Pull drm updates from Dave Airlie:
 "This seems to have been a comparatively quieter merge window, I assume
  due to holidays etc. The "biggest" change is AMD header cleanups, which
  merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
  with the etnaviv driver wanting to reuse the code, hopefully other drivers
  can go in the same direction.

  Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
  elsewhere.

  Core:
   - Add .last_close and .output_poll_changed helpers to reduce driver footprints
   - Fix plane clipping
   - Improved debug printing support
   - Add panel orientation property
   - Update edid derived properties at edid setting
   - Reduction in fbdev driver footprint
   - Move amdgpu scheduler into core for other drivers to use.

  i915:
   - Selftest and IGT improvements
   - Fast boot prep work on IPS, pipe config
   - HW workarounds for Cannonlake, Geminilake
   - Cannonlake clock and HDMI2.0 fixes
   - GPU cache invalidation and context switch improvements
   - Display planes cleanup
   - New PMU interface for perf queries
   - New firmware support for KBL/SKL
   - Geminilake HW workaround for perforamce
   - Coffeelake stolen memory improvements
   - GPU reset robustness work
   - Cannonlake horizontal plane flipping
   - GVT work

  amdgpu/radeon:
   - RV and Vega header file cleanups (lots of lines gone!)
   - TTM operation context support
   - 48-bit GPUVM support for Vega/RV
   - ECC support for Vega
   - Resizeable BAR support
   - Multi-display sync support
   - Enable swapout for reserved BOs during allocation
   - S3 fixes on Raven
   - GPU reset cleanup and fixes
   - 2+1 level GPU page table

  amdkfd:
   - GFX7/8 SDMA user queues support
   - Hardware scheduling for multiple processes
   - dGPU prep work

  rcar:
   - Added R8A7743/5 support
   - System suspend/resume support

  sun4i:
   - Multi-plane support for YUV formats
   - A83T and LVDS support

  msm:
   - Devfreq support for GPU

  tegra:
   - Prep work for adding Tegra186 support
   - Tegra186 HDMI support
   - HDMI2.0 and zpos support by using generic helpers

  tilcdc:
   - Misc fixes

  omapdrm:
   - Support memory bandwidth limits
   - DSI command mode panel cleanups
   - DMM error handling

  exynos:
   - drop the old IPP subdriver.

  etnaviv:
   - Occlusion query fixes
   - Job handling fixes
   - Prep work for hooking in gpu scheduler

  armada:
   - Move closer to atomic modesetting
   - Allow disabling primary plane if overlay is full screen

  imx:
   - Format modifier support
   - Add tile prefetch to PRE
   - Runtime PM support for PRG

  ast:
   - fix LUT loading"

* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
  drm/ast: Load lut in crtc_commit
  drm: Check for lessee in DROP_MASTER ioctl
  drm: fix gpu scheduler link order
  drm/amd/display: Demote error print to debug print when ATOM impl missing
  dma-buf: fix reservation_object_wait_timeout_rcu once more v2
  drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
  drm/amd/amdgpu: Add Polaris version check
  drm/amdgpu: Reenable manual GPU reset from sysfs
  drm/amdgpu: disable MMHUB power gating on raven
  drm/ttm: Don't unreserve swapped BOs that were previously reserved
  drm/ttm: Don't add swapped BOs to swap-LRU list
  drm/amdgpu: only check for ECC on Vega10
  drm/amd/powerplay: Fix smu_table_entry.handle type
  drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
  drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
  drm/radeon: fill in rb backend map on evergreen/ni.
  drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
  drm/ttm: only free pages rather than update global memory count together
  drm/amdgpu: fix CPU based VM updates
  drm/amdgpu: fix typo in amdgpu_vce_validate_bo
  ...

The default interface situation has been taken into the framework, so
remove the default set of each module.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Sparse emitted the following warning:
../drivers/staging/vboxvideo/vbox_fb.c:173:27: warning: incorrect type in assignment (different address spaces)
../drivers/staging/vboxvideo/vbox_fb.c:173:27:    expected char [noderef] <asn:2>*screen_base
../drivers/staging/vboxvideo/vbox_fb.c:173:27:    got void *virtual

The vbox_bo buffer object kernel mapping is handled by a call
to ttm_bo_kmap() prior to the assignment of bo->kmap.virtual to
info->screen_base of type char __iomem*.
Casting bo->kmap.virtual to char __iomem* in this assignment fixes
the warning.

vboxvideo: Fix address space of expression removal sparse warning

Sparse emitted the following warning:
../drivers/staging/vboxvideo/vbox_main.c:64:25: warning: cast removes address space of expression

vbox->vbva_buffers iomapping is handled by calling vbox_accel_init()
from vbox_hw_init().
__force attribute is used in assignment to vbva to fix the warning.

Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

forward the operation context to ttm_tt_populate as well,
and the ultimate goal is swapout enablement for reserved BOs.

v2: squash in fix for vboxvideo

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes interface changes done in the following commits:
drm/ttm: add operation ctx to ttm_bo_validate v2
drm/ttm: add context to driver move callback as well

I missed this driver because it is in the staging area.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.15.

