Pull staging/IIO fixes from Greg KH:
 "Here are a small number of staging and iio driver fixes for 4.16-rc2.

  The IIO fixes are all for reported things, and the android driver
  fixes also resolve some reported problems. The remaining fsl-mc
  Kconfig change resolves a build testing error that Arnd reported.

  All of these have been in linux-next with no reported issues"

* tag 'staging-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: buffer: check if a buffer has been set up when poll is called
  iio: adis_lib: Initialize trigger before requesting interrupt
  staging: android: ion: Zero CMA allocated memory
  staging: android: ashmem: Fix a race condition in pin ioctls
  staging: fsl-mc: fix build testing on x86
  iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefined
  staging: iio: ad5933: switch buffer mode to software
  iio: adc: stm32: fix stm32h7_adc_enable error handling
  staging: iio: adc: ad7192: fix external frequency setting
  iio: adc: aspeed: Fix error handling path

Jonathan writes:

First round of IIO fixes for the 4.16 cycle.

One nasty very old crash around polling for buffers that aren't there
- though that can only cause effects on drivers that support events
but not buffers.

* buffer / kfifo handling in the core.
  - Check there is a buffer and return 0 from poll directly if there
    isn't.  Poll doesn't make sense in this circumstances, but best to close
    the hole.
* ad5933
  - Change the marked buffer mode to a software buffer as the meaning of
    the hardware buffer label has long since changed and this uses a front
    end software buffer anyway.
* ad7192
  - Fix the fact the external clock frequency was only set when using the
    internal clock which was less than helpful.
* adis_lib
  - Initialize the trigger before requesting the interrupt.  Some newer
    parts can power up with interrupt generation enabled so ordering now
    matters.
* aspeed-adc
  - Fix an errror handling path as labels and general ordering were wrong.
* srf08
  - Fix a link error due to undefined devm_iio_triggered_buffer_setup.
* stm32-adc
  - Fix error handling unwind squence in stm32h7_adc_enable.

Since commit 204f672255c2 ("staging: android: ion: Use CMA APIs directly")
the CMA API is now used directly and therefore the allocated memory is no
longer automatically zeroed.

Explicitly zero CMA allocated memory to ensure that no data is exposed to
userspace.

Fixes: 204f672255c2 ("staging: android: ion: Use CMA APIs directly")
Signed-off-by: Liam Mark <lmark@codeaurora.org>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ashmem_pin_unpin() reads asma->file and asma->size before taking the
ashmem_mutex, so it can race with other operations that modify them.

Build-tested only.

Cc: stable@vger.kernel.org
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Selecting GENERIC_MSI_IRQ_DOMAIN on x86 causes a compile-time error in
some configurations:

drivers/base/platform-msi.c:37:19: error: field 'arg' has incomplete type

On the other architectures, we are fine, but here we should have an additional
dependency on X86_LOCAL_APIC so we can get the PCI_MSI_IRQ_DOMAIN symbol.

Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On some platforms there's an ITS available but it's not enabled
because reading or writing the registers is denied by the
firmware. In fact, reading or writing them will cause the system
to reset. We could remove the node from DT in such a case, but
it's better to skip nodes that are marked as "disabled" in DT so
that we can describe the hardware that exists and use the status
property to indicate how the firmware has configured things.

Cc: Stuart Yoder <stuyoder@gmail.com>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:

    for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
        L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
        for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
    done

with de-mangling cleanups yet to come.

NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do.  But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.

The next patch from Al will sort out the final differences, and we
should be all done.

Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more Kbuild updates from Masahiro Yamada:
 "Makefile changes:
   - enable unused-variable warning that was wrongly disabled for clang

  Kconfig changes:
   - warn about blank 'help' and fix existing instances
   - fix 'choice' behavior to not write out invisible symbols
   - fix misc weirdness

  Coccinell changes:
   - fix false positive of free after managed memory alloc detection
   - improve performance of NULL dereference detection"

* tag 'kbuild-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
  kconfig: remove const qualifier from sym_expand_string_value()
  kconfig: add xrealloc() helper
  kconfig: send error messages to stderr
  kconfig: echo stdin to stdout if either is redirected
  kconfig: remove check_stdin()
  kconfig: remove 'config*' pattern from .gitignnore
  kconfig: show '?' prompt even if no help text is available
  kconfig: do not write choice values when their dependency becomes n
  coccinelle: deref_null: avoid useless computation
  coccinelle: devm_free: reduce false positives
  kbuild: clang: disable unused variable warnings only when constant
  kconfig: Warn if help text is blank
  nios2: kconfig: Remove blank help text
  arm: vt8500: kconfig: Remove blank help text
  MIPS: kconfig: Remove blank help text
  MIPS: BCM63XX: kconfig: Remove blank help text
  lib/Kconfig.debug: Remove blank help text
  Staging: rtl8192e: kconfig: Remove blank help text
  Staging: rtl8192u: kconfig: Remove blank help text
  mmc: kconfig: Remove blank help text
  ...

Pull more power management updates from Rafael Wysocki:
 "These are mostly fixes and cleanups and removal of the no longer
  needed at32ap-cpufreq driver.

  Specifics:

   - Drop the at32ap-cpufreq driver which is useless after the removal
     of the corresponding arch (Corentin LABBE).

   - Fix a regression from the 4.14 cycle in the APM idle driver by
     making it initialize the polling state properly (Rafael Wysocki).

   - Fix a crash on failing system suspend due to a missing check in the
     cpufreq core (Bo Yan).

   - Make the intel_pstate driver initialize the hardware-managed
     P-state control (HWP) feature on CPU0 upon resume from system
     suspend if HWP had been enabled before the system was suspended
     (Chen Yu).

   - Fix up the SCPI cpufreq driver after recent changes (Sudeep Holla,
     Wei Yongjun).

   - Avoid pointer subtractions during frequency table walks in cpufreq
     (Dominik Brodowski).

   - Avoid the check for ProcFeedback in ST/CZ in the cpufreq driver for
     AMD processors and add a MODULE_ALIAS for cpufreq on ARM IMX (Akshu
     Agrawal, Nicolas Chauvet).

   - Fix the prototype of swsusp_arch_resume() on x86 (Arnd Bergmann).

   - Fix up the parsing of power domains DT data (Ulf Hansson)"

* tag 'pm-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  arm: imx: Add MODULE_ALIAS for cpufreq
  cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx()
  cpufreq: intel_pstate: Enable HWP during system resume on CPU0
  cpufreq: scpi: fix error return code in scpi_cpufreq_init()
  x86: hibernate: fix swsusp_arch_resume() prototype
  PM / domains: Fix up domain-idle-states OF parsing
  cpufreq: scpi: fix static checker warning cdev isn't an ERR_PTR
  cpufreq: remove at32ap-cpufreq
  cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ
  x86: PM: Make APM idle driver initialize polling state
  cpufreq: Skip cpufreq resume if it's not suspended

Pointer subtraction is slow and tedious. Therefore, replace all instances
where cpufreq_for_each_{valid_,}entry loops contained such substractions
with an iteration macro providing an index to the frequency_table entry.

Suggested-by: Al Viro <viro@ZenIV.linux.org.uk>
Link: http://lkml.kernel.org/r/20180120020237.GM13338@ZenIV.linux.org.uk
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>