linux.git/drivers/soc, branch v7.2-rc1 Linux kernel source tree Merge tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2026-06-17T18:21:40+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-06-17T18:21:40+00:00 70cb95c736807da2c4952423c9f9afe470341996 Pull SoC driver updates from Arnd Bergmann: "There are a few added drivers, but mostly the normal maintenance to drivers for firmware, memory controller and other soc specific hardware: - The NXP QuickEngine gets modern MSI support, which allows some cleanups to the GICv3 irqchip chip driver - A new SoC specific driver for the Renesas R-Car MFIS unit is added, encapsulating support for the on-chip mailbox and hwspinlock implementations that are not easily separated into individual drivers - The Qualcomm SoC drivers add support for additional SoC implementations, and flexibility around power management for the serial-engine driver as well as probing the LLCC driver using custom hardware descriptions inside of the device itself. - Added support for the Samsung thermal management unit - A cleanup to the Tegra 'PMC' driver interfaces to remove legacy APIs and allow multiple PMC instances everywhere. - Updates to the TI SCI and KNAS drivers to improve suspend/resume support. - Minor driver changes for mediatek, xilinx, allwinner, aspeed, tegra, broadcom, amd, microchip and starfive specific drivers - Memory controller updates for Tegra and Renesas for additional SoC types and other improvements. - Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to update driver probing, object lifetimes and address minor bugs" * tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits) Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface" Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers" memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate() memory: tegra264: drop redundant tegra264_mc_icc_aggregate() memory: tegra186-emc: stop borrowing MC aggregate hook for EMC soc: aspeed: cleanup dead default for ASPEED_SOCINFO firmware: tegra: bpmp: Add support for multi-socket platforms firmware: tegra: bpmp: Propagate debugfs errors soc/tegra: pmc: Add Tegra238 support soc/tegra: pmc: Restrict power-off handler to Nexus 7 soc/tegra: pmc: Populate powergate debugfs only when needed soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard soc/tegra: pmc: Remove unused legacy functions soc/tegra: pmc: Create PMC context dynamically firmware: samsung: acpm: remove compile-testing stubs firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper firmware: samsung: acpm: Add TMU protocol support firmware: samsung: acpm: Make acpm_ops const and access via pointer firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr ... 
Pull SoC driver updates from Arnd Bergmann:
 "There are a few added drivers, but mostly the normal maintenance to
  drivers for firmware, memory controller and other soc specific
  hardware:

   - The NXP QuickEngine gets modern MSI support, which allows some
     cleanups to the GICv3 irqchip chip driver

   - A new SoC specific driver for the Renesas R-Car MFIS unit is added,
     encapsulating support for the on-chip mailbox and hwspinlock
     implementations that are not easily separated into individual
     drivers

   - The Qualcomm SoC drivers add support for additional SoC
     implementations, and flexibility around power management for the
     serial-engine driver as well as probing the LLCC driver using
     custom hardware descriptions inside of the device itself.

   - Added support for the Samsung thermal management unit

   - A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
     APIs and allow multiple PMC instances everywhere.

   - Updates to the TI SCI and KNAS drivers to improve suspend/resume
     support.

   - Minor driver changes for mediatek, xilinx, allwinner, aspeed,
     tegra, broadcom, amd, microchip and starfive specific drivers

   - Memory controller updates for Tegra and Renesas for additional SoC
     types and other improvements.

   - Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
     update driver probing, object lifetimes and address minor bugs"

* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
  Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
  Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
  memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
  memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
  memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
  soc: aspeed: cleanup dead default for ASPEED_SOCINFO
  firmware: tegra: bpmp: Add support for multi-socket platforms
  firmware: tegra: bpmp: Propagate debugfs errors
  soc/tegra: pmc: Add Tegra238 support
  soc/tegra: pmc: Restrict power-off handler to Nexus 7
  soc/tegra: pmc: Populate powergate debugfs only when needed
  soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
  soc/tegra: pmc: Remove unused legacy functions
  soc/tegra: pmc: Create PMC context dynamically
  firmware: samsung: acpm: remove compile-testing stubs
  firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
  firmware: samsung: acpm: Add TMU protocol support
  firmware: samsung: acpm: Make acpm_ops const and access via pointer
  firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
  firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
  ...
Merge tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core 2026-06-15T07:11:17+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-06-15T07:11:17+00:00 36808d5e983985bbda87e01059cccc071fe3ec8d Pull driver core updates from Danilo Krummrich: "Deferred probe: - Fix race where deferred probe timeout work could be permanently canceled by using mod_delayed_work() - Fix missing jiffies conversion in deferred_probe_extend_timeout() - Guard timeout extension with delayed_work_pending() to prevent premature firing - Use system_percpu_wq instead of the deprecated system_wq - Update deferred_probe_timeout documentation device: - Replace direct struct device bitfield access (can_match, dma_iommu, dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent, of_node_reused, offline, offline_disabled) with flag-based accessors using bit operations - Reject devices with unregistered buses - Delete unused DEVICE_ATTR_PREALLOC() - Add low-level device attribute macros with const show/store callbacks, allowing device attributes to reside in read-only memory - Move core device attributes to read-only memory - Constify group array pointers in driver_add_groups() / driver_remove_groups(), struct bus_type, and struct device_driver device property: - Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id() - Initialize all fields of fwnode_handle in fwnode_init() - Provide swnode_get()/swnode_put() wrappers around kobject_get/put() - Allow passing struct software_node_ref_args pointers directly to PROPERTY_ENTRY_REF() driver_override: - Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override infrastructure, fixing a UAF from unsynchronized access to driver_override in bus match() callbacks - Remove the now-unused driver_set_override() firmware loader: - Fix recursive lock deadlock in device_cache_fw_images() when async work falls back to synchronous execution - Fix device reference leak in firmware_upload_register() platform: - Pass KBUILD_MODNAME through the platform driver registration macro to create module symlinks in sysfs for built-in drivers; move module_kset initialization to a pure_initcall and tegra cbb registration to core_initcall to ensure correct ordering - Pass THIS_MODULE implicitly through a coresight_init_driver() macro sysfs: - Upgrade OOB write detection in sysfs_kf_seq_show() from printk to WARN - Add return value clamping to sysfs_kf_read() Rust: - ACPI: Fix missing match data for PRP0001 by exporting acpi_of_match_device() - Auxiliary: Replace drvdata() with dedicated registration data on auxiliary_device. drvdata() exposed the driver's bus device private data beyond the driver's own scope, creating ordering constraints and forcing the data to outlive all registrations that access it. Registration data is instead scoped structurally to the Registration object, making lifecycle ordering enforced by construction rather than convention. - Rust-native device driver lifetimes (HRT): Allow Rust device drivers to carry a lifetime parameter on their bus device private data, tied to the device binding scope -- the interval during which a bus device is bound to a driver. Device resources like pci::Bar<'a> and IoMem<'a> can be stored directly in the driver's bus device private data with a lifetime bounded by the binding scope, so the compiler enforces at build time that they do not outlive the binding. This removes Devres indirection from every access site and eliminates try_access() failure paths in destructors. Bus driver traits use a Generic Associated Type (GAT) Data<'bound> to introduce the lifetime on the private data, rather than parameterizing the Driver trait itself. Auxiliary registration data, where the lifetime is not introduced by a trait callback but must be threaded through Registration, uses the ForLt trait (a type-level abstraction for types generic over a lifetime). Misc: - Fix DT overlayed devices not probing by reverting the broken treewide overlay fix and re-running fw_devlink consumer pickup when an overlay is applied to a bound device - Use root_device_register() for faux bus root device; add sanity check for failed bus init - Fix dev_has_sync_state() data race with READ_ONCE() and move it to base.h - Avoid spurious device_links warning when removing a device while its supplier is unbinding - Switch ISA bus to dynamic root device - Fix suspicious RCU usage in kernfs_put() - Remove devcoredump exit callback - Constify devfreq_event_class" * tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits) software node: allow passing reference args to PROPERTY_ENTRY_REF() driver core: platform: set mod_name in driver registration coresight: pass THIS_MODULE implicitly through a macro kernel: param: initialize module_kset in a pure_initcall soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall firmware_loader: Fix recursive lock in device_cache_fw_images() driver core: Use system_percpu_wq instead of system_wq driver core: remove driver_set_override() rpmsg: use generic driver_override infrastructure Drivers: hv: vmbus: use generic driver_override infrastructure cdx: use generic driver_override infrastructure amba: use generic driver_override infrastructure rust: devres: add 'static bound to Devres<T> samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data rust: auxiliary: generalize Registration over ForLt rust: types: add `ForLt` trait for higher-ranked lifetime support gpu: nova-core: separate driver type from driver data samples: rust: rust_driver_pci: use HRT lifetime for Bar rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized rust: pci: make Bar lifetime-parameterized ... 
Pull driver core updates from Danilo Krummrich:
 "Deferred probe:
   - Fix race where deferred probe timeout work could be permanently
     canceled by using mod_delayed_work()
   - Fix missing jiffies conversion in deferred_probe_extend_timeout()
   - Guard timeout extension with delayed_work_pending() to prevent
     premature firing
   - Use system_percpu_wq instead of the deprecated system_wq
   - Update deferred_probe_timeout documentation

  device:
   - Replace direct struct device bitfield access (can_match, dma_iommu,
     dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
     of_node_reused, offline, offline_disabled) with flag-based
     accessors using bit operations
   - Reject devices with unregistered buses
   - Delete unused DEVICE_ATTR_PREALLOC()
   - Add low-level device attribute macros with const show/store
     callbacks, allowing device attributes to reside in read-only memory
   - Move core device attributes to read-only memory
   - Constify group array pointers in driver_add_groups() /
     driver_remove_groups(), struct bus_type, and struct device_driver

  device property:
   - Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
   - Initialize all fields of fwnode_handle in fwnode_init()
   - Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
   - Allow passing struct software_node_ref_args pointers directly to
     PROPERTY_ENTRY_REF()

  driver_override:
   - Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
     infrastructure, fixing a UAF from unsynchronized access to
     driver_override in bus match() callbacks
   - Remove the now-unused driver_set_override()

  firmware loader:
   - Fix recursive lock deadlock in device_cache_fw_images() when async
     work falls back to synchronous execution
   - Fix device reference leak in firmware_upload_register()

  platform:
   - Pass KBUILD_MODNAME through the platform driver registration macro
     to create module symlinks in sysfs for built-in drivers; move
     module_kset initialization to a pure_initcall and tegra cbb
     registration to core_initcall to ensure correct ordering
   - Pass THIS_MODULE implicitly through a coresight_init_driver() macro

  sysfs:
   - Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
     WARN
   - Add return value clamping to sysfs_kf_read()

  Rust:
   - ACPI:

     Fix missing match data for PRP0001 by exporting
     acpi_of_match_device()

   - Auxiliary:

     Replace drvdata() with dedicated registration data on
     auxiliary_device. drvdata() exposed the driver's bus device private
     data beyond the driver's own scope, creating ordering constraints
     and forcing the data to outlive all registrations that access it.
     Registration data is instead scoped structurally to the
     Registration object, making lifecycle ordering enforced by
     construction rather than convention.

   - Rust-native device driver lifetimes (HRT):

     Allow Rust device drivers to carry a lifetime parameter on their
     bus device private data, tied to the device binding scope -- the
     interval during which a bus device is bound to a driver. Device
     resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
     the driver's bus device private data with a lifetime bounded by the
     binding scope, so the compiler enforces at build time that they do
     not outlive the binding. This removes Devres indirection from every
     access site and eliminates try_access() failure paths in
     destructors.

     Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
     to introduce the lifetime on the private data, rather than
     parameterizing the Driver trait itself. Auxiliary registration
     data, where the lifetime is not introduced by a trait callback but
     must be threaded through Registration, uses the ForLt trait (a
     type-level abstraction for types generic over a lifetime).

  Misc:
   - Fix DT overlayed devices not probing by reverting the broken
     treewide overlay fix and re-running fw_devlink consumer pickup when
     an overlay is applied to a bound device
   - Use root_device_register() for faux bus root device; add sanity
     check for failed bus init
   - Fix dev_has_sync_state() data race with READ_ONCE() and move it to
     base.h
   - Avoid spurious device_links warning when removing a device while
     its supplier is unbinding
   - Switch ISA bus to dynamic root device
   - Fix suspicious RCU usage in kernfs_put()
   - Remove devcoredump exit callback
   - Constify devfreq_event_class"

* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
  software node: allow passing reference args to PROPERTY_ENTRY_REF()
  driver core: platform: set mod_name in driver registration
  coresight: pass THIS_MODULE implicitly through a macro
  kernel: param: initialize module_kset in a pure_initcall
  soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
  firmware_loader: Fix recursive lock in device_cache_fw_images()
  driver core: Use system_percpu_wq instead of system_wq
  driver core: remove driver_set_override()
  rpmsg: use generic driver_override infrastructure
  Drivers: hv: vmbus: use generic driver_override infrastructure
  cdx: use generic driver_override infrastructure
  amba: use generic driver_override infrastructure
  rust: devres: add 'static bound to Devres<T>
  samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
  rust: auxiliary: generalize Registration over ForLt
  rust: types: add `ForLt` trait for higher-ranked lifetime support
  gpu: nova-core: separate driver type from driver data
  samples: rust: rust_driver_pci: use HRT lifetime for Bar
  rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
  rust: pci: make Bar lifetime-parameterized
  ...
Merge tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm 2026-06-15T06:05:11+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-06-15T06:05:11+00:00 f3c4a338b5064effd9ce6d2cfd26c73daa56f1f4 Pull thermal control updates from Rafael Wysocki: "These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in the thermal control core and drivers, clean up code and refactor it in preparation for future changes: - Rework the initialization and cleanup of thermal class cooling devices to separate DT-based cooling device registration and cooling device registration without DT (Daniel Lezcano, Ovidiu Panait) - Update the cooling device DT bindings to support 3-cell cooling device representation, where the additional cell holds an ID to select a cooling mechanism for devices that offer multiple cooling mechanisms, and adjust the cooling device registration code accordingly (Gaurav Kohli, Daniel Lezcano) - Remove dead code from two functions in the thermal core and simplify the unregistration of thermal governors (Rafael Wysocki) - Fix critical temperature attribute removal handling in the generic thermal zone hwmon support code and rework that code to register a separate hwmon class device for each thermal zone (instead of using one hwmon class device for all thermal zones of the same type) to address thermal zone removal deadlocks (Rafael Wysocki) - Use attribute groups for adding temperature attributes to hwmon class devices associated with thermal zones (Rafael Wysocki) - Pass WQ_UNBOUND when allocating the thermal workqueue (Marco Crivellari) - Fix potential shift overflow in ptc_mmio_write() and improve error handling in proc_thermal_ptc_add() in the int340x thermal control driver (Aravind Anilraj) - Use sysfs_emit() for cpumask printing in the Intel powerclamp thermal driver (Yury Norov) - Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas Pandruvada) - Add QCom Nord, Shikra and Hawi temperature sensor DT bindings (Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre) - Use devm_add_action_or_reset() for clock disable on the NVidia soctherm and switch it to devm cooling device registration version (Daniel Lezcano) - Add the Amlogic T7 thermal sensor along with thermal calibration data read from SMC calls (Ronald Claveau) - Fix atomic temperature read in the QCom tsens driver to comply with hardware documentation (Priyansh Jain) - Add SpacemiT K1 thermal sensor support (Shuwei Wu) - Add i.MX93 temperature sensor support and filter out the invalid temperature (Jacky Bai) - Enable by default the TMU (Thermal Monitoring Unit) on Exynos platform (Krzysztof Kozlowski) - Rework interrupt initialization in the Tsens driver and add the optional wakeup source (Priyansh Jain) - Fix typo in a comment in the TSens QCom driver (Jinseok Kim) - Fix trailing whitespace and repeated word in the OF code, remove quoted string splitting across lines from the iMX7 driver, and remove a stray space from the thermal_trip_of_attr() macro definition (Mayur Kumar) - Update the thermal testing facility code to avoid NULL pointer dereferences by rejecting missing command arguments and replace sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu Panait, Samuel Moelius)" * tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits) thermal: sysfs: Replace sscanf() with kstrtoul() thermal: testing: Replace sscanf() with kstrtoint() thermal: testing: reject missing command arguments thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks thermal/core: Fix missing stub for devm_thermal_cooling_device_register dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device thermal/of: Support cooling device ID in cooling-spec thermal/of: Pass cdev_id and introduce devm registration helper thermal/of: Add cooling device ID support thermal/of: Rename the devm_thermal_of_cooling_device_register() function thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF thermal/of: Move cooling device OF helpers out of thermal core hwmon: Use non-OF thermal cooling device registration API thermal/core: Add devm_thermal_cooling_device_register() thermal/core: Introduce non-OF thermal_cooling_device_register() thermal/drivers/samsung: Enable TMU by default thermal/driver/qoriq: Workaround unexpected temperature readings from tmu thermal/drivers/qoriq: Add i.MX93 tmu support ... 
Pull thermal control updates from Rafael Wysocki:
 "These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
  Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
  the thermal control core and drivers, clean up code and refactor it in
  preparation for future changes:

