Pull more vfs updates from Al Viro:
 "Assorted stuff from this cycle.  The big ones here are multilayer
  overlayfs from Miklos and beginning of sorting ->d_inode accesses out
  from David"

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits)
  autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
  procfs: fix race between symlink removals and traversals
  debugfs: leave freeing a symlink body until inode eviction
  Documentation/filesystems/Locking: ->get_sb() is long gone
  trylock_super(): replacement for grab_super_passive()
  fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
  Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
  VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
  SELinux: Use d_is_positive() rather than testing dentry->d_inode
  Smack: Use d_is_positive() rather than testing dentry->d_inode
  TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
  Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
  Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
  VFS: Split DCACHE_FILE_TYPE into regular and special types
  VFS: Add a fallthrough flag for marking virtual dentries
  VFS: Add a whiteout dentry type
  VFS: Introduce inode-getting helpers for layered/unioned fs environments
  Infiniband: Fix potential NULL d_inode dereference
  posix_acl: fix reference leaks in posix_acl_create
  autofs4: Wrong format for printing dentry
  ...

Pull kconfig updates from Michal Marek:
 "Yann E Morin was supposed to take over kconfig maintainership, but
  this hasn't happened.  So I'm sending a few kconfig patches that I
  collected:

   - Fix for missing va_end in kconfig
   - merge_config.sh displays used if given too few arguments
   - s/boolean/bool/ in Kconfig files for consistency, with the plan to
     only support bool in the future"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: use va_end to match corresponding va_start
  merge_config.sh: Display usage if given too few arguments
  kconfig: use bool instead of boolean for type definition attributes

Note that ll_prep_inode() in the latter does *not* modify ->d_inode;
it expects non-negative dentry, and in such cases ll_prep_inode() doesn't
modify *inode - it only uses the value.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull misc VFS updates from Al Viro:
 "This cycle a lot of stuff sits on topical branches, so I'll be sending
  more or less one pull request per branch.

  This is the first pile; more to follow in a few.  In this one are
  several misc commits from early in the cycle (before I went for
  separate branches), plus the rework of mntput/dput ordering on umount,
  switching to use of fs_pin instead of convoluted games in
  namespace_unlock()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch the IO-triggering parts of umount to fs_pin
  new fs_pin killing logics
  allow attaching fs_pin to a group not associated with some superblock
  get rid of the second argument of acct_kill()
  take count and rcu_head out of fs_pin
  dcache: let the dentry count go down to zero without taking d_lock
  pull bumping refcount into ->kill()
  kill pin_put()
  mode_t whack-a-mole: chelsio
  file->f_path.dentry is pinned down for as long as the file is open...
  get rid of lustre_dump_dentry()
  gut proc_register() a bit
  kill d_validate()
  ncpfs: get rid of d_validate() nonsense
  selinuxfs: don't open-code d_genocide()

"isil" and "isl" prefixes are used at various locations inside the kernel
to reference Intersil corporation.  This patch is part of a series fixing
those locations were "isl" is used in compatible strings to use the now
expected "isil" prefix instead (NASDAQ symbol for Intersil and most used
version).  The old compatible string is kept for backward compatibility.

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Uwe Kleine-Knig <uwe@kleine-koenig.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull staging drivers patches from Greg KH:
 "Here's the big staging driver tree update for 3.20-rc1.

  Lots of little things in here, adding up to lots of overall cleanups.
  The IIO driver updates are also in here as they cross the staging tree
  boundry a lot.  I2O has moved into staging as well, as a plan to drop
  it from the tree eventually as that's a dead subsystem.

  All of this has been in linux-next with no reported issues for a
  while"

* tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (740 commits)
  staging: lustre: lustre: libcfs: define symbols as static
  staging: rtl8712: Do coding style cleanup
  staging: lustre: make obd_updatemax_lock static
  staging: rtl8188eu: core: switch with redundant cases
  staging: rtl8188eu: odm: conditional setting with no effect
  staging: rtl8188eu: odm: condition with no effect
  staging: ft1000: fix braces warning
  staging: sm7xxfb: fix remaining CamelCase
  staging: sm7xxfb: fix CamelCase
  staging: rtl8723au: multiple condition with no effect - if identical to else
  staging: sm7xxfb: make smtc_scr_info static
  staging/lustre/mdc: Initialize req in mdc_enqueue for !it case
  staging/lustre/clio: Do not allow group locks with gid 0
  staging/lustre/llite: don't add to page cache upon failure
  staging/lustre/llite: Add exception entry check after radix_tree
  staging/lustre/libcfs: protect kkuc_groups from write access
  staging/lustre/fld: refer to MDT0 for fld lookup in some cases
  staging/lustre/llite: Solve a race to access lli_has_smd in read case
  staging/lustre/ptlrpc: hold rq_lock when modify rq_flags
  staging/lustre/lnet: portal spreading rotor should be unsigned
  ...

Pull USB patches from Greg KH:
 "Here's the big pull request for the USB driver tree for 3.20-rc1.