  Core:
   - Atomic object lifetime fixes
   - Atomic iterator improvements
   - Sparse/smatch fixes
   - Legacy kms ioctls to be interruptible
   - EDID override improvements
   - fb/gem helper cleanups
   - Simple outreachy patches
   - Documentation improvements
   - Fix dma-buf rcu races
   - DRM mode object leasing for improving VR use cases.
   - vgaarb improvements for non-x86 platforms.

  New driver:
   - tve200: Faraday Technology TVE200 block.

     This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
     the StorLink SL3516 (later Cortina Systems CS3516) as well as the
     Grain Media GM8180.

  New bridges:
   - SiI9234 support

  New panels:
   - S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
     LT089AC19000, Innolux AT043TN24

  i915:
   - Remove Coffeelake from alpha support
   - Cannonlake workarounds
   - Infoframe refactoring for DisplayPort
   - VBT updates
   - DisplayPort vswing/emph/buffer translation refactoring
   - CCS fixes
   - Restore GPU clock boost on missed vblanks
   - Scatter list updates for userptr allocations
   - Gen9+ transition watermarks
   - Display IPC (Isochronous Priority Control)
   - Private PAT management
   - GVT: improved error handling and pci config sanitizing
   - Execlist refactoring
   - Transparent Huge Page support
   - User defined priorities support
   - HuC/GuC firmware refactoring
   - DP MST fixes
   - eDP power sequencing fixes
   - Use RCU instead of stop_machine
   - PSR state tracking support
   - Eviction fixes
   - BDW DP aux channel timeout fixes
   - LSPCON fixes
   - Cannonlake PLL fixes

  amdgpu:
   - Per VM BO support
   - Powerplay cleanups
   - CI powerplay support
   - PASID mgr for kfd
   - SR-IOV fixes
   - initial GPU reset for vega10
   - Prime mmap support
   - TTM updates
   - Clock query interface for Raven
   - Fence to handle ioctl
   - UVD encode ring support on Polaris
   - Transparent huge page DMA support
   - Compute LRU pipe tweaks
   - BO flag to allow buffers to opt out of implicit sync
   - CTX priority setting API
   - VRAM lost infrastructure plumbing

  qxl:
   - fix flicker since atomic rework

  amdkfd:
   - Further improvements from internal AMD tree
   - Usermode events
   - Drop radeon support

  nouveau:
   - Pascal temperature sensor support
   - Improved BAR2 handling
   - MMU rework to support Pascal MMU

  exynos:
   - Improved HDMI/mixer support
   - HDMI audio interface support

  tegra:
   - Prep work for tegra186
   - Cleanup/fixes

  msm:
   - Preemption support for a5xx
   - Display fixes for 8x96 (snapdragon 820)
   - Async cursor plane fixes
   - FW loading rework
   - GPU debugging improvements

  vc4:
   - Prep for DSI panels
   - fix T-format tiling scanout
   - New madvise ioctl

  Rockchip:
   - LVDS support

  omapdrm:
   - omap4 HDMI CEC support

  etnaviv:
   - GPU performance counters groundwork

  sun4i:
   - refactor driver load + TCON backend
   - HDMI improvements
   - A31 support
   - Misc fixes

  udl:
   - Probe/EDID read fixes.

  tilcdc:
   - Misc fixes.

  pl111:
   - Support more variants

  adv7511:
   - Improve EDID handling.
   - HDMI CEC support

  sii8620:
   - Add remote control support"

* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
  drm/rockchip: analogix_dp: Use mutex rather than spinlock
  drm/mode_object: fix documentation for object lookups.
  drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
  drm/i915: Move init_clock_gating() back to where it was
  drm/i915: Prune the reservation shared fence array
  drm/i915: Idle the GPU before shinking everything
  drm/i915: Lock llist_del_first() vs llist_del_all()
  drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
  drm/i915: Disable lazy PPGTT page table optimization for vGPU
  drm/i915/execlists: Remove the priority "optimisation"
  drm/i915: Filter out spurious execlists context-switch interrupts
  drm/amdgpu: use irq-safe lock for kiq->ring_lock
  drm/amdgpu: bypass lru touch for KIQ ring submission
  drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
  drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
  drm/amd/powerplay: initialize a variable before using it
  drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
  drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
  drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
  drm/rockchip: add CONFIG_OF dependency for lvds
  ...

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The x and y hints receives from the host are unsigned 32 bit integers and
they get set to -1 (0xffffffff) when invalid. Before this commit the
vboxvideo driver was storing them in an u16 causing the -1 to be truncated
to 65535 which, once reported to userspace, was breaking gnome 3.26+
in Wayland mode.

This commit stores the host values in 32 bit variables, removing the
truncation and checks for -1, replacing it with 0 as -1 is not a valid
suggested-offset-property value. Likewise the properties are now
initialized to 0 instead of -1, since -1 is not a valid value.
This fixes gnome 3.26+ in Wayland mode not working with the vboxvideo
driver.

Reported-by: Gianfranco Costamagna <locutusofborg@debian.org>
Cc: stable@vger.kernel.org
Cc: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This will allow __drm_mode_object_file to be extended to perform
access control checks based on the file in use.

v2: Also fix up vboxvideo driver in staging

[airlied: merging early as this is an API change]

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>