   - Rework the initialization and cleanup of thermal class cooling
     devices to separate DT-based cooling device registration and
     cooling device registration without DT (Daniel Lezcano, Ovidiu
     Panait)

   - Update the cooling device DT bindings to support 3-cell cooling
     device representation, where the additional cell holds an ID to
     select a cooling mechanism for devices that offer multiple cooling
     mechanisms, and adjust the cooling device registration code
     accordingly (Gaurav Kohli, Daniel Lezcano)

   - Remove dead code from two functions in the thermal core and
     simplify the unregistration of thermal governors (Rafael Wysocki)

   - Fix critical temperature attribute removal handling in the generic
     thermal zone hwmon support code and rework that code to register a
     separate hwmon class device for each thermal zone (instead of using
     one hwmon class device for all thermal zones of the same type) to
     address thermal zone removal deadlocks (Rafael Wysocki)

   - Use attribute groups for adding temperature attributes to hwmon
     class devices associated with thermal zones (Rafael Wysocki)

   - Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
     Crivellari)

   - Fix potential shift overflow in ptc_mmio_write() and improve error
     handling in proc_thermal_ptc_add() in the int340x thermal control
     driver (Aravind Anilraj)

   - Use sysfs_emit() for cpumask printing in the Intel powerclamp
     thermal driver (Yury Norov)

   - Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
     Pandruvada)

   - Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
     (Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)

   - Use devm_add_action_or_reset() for clock disable on the NVidia
     soctherm and switch it to devm cooling device registration version
     (Daniel Lezcano)

   - Add the Amlogic T7 thermal sensor along with thermal calibration
     data read from SMC calls (Ronald Claveau)

   - Fix atomic temperature read in the QCom tsens driver to comply with
     hardware documentation (Priyansh Jain)

   - Add SpacemiT K1 thermal sensor support (Shuwei Wu)

   - Add i.MX93 temperature sensor support and filter out the invalid
     temperature (Jacky Bai)

