linux.git/drivers/staging/wfx/queue.h, branch v5.17

staging: wfx: remove useless comments after #endif

2021-09-14T07:16:33+00:00

Comments after the last #endif of header files don't bring any
information and are redundant with the name of the file. Drop them.

Signed-off-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/20210913130203.1903622-30-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman

staging: wfx: avoid c99 comments

2021-09-14T07:16:33+00:00

The wfx driver is a network driver. C99 comments are prohibited in this
part of the kernel.

Signed-off-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/20210913130203.1903622-28-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman

staging: wfx: update files descriptions

2021-09-14T07:16:33+00:00

Each file of the driver contains a short description of its purpose.
These description were a bit outdated.

Signed-off-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/20210913130203.1903622-26-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman

Revert "staging: wfx: remove unused included header files"

2021-03-10T08:23:30+00:00

This reverts commit 314fd52f01ead9528a5cda5a868425bb736d93a2.

It turns .h files into non-stand-alone when building, which might cause
problems in the long-run.

Reported-by: Jérôme Pouiller 
Cc: Muhammad Usama Anjum 
Signed-off-by: Greg Kroah-Hartman

staging: wfx: remove unused included header files

2021-02-12T08:53:57+00:00

Many header files have been included, but never used. Those header
files have been removed.

Signed-off-by: Muhammad Usama Anjum 
Link: https://lore.kernel.org/r/20210211143637.GA177425@LEGION
Signed-off-by: Greg Kroah-Hartman

staging: wfx: update copyrights dates

2020-10-07T10:55:47+00:00

Most of the files have been modified in 2020, so update the copyright
notices.

Signed-off-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/20201007101943.749898-6-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman

staging: wfx: fix QoS priority for slow buses

2020-10-07T10:55:47+00:00

The device is in charge of respecting the QoS constraints. The driver
have to ensure that all the queues contain data and the device choose
the right queue to send.

The things starts to be more difficult when the bandwidth of the bus is
lower than the bandwidth of the WiFi. The device quickly sends the
frames of the highest priority queue. Then, it starts to send frames
from a lower priority queue. Though, there are still some high priority
frames waiting in the driver.

To work around this problem, this patch add some priorities to each
queue. The weigh of the queue was (roughly) calculated experimentally by
checking the speed ratio of each queue when the bus does not limit the
traffic:
    - Be/Bk -> 20Mbps/10Mbps
    - Vi/Be -> 36Mbps/180Kbps
    - Vo/Be -> 35Mbps/600Kbps
    - Vi/Vo -> 24Mbps/12Mbps

So, if we fix the weigh of the Background to 1, the weight of Best
Effort should be 2. The weight of Video should be 116. However, since
there is only 32 queues, it make no sense to use a value greater than
64[1]. And finally, the weight of the Voice is set to 128.

[1] Because of this approximation, with very slow bus, we can still
observe frame starvation when we measure the speed ratio of Vi/Be. It is
around 35Mbps/1Mbps (instead of 36Mbps/180Kbps). However, it is still in
accepted error range.

Signed-off-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/20201007101943.749898-5-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman

staging: wfx: correctly retrieve vif ID from Tx confirmation

2020-07-03T08:33:07+00:00

The device is able to send multiple Tx confirmations in the one reply.
In this case, there is only one vif identifier for all the
confirmations.

Unfortunately, to generate this kind of messages the device squashes all
the confirmations whatever their vif ID and use the vif ID of the first
confirmation. So, the driver cannot rely on the vif ID mentioned in the
header. Fortunately, using the packet_id, the driver can retrieve the Tx
request and the associated vif.

Signed-off-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/20200701150707.222985-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman

staging: wfx: associate tx_queues to vifs

2020-07-03T08:33:06+00:00

The device handles 4 queues (one per AC) for each virtual interface (and
maximum 4 virtual interfaces). Until now the driver unified the queue of
all interfaces and handled only 4 queues for whole device.

This architecture did not allow to balance the traffic between the vif. So,
this patch relocate the queues into the vif and change the API accordingly.

Signed-off-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/20200701150707.222985-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman

staging: wfx: drop unused function wfx_pending_requeue()

2020-05-27T08:18:08+00:00

The function wfx_pending_requeue() is not used anymore since the
commit 7a44644c9379e ("staging: wfx: introduce
wfx_set_default_unicast_key()")

Fixes: 7a44644c9379e ("staging: wfx: introduce wfx_set_default_unicast_key()")
Signed-off-by: Jérôme Pouiller 
Link: https://lore.kernel.org/r/20200526171821.934581-4-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman