Pull USB fixes from Greg KH:
 "Here are a bunch of fixes for the USB drivers for 3.17-rc3.

  Also in here is the movement of the usbip driver out of staging, into
  the "real" part of the kernel, it had to wait until after -rc1 to
  handle the merge issues involved between the USB and staging trees.
  The code is identical, just file movements there.

  The USB fixes are all over the place, new device ids, xhci fixes for
  reported issues and the usual gadget driver fixes as well.  All have
  been in linux-next for a while now"

* tag 'usb-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (46 commits)
  USB: fix build error with CONFIG_PM_RUNTIME disabled
  Revert "usb: ehci/ohci-exynos: Fix PHY getting sequence"
  xhci: Disable streams on Via XHCI with device-id 0x3432
  USB: serial: fix potential heap buffer overflow
  USB: serial: fix potential stack buffer overflow
  usb: ehci/ohci-exynos: Fix PHY getting sequence
  usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1
  USB: sisusb: add device id for Magic Control USB video
  usb: dwc2: gadget: Set the default EP max packet value as 8 bytes
  usb: ehci: using wIndex + 1 for hub port
  USB: storage: add quirk for Newer Technology uSCSI SCSI-USB converter
  MAINTAINERS: Add an entry for USB/IP driver
  usbip: remove struct usb_device_id table
  usbip: move usbip kernel code out of staging
  usbip: move usbip userspace code out of staging
  USB: whiteheat: Added bounds checking for bulk command response
  usb: gadget: remove $(PWD) in ccflags-y
  usb: pch_udc: usb gadget device support for Intel Quark X1000
  usb: gadget: uvc: fix possible lockup in uvc gadget
  usb: wusbcore: fix below build warning
  ...

The Elecom WDC-150SU2M uses this chip.

Reported-by: Hiroki Kondo <kompiro@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The stick is not recognized.
This dongle uses r8188eu but usb-id is missing.
3.16.0

Signed-off-by: Holger Paradies <retabell@gmx.de>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At this point, USB/IP kernel code is fully functional
and can be moved out of staging.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

At this point, USB/IP userspace code is fully functional
and can be moved out of staging.

Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Memory allocated by kstrdup should be freed.

CC: Brian Swetland <swetland@google.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Seunghun Lee <waydi1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added a guaranteed null-terminate after call to strncpy.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix two reported bugs, caused by et131x_adapter->phydev->addr being accessed
before it is initialised, by:

- letting et131x_mii_write() take a phydev address, instead of using the one
  stored in adapter by default. This is so et131x_mdio_write() can use it's own
  addr value.
- removing implementation of et131x_mdio_reset(), as it's not needed.
- moving a call to et131x_disable_phy_coma() in et131x_pci_setup(), which uses
  phydev->addr, until after the mdiobus has been registered.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=80751
Link: https://bugzilla.kernel.org/show_bug.cgi?id=77121
Cc: stable@vger.kernel.org
Signed-off-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The following patch fixes a build error on sparc32. I think it should go to
stable 3.16.

Remove a circular dependency on atomic.h header file which leads to compilation
failure on sparc32 as reported here:
http://kisskb.ellerman.id.au/kisskb/buildresult/11340509/

The specific dependency is as follows:

In file included from arch/sparc/include/asm/smp_32.h:24:0,
                 from arch/sparc/include/asm/smp.h:6,
                 from arch/sparc/include/asm/switch_to_32.h:4,
                 from arch/sparc/include/asm/switch_to.h:6,
                 from arch/sparc/include/asm/ptrace.h:84,
                 from arch/sparc/include/asm/processor_32.h:16,
                 from arch/sparc/include/asm/processor.h:6,
                 from arch/sparc/include/asm/barrier_32.h:4,
                 from arch/sparc/include/asm/barrier.h:6,
                 from arch/sparc/include/asm/atomic_32.h:17,
                 from arch/sparc/include/asm/atomic.h:6,
                 from drivers/staging/lustre/lustre/obdclass/class_obd.c:38

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge more incoming from Andrew Morton:
 "Two new syscalls:

     memfd_create in "shm: add memfd_create() syscall"
     kexec_file_load in "kexec: implementation of new syscall kexec_file_load"

  And:

   - Most (all?) of the rest of MM

   - Lots of the usual misc bits

   - fs/autofs4

   - drivers/rtc

   - fs/nilfs

   - procfs

   - fork.c, exec.c

   - more in lib/

   - rapidio

   - Janitorial work in filesystems: fs/ufs, fs/reiserfs, fs/adfs,
     fs/cramfs, fs/romfs, fs/qnx6.

   - initrd/initramfs work

   - "file sealing" and the memfd_create() syscall, in tmpfs

   - add pci_zalloc_consistent, use it in lots of places

   - MAINTAINERS maintenance

   - kexec feature work"

* emailed patches from Andrew Morton <akpm@linux-foundation.org: (193 commits)
  MAINTAINERS: update nomadik patterns
  MAINTAINERS: update usb/gadget patterns
  MAINTAINERS: update DMA BUFFER SHARING patterns
  kexec: verify the signature of signed PE bzImage
  kexec: support kexec/kdump on EFI systems
  kexec: support for kexec on panic using new system call
  kexec-bzImage64: support for loading bzImage using 64bit entry
  kexec: load and relocate purgatory at kernel load time
  purgatory: core purgatory functionality
  purgatory/sha256: provide implementation of sha256 in purgaotory context
  kexec: implementation of new syscall kexec_file_load
  kexec: new syscall kexec_file_load() declaration
  kexec: make kexec_segment user buffer pointer a union
  resource: provide new functions to walk through resources
  kexec: use common function for kimage_normal_alloc() and kimage_crash_alloc()
  kexec: move segment verification code in a separate function
  kexec: rename unusebale_pages to unusable_pages
  kernel: build bin2c based on config option CONFIG_BUILD_BIN2C
  bin2c: move bin2c in scripts/basic
  shm: wait for pins to be released when sealing
  ...