   - Enable by default the TMU (Thermal Monitoring Unit) on Exynos
     platform (Krzysztof Kozlowski)

   - Rework interrupt initialization in the Tsens driver and add the
     optional wakeup source (Priyansh Jain)

   - Fix typo in a comment in the TSens QCom driver (Jinseok Kim)

   - Fix trailing whitespace and repeated word in the OF code, remove
     quoted string splitting across lines from the iMX7 driver, and
     remove a stray space from the thermal_trip_of_attr() macro
     definition (Mayur Kumar)

   - Update the thermal testing facility code to avoid NULL pointer
     dereferences by rejecting missing command arguments and replace
     sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
     Panait, Samuel Moelius)"

* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
  thermal: sysfs: Replace sscanf() with kstrtoul()
  thermal: testing: Replace sscanf() with kstrtoint()
  thermal: testing: reject missing command arguments
  thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
  thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
  thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
  thermal/core: Fix missing stub for devm_thermal_cooling_device_register
  dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
  thermal/of: Support cooling device ID in cooling-spec
  thermal/of: Pass cdev_id and introduce devm registration helper
  thermal/of: Add cooling device ID support
  thermal/of: Rename the devm_thermal_of_cooling_device_register() function
  thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
  thermal/of: Move cooling device OF helpers out of thermal core
  hwmon: Use non-OF thermal cooling device registration API
  thermal/core: Add devm_thermal_cooling_device_register()
  thermal/core: Introduce non-OF thermal_cooling_device_register()
  thermal/drivers/samsung: Enable TMU by default
  thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
  thermal/drivers/qoriq: Add i.MX93 tmu support
  ...
Merge tag 'soc-fixes-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2026-06-12T15:44:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-06-12T15:44:56+00:00 fd41dc46db5eecf21c9d53fe034a731a2767030a Pull SoC fixes from Arnd Bergmann: "Two more small fixes came in, both addressing corner cases in platform specific code: the microchip mpfs system controller probe and the CPU power management on 32-bit rockchips SoCs" * tag 'soc-fixes-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: rockchip: keep reset control around soc: microchip: mpfs-sys-controller: fix resource leak on probe error 
Pull SoC fixes from Arnd Bergmann:
 "Two more small fixes came in, both addressing corner cases in platform
  specific code: the microchip mpfs system controller probe and the CPU
  power management on 32-bit rockchips SoCs"

* tag 'soc-fixes-7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: rockchip: keep reset control around
  soc: microchip: mpfs-sys-controller: fix resource leak on probe error
Merge tag 'ti-driver-soc-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers 2026-06-09T14:59:20+00:00 Arnd Bergmann arnd@arndb.de 2026-06-09T14:59:20+00:00 10c24a2a37f3ea27264998de0bda5ee0e33ec9e9 TI SoC driver updates for v7.2 TI K3 TISCI: - ti_sci: Add BOARDCFG_MANAGED mode for support system suspend/resume cycles - ti_sci: Add support for restoring IRQ and clock contexts during resume. - clk: keystone: sci-clk: Add clock restoration support. SoC Drivers: - k3-socinfo: Add support for identifying AM62P silicon variants via NVMEM, along with corresponding dt-bindings update for nvmem-cells support - k3-ringacc: Fix incorrect access mode for ring pop tail IO/proxy operations Keystone Navigator (knav) Cleanup and Fixes: - knav_qmss: Multiple code quality improvements - knav_qmss_queue: Implement proper resource cleanup in the remove() path General Cleanups: - k3-ringacc: Use str_enabled_disabled() helper for consistency - knav_qmss: Use %pe format specifier for PTR_ERR() printing * tag 'ti-driver-soc-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: firmware: ti_sci: Add support for restoring clock context during resume clk: keystone: sci-clk: Add restore_context() operation firmware: ti_sci: Add support for restoring IRQs during resume firmware: ti_sci: Add BOARDCFG_MANAGED mode support soc: ti: k3-ringacc: Use str_enabled_disabled() helper soc: ti: knav_dma: Use IOMEM_ERR_PTR() in pktdma_get_regs() soc: ti: knav_dma: Remove dead check on unsigned args.args[0] soc: ti: knav_dma: Remove unused DMA_PRIO_MASK macro soc: ti: knav_qmss_acc: Fix kernel-doc Return: tag soc: ti: knav_qmss: Fix __iomem annotations and __be32 type soc: ti: knav_qmss: Use %pe to print PTR_ERR() soc: ti: knav_qmss: Fix kernel-doc Return: tags soc: ti: knav_qmss: Inline lockdep condition in for_each_handle_rcu soc: ti: knav_qmss: Rename global kdev to knav_qdev to fix -Wshadow soc: ti: knav_qmss: Remove remaining redundant ENOMEM printks soc: ti: knav_qmss_queue: Implement resource cleanup in remove() soc: ti: k3-ringacc: Fix access mode for k3_ringacc_ring_pop_tail_io/proxy soc: ti: knav_dma: fix all kernel-doc warnings in knav_dma.h soc: ti: k3-socinfo: Add support for AM62P variants via NVMEM dt-bindings: hwinfo: ti,k3-socinfo: Add nvmem-cells support Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
TI SoC driver updates for v7.2

