linux.git/drivers/soundwire, branch v5.9-rc2

Merge tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next

2020-07-23T07:12:15+00:00

Vinod writes:

soundwire updates for 5.9-rc1

This contains few core changes and bunch of Intel driver updates:

 - Adds definitions for 1.2 spec
 - Sanyog left as a MAINTAINER and Bard took his place while Sanyog
   is a reviewer now.
 - Intel: Lots of updates to stream/dai handling, wake support and link
   synchronization.

* tag 'soundwire-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (31 commits)
  Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx
  soundwire: intel: add wake interrupt support
  soundwire: intel/cadence: merge Soundwire interrupt handlers/threads
  soundwire: intel_init: use EXPORT_SYMBOL_NS
  soundwire: intel_init: add implementation of sdw_intel_enable_irq()
  soundwire: intel: introduce helper for link synchronization
  soundwire: intel: introduce a helper to arm link synchronization
  soundwire: intel: revisit SHIM programming sequences.
  soundwire: intel: reuse code for wait loops to set/clear bits
  soundwire: fix the kernel-doc comment
  soundwire: sdw.h: fix indentation
  soundwire: sdw.h: fix PRBS/Static_1 swapped definitions
  soundwire: intel: don't free dma_data in DAI shutdown
  soundwire: cadence: allocate/free dma_data in set_sdw_stream
  soundwire: intel: remove stream allocation/free
  soundwire: stream: add helper to startup/shutdown streams
  soundwire: intel: implement get_sdw_stream() operations
  MAINTAINERS: change SoundWire maintainer
  soundwire: bus: initialize bus clock base and scale registers
  soundwire: extend SDW_SLAVE_ENTRY
  ...

Soundwire: intel_init: save Slave(s) _ADR info in sdw_intel_ctx

2020-07-21T10:35:41+00:00

Save ACPI information in context so that we can match machine driver
with sdw _ADR matching tables.

Suggested-by: Guennadi Liakhovetski 
Signed-off-by: Bard Liao 
Signed-off-by: Pierre-Louis Bossart 
Link: https://lore.kernel.org/r/20200716150947.22119-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel: add wake interrupt support

2020-07-21T10:35:41+00:00

When system is suspended in clock stop mode on intel platforms, both
master and slave are in clock stop mode and soundwire bus is taken
over by a glue hardware. The bus message for jack event is processed
by this glue hardware, which will trigger an interrupt to resume audio
pci device. Then audio pci driver will resume soundwire master and slave,
transfer bus ownership to master, finally slave will report jack event
to master and codec driver is triggered to check jack status.

if a slave has been attached to a bus, the slave->dev_num_sticky
should be non-zero, so we can check this value to skip the
ghost devices defined in ACPI table but not populated in hardware.

Signed-off-by: Rander Wang 
Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20200716150947.22119-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel/cadence: merge Soundwire interrupt handlers/threads

2020-07-21T10:35:41+00:00

The existing code uses one pair of interrupt handler/thread per link
but at the hardware level the interrupt is shared. This works fine for
legacy PCI interrupts, but leads to timeouts in MSI (Message-Signaled
Interrupt) mode, likely due to edges being lost.

This patch unifies interrupt handling for all links. The dedicated
handler is removed since we use a common one for all shared interrupt
sources, and the thread function takes care of dealing with interrupt
sources. This partition follows the model used for the SOF IPC on
HDaudio platforms, where similar timeout issues were noticed and doing
all the interrupt handling/clearing in the thread improved
reliability/stability.

Validation results with 4 links active in parallel show a night-and-day
improvement with no timeouts noticed even during stress tests. Latency
and quality of service are not affected by the change - mostly because
events on a SoundWire link are throttled by the bus frame rate
(typically 8..48kHz).

Signed-off-by: Bard Liao 
Signed-off-by: Pierre-Louis Bossart 
Link: https://lore.kernel.org/r/20200716150947.22119-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel_init: use EXPORT_SYMBOL_NS

2020-07-21T10:35:40+00:00

Make sure all symbols in this soundwire-intel-init module are exported
with a namespace.

The MODULE_IMPORT_NS will be used in Intel/SOF HDaudio modules to be
posted in a separate series.

Namespaces are only introduced for the Intel parts of the SoundWire
code at this time, in future patches we should also add namespaces for
Cadence parts and the SoundWire core.

Suggested-by: Greg KH 
Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20200716150947.22119-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel_init: add implementation of sdw_intel_enable_irq()

2020-07-21T10:35:40+00:00

This function is required to enable all interrupts across all links.

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20200716150947.22119-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel: introduce helper for link synchronization

2020-07-21T10:35:40+00:00

After arming the synchronization, the SYNCGO field controls the
hardware-based synchronization between links.

Move the programming and wait for clear of SYNCGO to dedicated helper.

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20200716150947.22119-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel: introduce a helper to arm link synchronization

2020-07-21T10:35:40+00:00

Move code from pre_bank_switch to dedicated helper, will be used in
follow-up patches as recommended by programming flows.

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20200716150947.22119-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel: revisit SHIM programming sequences.

2020-07-21T10:35:40+00:00

Somehow the existing code is not aligned with the steps described in
the documentation, refactor code and make sure the register
programming sequences are correct. Also add missing power-up,
power-down and wake capabilities (the last two are used in follow-up
patches but introduced here for consistency).

Some of the SHIM registers exposed fields that are link specific, and
in addition some of the power-related registers (SPA/CPA) take time to
be updated. Uncontrolled access leads to timeouts or errors. Add a
mutex, shared by all links, so that all accesses to such registers are
serialized, and follow a pattern of read-modify-write.

This includes making sure SHIM_SYNC is programmed only once, before
the first master is powered on. We use a 'shim_mask' field, shared
between all links and protected by a mutex, to deal with power-up and
power-down sequences.

Note that the SYNCPRD value is tied only to the XTAL value and not the
current bus frequency or the frame rate.

BugLink: https://github.com/thesofproject/linux/issues/1555
Signed-off-by: Rander Wang 
Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20200716150947.22119-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul

soundwire: intel: reuse code for wait loops to set/clear bits

2020-07-21T10:35:40+00:00

Refactor code and use same routines on set/clear

Signed-off-by: Pierre-Louis Bossart 
Signed-off-by: Bard Liao 
Link: https://lore.kernel.org/r/20200716150947.22119-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul