Pull media updates from Mauro Carvalho Chehab: - the old V4L2 core videobuf kAPI was finally removed. All media drivers should now be using VB2 kAPI - new automotive driver: mgb4 - new platform video driver: npcm-video - new sensor driver: mt9m114 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge TI-specific parts - ir-rx51 was removed and the N900 DT binding was moved to the pwm-ir-tx generic driver - drop atomisp-specific ov5693, using the upstream driver instead - the camss driver has gained RDI3 support for VFE 17x - the atomisp driver now detects ISP2400 or ISP2401 at run time. No need to set it up at build time anymore - lots of driver fixes, cleanups and improvements * tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits) media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM media: venus: Fix firmware path for resources media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by media: venus: hfi_parser: Add check to keep the number of codecs within range media: venus: hfi: add checks to handle capabilities from firmware media: venus: hfi: fix the check to handle session buffer requirement media: venus: hfi: add checks to perform sanity on queue pointers media: platform: cadence: select MIPI_DPHY dependency media: MAINTAINERS: Fix path for J721E CSI2RX bindings media: cec: meson: always include meson sub-directory in Makefile media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr() media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config() media: mediatek: vcodec: using encoder device to alloc/free encoder memory media: imx-jpeg: notify source chagne event when the first picture parsed media: cx231xx: Use EP5_BUF_SIZE macro media: siano: Drop unnecessary error check for debugfs_create_dir/file() media: mediatek: vcodec: Handle invalid encoder vsi media: aspeed: Drop unnecessary error check for debugfs_create_file() Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED Documentation: media: gen-errors.rst: fix confusing ENOTTY description ...
This fixes two smatch warnings: drivers/staging/media/atomisp/pci/atomisp_cmd.c:2779 atomisp_cp_dvs_6axis_config() warn: missing unwind goto? drivers/staging/media/atomisp/pci/atomisp_cmd.c:2878 atomisp_cp_morph_table() warn: missing unwind goto? Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> CC: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Also fixes a smatch warning: drivers/staging/media/atomisp/i2c/atomisp-gc0310.c:446 gc0310_s_stream() warn: missing error code 'ret' Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> CC: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
The current Kconfig symbol dependencies allow having the following Kconfig
symbol values
CONFIG_IPU_BRIDGE=m
CONFIG_VIDEO_IPU3_CIO2=y
CONFIG_CIO2_BRIDGE=n
This does not work as the IPU bridge API is conditional to
IS_ENABLED(CONFIG_IPU_BRIDGE). Fix this by changing the dependencies so
that CONFIG_IPU_BRIDGE can be separately selected.
The CONFIG_CIO2_BRIDGE symbol becomes redundant as a result and is
removed.
Fixes: 2545a2c02ba1 ("media: ipu3-cio2: allow ipu_bridge to be a module again")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes these compiler warnings:
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c: In function 'ia_css_debug_pipe_graph_dump_stage':
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2786:66: warning: '\n' directive output may be truncated writing 2 bytes into a region of size between 0 and 198 [-Wformat-truncation=]
2786 | "%s\\n%s\\n%s",
| ^~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2785:49: note: 'snprintf' output between 5 and 302 bytes into a destination of size 200
2785 | snprintf(enable_info, sizeof(enable_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2786 | "%s\\n%s\\n%s",
| ~~~~~~~~~~~~~~~
2787 | enable_info1, enable_info2,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
2788 | enable_info3);
| ~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2772:66: warning: '\n' directive output may be truncated writing 2 bytes into a region of size between 0 and 198 [-Wformat-truncation=]
2772 | "%s\\n%s\\n%s",
| ^~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2771:49: note: 'snprintf' output between 5 and 302 bytes into a destination of size 200
2771 | snprintf(enable_info, sizeof(enable_info),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2772 | "%s\\n%s\\n%s",
| ~~~~~~~~~~~~~~~
2773 | enable_info1, enable_info2,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
2774 | enable_info3);
| ~~~~~~~~~~~~~
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2749:92: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
2749 | snprintf(enable_info, sizeof(enable_info), "%s\\n%s",
| ^
drivers/staging/media/atomisp/pci/runtime/debug/src/ia_css_debug.c:2749:41: note: 'snprintf' output between 3 and 201 bytes into a destination of size 200
2749 | snprintf(enable_info, sizeof(enable_info), "%s\\n%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2750 | enable_info1, enable_info2);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
If CONFIG_FORTIFY_SOURCE=y, then this warning is produced:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:23,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:9,
from ./include/linux/preempt.h:79,
from ./include/linux/spinlock.h:56,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:7,
from ./include/linux/slab.h:16,
from ./drivers/staging/media/atomisp//include/hmm/hmm.h:26,
from drivers/staging/media/atomisp/pci/sh_css_params.c:26:
In function ‘fortify_memcpy_chk’,
inlined from ‘sh_css_store_sp_group_to_ddr’ at drivers/staging/media/atomisp/pci/sh_css_params.c:3736:3:
./include/linux/fortify-string.h:592:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()?
[-Wattribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The reason is that the memcpy copies two fields (each a u8), when the source
pointer points to the first field. It's a bit unexpected, so just make this
explicit.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
After recent improvements to atomisp driver, the atomisp driver now works fine with the standard ov5693 driver. Drop the no longer necessary atomisp specific atomisp-ov5693 sensor driver. Link: https://lore.kernel.org/r/20230813152645.45834-2-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
ov5693 sensor modules have a VCM, but for unknown reasons the sensor fails to start streaming when instantiating a VCM i2c-client (and the runtime-pm link between VCM and sensor). Disable the VCM for now, until this is resolved. Link: https://lore.kernel.org/r/20230813152645.45834-1-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Endpoint matching is now handled by the v4l2-core and drivers no longer should set v4l2_subdev.fwnode to the endpoint fwnode. Link: https://lore.kernel.org/r/20230812133628.355812-1-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drop the VIDEO_ATOMISP_ISP2401 Kconfig option and the -DISP2401 cflags. This is no longer necessary since all ISP2400 vs ISP2401 differences are now dealt with at runtime. Many thanks to Kate Hsuan for all her work on this. Link: https://lore.kernel.org/r/20230812133523.355581-2-hdegoede@redhat.com Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>