  Nothing major happening here, just lots of gadget driver updates, new
  device ids, and a bunch of cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits)
  usb: musb: fix device hotplug behind hub
  usb: dwc2: Fix a bug in reading the endpoint directions from reg.
  staging: emxx_udc: fix the build error
  usb: Retry port status check on resume to work around RH bugs
  Revert "usb: Reset USB-3 devices on USB-3 link bounce"
  uhci-hub: use HUB_CHAR_*
  usb: kconfig: replace PPC_OF with PPC
  ehci-pci: disable for Intel MID platforms (update)
  usb: gadget: Kconfig: use bool instead of boolean
  usb: musb: blackfin: remove incorrect __exit_p()
  USB: fix use-after-free bug in usb_hcd_unlink_urb()
  ehci-pci: disable for Intel MID platforms
  usb: host: pci_quirks: joing string literals
  USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd)
  USB: usbfs: allow URBs to be reaped after disconnection
  cdc-acm: kill unnecessary messages
  cdc-acm: add sanity checks
  usb: phy: phy-generic: Fix USB PHY gpio reset
  usb: dwc2: fix USB core dependencies
  usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel()
  ...

Pull backing device changes from Jens Axboe:
 "This contains a cleanup of how the backing device is handled, in
  preparation for a rework of the life time rules.  In this part, the
  most important change is to split the unrelated nommu mmap flags from
  it, but also removing a backing_dev_info pointer from the
  address_space (and inode), and a cleanup of other various minor bits.

  Christoph did all the work here, I just fixed an oops with pages that
  have a swap backing.  Arnd fixed a missing export, and Oleg killed the
  lustre backing_dev_info from staging.  Last patch was from Al,
  unexporting parts that are now no longer needed outside"

* 'for-3.20/bdi' of git://git.kernel.dk/linux-block:
  Make super_blocks and sb_lock static
  mtd: export new mtd_mmap_capabilities
  fs: make inode_to_bdi() handle NULL inode
  staging/lustre/llite: get rid of backing_dev_info
  fs: remove default_backing_dev_info
  fs: don't reassign dirty inodes to default_backing_dev_info
  nfs: don't call bdi_unregister
  ceph: remove call to bdi_unregister
  fs: remove mapping->backing_dev_info
  fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info
  nilfs2: set up s_bdi like the generic mount_bdev code
  block_dev: get bdev inode bdi directly from the block device
  block_dev: only write bdev inode on close
  fs: introduce f_op->mmap_capabilities for nommu mmap support
  fs: kill BDI_CAP_SWAP_BACKED
  fs: deduplicate noop_backing_dev_info

This patchset addresses a race which was described in the changelog for
5695be142e20 ("OOM, PM: OOM killed task shouldn't escape PM suspend"):

: PM freezer relies on having all tasks frozen by the time devices are
: getting frozen so that no task will touch them while they are getting
: frozen.  But OOM killer is allowed to kill an already frozen task in order
: to handle OOM situtation.  In order to protect from late wake ups OOM
: killer is disabled after all tasks are frozen.  This, however, still keeps
: a window open when a killed task didn't manage to die by the time
: freeze_processes finishes.

The original patch hasn't closed the race window completely because that
would require a more complex solution as it can be seen by this patchset.

The primary motivation was to close the race condition between OOM killer
and PM freezer _completely_.  As Tejun pointed out, even though the race
condition is unlikely the harder it would be to debug weird bugs deep in
the PM freezer when the debugging options are reduced considerably.  I can
only speculate what might happen when a task is still runnable
unexpectedly.

On a plus side and as a side effect the oom enable/disable has a better
(full barrier) semantic without polluting hot paths.

I have tested the series in KVM with 100M RAM:
- many small tasks (20M anon mmap) which are triggering OOM continually
- s2ram which resumes automatically is triggered in a loop
	echo processors > /sys/power/pm_test
	while true
	do
		echo mem > /sys/power/state
		sleep 1s
	done
- simple module which allocates and frees 20M in 8K chunks. If it sees
  freezing(current) then it tries another round of allocation before calling
  try_to_freeze
- debugging messages of PM stages and OOM killer enable/disable/fail added
  and unmark_oom_victim is delayed by 1s after it clears TIF_MEMDIE and before
  it wakes up waiters.
- rebased on top of the current mmotm which means some necessary updates
  in mm/oom_kill.c. mark_tsk_oom_victim is now called under task_lock but
  I think this should be OK because __thaw_task shouldn't interfere with any
  locking down wake_up_process. Oleg?

As expected there are no OOM killed tasks after oom is disabled and
allocations requested by the kernel thread are failing after all the tasks
are frozen and OOM disabled.  I wasn't able to catch a race where
oom_killer_disable would really have to wait but I kinda expected the race
is really unlikely.

