Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver updates for 6.7-rc1. A bit
  bigger than 6.6 this time around, as it coincided with the Outreachy
  and mentorship application process, so we got a bunch of new
  developers sending in their first changes, which is nice to see.

  Also in here is a removal of the qlge ethernet driver, and the
  rtl8192u wireless driver. Both of these were very old and no one was
  maintaining them, the wireless driver removal was due to no one using
  it anymore, and no hardware to be found, and is part of a larger
  effort to remove unused and old wifi drivers from the system.

  The qlge ethernet driver did have one user pop up after it was
  dropped, and we are working with the network mainainers to figure out
  what tree it will come back in from and who will be responsible for
  it, and if it really is being used or not. Odds are it will show up in
  a network subsystem pull request after -rc1 is out, but we aren't sure
  yet.

  Other smaller changes in here are:

   - Lots of vc04_services work by Umang to clean up the mess created by
     the rpi developers long ago, bringing it almost into good enough
     shape to get out of staging, hopefully next major release, it's
     getting close.

   - rtl8192e variable cleanups and removal of unused code and
     structures

   - vme_user coding style cleanups

   - other small coding style cleanups to lots of the staging drivers

   - octeon typedef removals, and then last-minute revert when it was
     found to break the build in some configurations (it's a hard driver
     to build properly, none of the normal automated testing catches
     it.)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
  Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
  Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
  Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
  Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
  Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
  Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
  staging: vt6655: Type encoding info dropped from variable name "byRxRate"
  staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
  staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
  staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
  staging: vt6655: Type encoding info dropped from variable name "byPacketType"
  staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
  staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
  staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
  staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
  staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
  staging: fbtft: Convert to platform remove callback returning void
  staging: olpc_dcon: Remove I2C_CLASS_DDC support
  staging: vc04_services: use snprintf instead of sprintf
  staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
  ...

Kalle Valo says:

====================
wireless-next patches for v6.7

The first pull request for v6.7, with both stack and driver changes.
We have a big change how locking is handled in cfg80211 and mac80211
which removes several locks and hopefully simplifies the locking
overall. In drivers rtw89 got MCC support and smaller features to
other active drivers but nothing out of ordinary.

Major changes:

cfg80211
 - remove wdev mutex, use the wiphy mutex instead
 - annotate iftype_data pointer with sparse
 - first kunit tests, for element defrag
 - remove unused scan_width support

mac80211
 - major locking rework, remove several locks like sta_mtx, key_mtx
   etc. and use the wiphy mutex instead
 - remove unused shifted rate support
 - support antenna control in frame injection (requires driver support)
 - convert RX_DROP_UNUSABLE to more detailed reason codes

rtw89
 - TDMA-based multi-channel concurrency (MCC) support

iwlwifi
 - support set_antenna() operation
 - support frame injection antenna control

ath12k
 - WCN7850: enable 320 MHz channels in 6 GHz band
 - WCN7850: hardware rfkill support
 - WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster

ath11k
 - add chip id board name while searching board-2.bin

* tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits)
  wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo()
  wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips
  wifi: rtw89: debug: show txpwr table according to chip gen
  wifi: rtw89: phy: set TX power RU limit according to chip gen
  wifi: rtw89: phy: set TX power limit according to chip gen
  wifi: rtw89: phy: set TX power offset according to chip gen
  wifi: rtw89: phy: set TX power by rate according to chip gen
  wifi: rtw89: mac: get TX power control register according to chip gen
  wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp
  wifi: rtlwifi: fix EDCA limit set by BT coexistence
  wifi: rt2x00: fix MT7620 low RSSI issue
  wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance
  wifi: rtw89: refine uplink trigger based control mechanism
  wifi: rtw89: 8851b: update TX power tables to R34
  wifi: rtw89: 8852b: update TX power tables to R35
  wifi: rtw89: 8852c: update TX power tables to R67
  wifi: rtw89: regd: configure Thailand in regulation type
  wifi: mac80211: add back SPDX identifier
  wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value
  wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines
  ...

====================

Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

They are appear to be spelling mistakes,
Initially identified in a codespell report and never been addressed so far.

./rtl8723b_phycfg.c:156: Threre ==> There, three
./rtl8723b_phycfg.c:283: Condig ==> Config
./rtl8723b_phycfg.c:328: Tranceiver ==> Transceiver

Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Link: https://lore.kernel.org/r/20230917134940.2746-1-bragathemanick0908@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using the full struct cfg80211_ap_settings for an update is
misleading, since most settings cannot be updated. Split the
update case off into a new struct cfg80211_ap_update.

Change-Id: I3ba4dd9280938ab41252f145227a7005edf327e4
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Modify the prototype for change_beacon() in struct cfg80211_op to
accept cfg80211_ap_settings instead of cfg80211_beacon_data so that
it can process data in addition to beacons.
Modify the prototypes of ieee80211_change_beacon() and driver specific
functions accordingly.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-4-quic_alokad@quicinc.com
[while at it, remove pointless "if (info)" check in tracing that just
 makes all the lines longer than they need be - it's never NULL]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Use is_multicast_ether_addr() and is_broadcast_ether_addr()
instead of custom macro IS_MCAST() and MacAddr_isBcst(), the buffer
is properly aligned.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230814105623.292541-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use is_broadcast_ether_addr() instead of memcmp to check
if the ethernet address is broadcast address.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230804083841.1321554-2-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use is_zero_ether_addr() instead of memcmp to check
if the ethernet address is all zeros.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230804083841.1321554-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following checkpatch issue:
- CHECK: Using comparison to false is error prone

Signed-off-by: Franziska Naepelt <franziska.naepelt@googlemail.com>
Link: https://lore.kernel.org/r/20230722215927.4443-1-franziska.naepelt@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following checkpatch issues:
- CHECK: spaces preferred around that '+' (ctx:VxV)
- CHECK: spaces preferred around that '&' (ctx:VxV)
- CHECK: spaces preferred around that '|' (ctx:VxV)
- CHECK: spaces required around that ':' (ctx:VxV)

Signed-off-by: Franziska Naepelt <franziska.naepelt@googlemail.com>
Link: https://lore.kernel.org/r/20230722215916.4413-1-franziska.naepelt@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>