linux.git/drivers/staging/media, branch v6.16

treewide, timers: Rename from_timer() to timer_container_of()

2025-06-08T07:07:37+00:00

Move this API to the canonical timer_*() namespace.

[ tglx: Redone against pre rc1 ]

Signed-off-by: Ingo Molnar 
Signed-off-by: Thomas Gleixner 
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com

media: rkvdec: h264: Support High 10 and 4:2:2 profiles

2025-05-15T06:13:32+00:00

Add support and enable decoding of H264 High 10 and 4:2:2 profiles.

Decoded CAPTURE buffer width is aligned to 64 pixels to accommodate HW
requirement of 10-bit format buffers, fixes decoding of all the 4:2:2
and 10bit 4:2:2 flusters tests except two stream that present some
visual artifacts.

- Hi422FREXT17_SONY_A
- Hi422FREXT19_SONY_A

The get_image_fmt() ops is implemented to select an image format
required for the provided SPS control, and returns RKVDEC_IMG_FMT_ANY
for other controls.

Signed-off-by: Jonas Karlman 
Reviewed-by: Nicolas Dufresne 
Tested-by: Nicolas Dufresne 
Tested-by: Christopher Obbard 
Signed-off-by: Nicolas Dufresne 
Signed-off-by: Hans Verkuil

media: rkvdec: Add get_image_fmt ops

2025-05-15T06:13:31+00:00

Add support for a get_image_fmt() ops that returns the required image
format.

The CAPTURE format is reset when the required image format changes and
the buffer queue is not busy.

Signed-off-by: Jonas Karlman 
Tested-by: Nicolas Dufresne 
Reviewed-by: Jonas Karlman 
Co-developed-by: Nicolas Dufresne 
Signed-off-by: Nicolas Dufresne 
Signed-off-by: Hans Verkuil

media: rkvdec: Initialize the m2m context before the controls

2025-05-15T06:13:31+00:00

Setting up the control handler calls into .s_ctrl ops. While validating
the controls the ops may need to access some of the context state, which
could lead to a crash if not properly initialized.

Signed-off-by: Nicolas Dufresne 
Signed-off-by: Hans Verkuil

media: rkvdec: h264: Limit minimum profile to constrained baseline

2025-05-15T06:13:31+00:00

Neither the hardware nor the kernel API support FMO/ASO features
required by the full baseline profile. Therefore limit the minimum
profile to the constrained baseline profile explicitly.

Suggested-by: Nicolas Dufresne 
Signed-off-by: Sebastian Fricke 
Signed-off-by: Nicolas Dufresne 
Signed-off-by: Hans Verkuil

media: atomisp: Remove atomisp-mt9m114 driver

2025-05-05T07:47:28+00:00

The "media: atomisp: Add support for sensors with a separate ISP
v4l2_subdev" combined with some pending drivers/media/i2c/mt9m114.c changes
makes the atomisp work nicely with the standard V4L2 mt9m114.c driver,
avoiding the need for the atomisp specific atomisp-mt9m114 driver.

The normal driver actually works better since the atomisp-mt9m114 driver
does not have working exposure control, leading to a much too dark image.

Remove the no longer necessary atomisp-mt9m114 driver.

Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Mauro Carvalho Chehab

media: atomisp: Add support for sensors with a separate ISP v4l2_subdev

2025-05-05T07:47:28+00:00

Some sensors have an ISP inside the sensor which the sensor driver models
as a separate v4l2-subdev, like the mt9m114 sensor-driver does.

Since the atomisp driver emulates a standard /dev/video# v4l2-device
without requiring the application to be aware of media-controller centric
/dev/video# devices this requires some special handling in the driver.

Add support for this setup to the atomisp driver.

Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Mauro Carvalho Chehab

media: atomisp: Avoid deadlock with sensor subdevs with state_lock set

2025-05-05T07:47:28+00:00

When a (sensor) v4l2_subdev has its state_lock member set to non NULL,
then all v4l2_subdev_state-s for the sensor share the same lock.

atomisp_init_sensor() calls v4l2_subdev_lock_and_get_active_state() and
then later on also tries to lock a separate v4l2_subdev_state used for try
calls (rather then changing the active state), while still holding
the active state lock.

Since this try v4l2_subdev_state shares a lock with the active state this
results in a deadlock.

Skip locking try_sd_state when sensor->state_lock is set to avoid this.

Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Mauro Carvalho Chehab

media: atomisp: Rename camera to sensor

2025-05-05T07:47:28+00:00

The camera v4l2_subdev pointer in struct atomisp_input_subdev points to
an image sensor, rename camera to sensor to make this more clear.

Signed-off-by: Hans de Goede 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Mauro Carvalho Chehab

media: atomisp: Remove compat ioctl32 header file

2025-05-05T07:47:28+00:00

The atomisp_compat_ioctl32() function was deleted in commit b4c650f1af68
("media: atomisp: remove compat_ioctl32 code"), so this header file is no
longer needed.

Additionally, the definition of atomisp_compat_ioctl32() in atomisp_ioctl.h
is unused as well. Delete the declaration from the header.

Signed-off-by: Hardevsinh Palaniya 
Reviewed-by: Andy Shevchenko 
Link: https://lore.kernel.org/r/20250421052804.11721-1-hardevsinh.palaniya@siliconsignals.io
Signed-off-by: Hans de Goede 
Signed-off-by: Mauro Carvalho Chehab