[  242.609330] Killed process 2992 (mem_eater) total-vm:24412kB, anon-rss:2164kB, file-rss:4kB
[  243.628071] Unmarking 2992 OOM victim. oom_victims: 1
[  243.636072] (elapsed 2.837 seconds) done.
[  243.641985] Trying to disable OOM killer
[  243.643032] Waiting for concurent OOM victims
[  243.644342] OOM killer disabled
[  243.645447] Freezing remaining freezable tasks ... (elapsed 0.005 seconds) done.
[  243.652983] Suspending console(s) (use no_console_suspend to debug)
[  243.903299] kmem_eater: page allocation failure: order:1, mode:0x204010
[...]
[  243.992600] PM: suspend of devices complete after 336.667 msecs
[  243.993264] PM: late suspend of devices complete after 0.660 msecs
[  243.994713] PM: noirq suspend of devices complete after 1.446 msecs
[  243.994717] ACPI: Preparing to enter system sleep state S3
[  243.994795] PM: Saving platform NVS memory
[  243.994796] Disabling non-boot CPUs ...

The first 2 patches are simple cleanups for OOM.  They should go in
regardless the rest IMO.

Patches 3 and 4 are trivial printk -> pr_info conversion and they should
go in ditto.

The main patch is the last one and I would appreciate acks from Tejun and
Rafael.  I think the OOM part should be OK (except for __thaw_task vs.
task_lock where a look from Oleg would appreciated) but I am not so sure I
haven't screwed anything in the freezer code.  I have found several
surprises there.

This patch (of 5):

This patch is just a preparatory and it doesn't introduce any functional
change.

Note:
I am utterly unhappy about lowmemory killer abusing TIF_MEMDIE just to
wait for the oom victim and to prevent from new killing. This is
just a side effect of the flag. The primary meaning is to give the oom
victim access to the memory reserves and that shouldn't be necessary
here.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sound updates from Takashi Iwai:
 "In this batch, you can find lots of cleanups through the whole
  subsystem, as our good New Year's resolution.  Lots of LOCs and
  commits are about LINE6 driver that was promoted finally from staging
  tree, and as usual, there've been widely spread ASoC changes.

  Here some highlights:

  ALSA core changes
   - Embedding struct device into ALSA core structures
   - sequencer core cleanups / fixes
   - PCM msbits constraints cleanups / fixes
   - New SNDRV_PCM_TRIGGER_DRAIN command
   - PCM kerneldoc fixes, header cleanups
   - PCM code cleanups using more standard codes
   - Control notification ID fixes

  Driver cleanups
   - Cleanups of PCI PM callbacks
   - Timer helper usages cleanups
   - Simplification (e.g. argument reduction) of many driver codes

  HD-audio
   - Hotkey and LED support on HP laptops with Realtek codecs
   - Dock station support on HP laptops
   - Toshiba Satellite S50D fixup
   - Enhanced wallclock timestamp handling for HD-audio
   - Componentization to simplify the linkage between i915 and hd-audio
     drivers for Intel HDMI/DP

  USB-audio
   - Akai MPC Element support
   - Enhanced timestamp handling

  ASoC
   - Lots of refactoringin ASoC core, moving drivers to more data driven
     initialization and rationalizing a lot of DAPM usage
   - Much improved handling of CDCLK clocks on Samsung I2S controllers
   - Lots of driver specific cleanups and feature improvements
   - CODEC support for TI PCM514x and TLV320AIC3104 devices
   - Board support for Tegra systems with Realtek RT5677
   - New driver for Maxim max98357a
   - More enhancements / fixes for Intel SST driver

  Others
   - Promotion of LINE6 driver from staging along with lots of rewrites
     and cleanups
   - DT support for old non-ASoC atmel driver
   - oxygen cleanups, XIO2001 init, Studio Evolution SE6x support
   - Emu8000 DRAM size detection fix on ISA(!!) AWE64 boards
   - A few more ak411x fixes for ice1724 boards"

* tag 'sound-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (542 commits)
  ALSA: line6: toneport: Use explicit type for firmware version
  ALSA: line6: Use explicit type for serial number
  ALSA: line6: Return EIO if read/write not successful
  ALSA: line6: Return error if device not responding
  ALSA: line6: Add delay before reading status
  ASoC: Intel: Clean data after SST fw fetch
  ALSA: hda - Add docking station support for another HP machine
  ALSA: control: fix failure to return new numerical ID in 'replace' event data
  ALSA: usb: update trigger timestamp on first non-zero URB submitted
  ALSA: hda: read trigger_timestamp immediately after starting DMA
  ALSA: pcm: allow for trigger_tstamp snapshot in .trigger
  ALSA: pcm: don't override timestamp unconditionally
  ALSA: off by one bug in snd_riptide_joystick_probe()
  ASoC: rt5670: Set use_single_rw flag for regmap
  ASoC: rt286: Add rt288 codec support
  ASoC: max98357a: Fix build in !CONFIG_OF case
  ASoC: Intel: fix platform_no_drv_owner.cocci warnings
  ARM: dts: Switch Odroid X2/U2 to simple-audio-card
  ARM: dts: Exynos4 and Odroid X2/U3 sound device nodes update
  ALSA: control: fix failure to return numerical ID in 'add' event
  ...