Pull more Kbuild updates from Masahiro Yamada:

 - fix build rules in binderfs sample

 - fix build errors when Kbuild recurses to the top Makefile

 - covert '---help---' in Kconfig to 'help'

* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  treewide: replace '---help---' in Kconfig files with 'help'
  kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
  samples: binderfs: really compile this sample and fix build issues

Pull more media updates from Mauro Carvalho Chehab:

 - a set of atomisp patches. They remove several abstraction layers, and
   fixes clang and gcc warnings (that were hidden via some macros that
   were disabling 4 or 5 types of warnings there). There are also some
   important fixes and sensor auto-detection on newer BIOSes via ACPI
   _DCM tables.

 - some fixes

* tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
  media: rkvdec: Fix H264 scaling list order
  media: v4l2-ctrls: Unset correct HEVC loop filter flag
  media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
  media: v4l2-subdev.rst: correct information about v4l2 events
  media: s5p-mfc: Properly handle dma_parms for the allocated devices
  media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
  media: cedrus: Implement runtime PM
  media: cedrus: Program output format during each run
  media: atomisp: improve ACPI/DMI detection logs
  media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
  media: Revert "media: atomisp: Add some ACPI detection info"
  media: atomisp: improve sensor detection code to use _DSM table
  media: atomisp: get rid of an iomem abstraction layer
  media: atomisp: get rid of a string_support.h abstraction layer
  media: atomisp: use strscpy() instead of less secure variants
  media: atomisp: set DFS to MAX if sensor doesn't report fps
  media: atomisp: use different dfs failed messages
  media: atomisp: change the detection of ISP2401 at runtime
  media: atomisp: use macros from intel-family.h
  media: atomisp: don't set hpll_freq twice with different values
  ...

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The Rockchip Video Decoder driver is expecting that the values in a
scaling list are in zig-zag order and applies the inverse scanning process
to get the values in matrix order.

Commit 0b0393d59eb4 ("media: uapi: h264: clarify expected
scaling_list_4x4/8x8 order") clarified that the values in the scaling list
should already be in matrix order.

Fix this by removing the reordering and change to use two memcpy.

Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
[hverkuil-cisco@xs4all.nl: rkvdec_scaling_matrix -> rkvdec_h264_scaling_list]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This allows the VE clocks and PLL_VE to be disabled most of the time.
A runtime PM reference is held while streaming.

Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Previously, the output format was programmed as part of the ioctl()
handler. However, this has two problems:

  1) If there are multiple active streams with different output
     formats, the hardware will use whichever format was set last
     for both streams. Similarly, an ioctl() done in an inactive
     context will wrongly affect other active contexts.
  2) The registers are written while the device is not actively
     streaming. To enable runtime PM tied to the streaming state,
     all hardware access needs to be moved inside cedrus_device_run().

The call to cedrus_dst_format_set() is now placed just before the
codec-specific callback that programs the hardware.

Cc: <stable@vger.kernel.org>
Fixes: 50e761516f2b ("media: platform: Add Cedrus VPU decoder driver")
Suggested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Suggested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As there are several ways where the driver could possible
retrieve sensor data, make the prints clearer about what
was detected and from where.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Now that the EFI _DSM table is parsed by the driver, we don't
need a DMI match anymore for Asus Transform T101HA.

This reverts commit 0a76fd8e8d202dcaabc714850205d5d75c9b8271.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This reverts commit 0d64e9420583cbc3c4a3f949ebe38fd8f7769281.

As gmin_subdev_add() now takes the ACPI handle directly,
we can deprecate the code that were doing this inside each
I2C driver.

PS.: This also reverts commit c03496b3bd92 ("media: atomisp: add a notice about possible leak resources")

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Instead of keep hardcoding device-specific tables, read them
directly from the ACPI BIOS, if available.

This method is know to work with Asus T101HA device. the
same table is also visible on EzPad devices. So, it seems
that at least some BIOSes use this method to pass data about
ISP2401-connected sensors.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>