723bs driver and it's something that many
  scanning tools keep tripping over in convoluted ways (and seems to be
  able to be triggered by network traffic)

  These fixes have been in linux-next for many weeks with no reported
  issues, sorry for the delay in getting them to you"

* tag 'staging-7.1-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction
  staging: rtl8723bs: fix buffer over-read in rtw_update_protection

OF_GPIO is selected automatically on all OF systems. Any symbols it
controls also provide stubs and are private to GPIOLIB anyway so there's
really no reason to select it explicitly.

Link: https://patch.msgid.link/20260506082211.5624-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

Linux 7.1-rc6

While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.

This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.

Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Stepan Ionichev <sozdayvek@gmail.com>
Reviewed-by: Joshua Crofts <joshua.crofts1@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The device powers up in I2C mode. Switching to SPI mode
requires sending a sequence of SPI writes as described in
the datasheet.

During this sequence, the device may still be in I2C mode,
so SPI transactions may not be recognized and can fail.
Such errors are therefore ignored.

Add a comment to clarify this behavior.

Datasheet: https://www.analog.com/en/products/adt7316.html
Reviewed-by: Maxwell Doose <m32285159@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Hungyu Lin <dennylin0707@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>