TI K3 TISCI:
- ti_sci: Add BOARDCFG_MANAGED mode for support system suspend/resume cycles
- ti_sci: Add support for restoring IRQ and clock contexts during resume.
- clk: keystone: sci-clk: Add clock restoration support.

SoC Drivers:
- k3-socinfo: Add support for identifying AM62P silicon variants via NVMEM,
  along with corresponding dt-bindings update for nvmem-cells support
- k3-ringacc: Fix incorrect access mode for ring pop tail IO/proxy operations

Keystone Navigator (knav) Cleanup and Fixes:
- knav_qmss: Multiple code quality improvements
- knav_qmss_queue: Implement proper resource cleanup in the remove() path

General Cleanups:
- k3-ringacc: Use str_enabled_disabled() helper for consistency
- knav_qmss: Use %pe format specifier for PTR_ERR() printing

* tag 'ti-driver-soc-for-v7.2' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  firmware: ti_sci: Add support for restoring clock context during resume
  clk: keystone: sci-clk: Add restore_context() operation
  firmware: ti_sci: Add support for restoring IRQs during resume
  firmware: ti_sci: Add BOARDCFG_MANAGED mode support
  soc: ti: k3-ringacc: Use str_enabled_disabled() helper
  soc: ti: knav_dma: Use IOMEM_ERR_PTR() in pktdma_get_regs()
  soc: ti: knav_dma: Remove dead check on unsigned args.args[0]
  soc: ti: knav_dma: Remove unused DMA_PRIO_MASK macro
  soc: ti: knav_qmss_acc: Fix kernel-doc Return: tag
  soc: ti: knav_qmss: Fix __iomem annotations and __be32 type
  soc: ti: knav_qmss: Use %pe to print PTR_ERR()
  soc: ti: knav_qmss: Fix kernel-doc Return: tags
  soc: ti: knav_qmss: Inline lockdep condition in for_each_handle_rcu
  soc: ti: knav_qmss: Rename global kdev to knav_qdev to fix -Wshadow
  soc: ti: knav_qmss: Remove remaining redundant ENOMEM printks
  soc: ti: knav_qmss_queue: Implement resource cleanup in remove()
  soc: ti: k3-ringacc: Fix access mode for k3_ringacc_ring_pop_tail_io/proxy
  soc: ti: knav_dma: fix all kernel-doc warnings in knav_dma.h
  soc: ti: k3-socinfo: Add support for AM62P variants via NVMEM
  dt-bindings: hwinfo: ti,k3-socinfo: Add nvmem-cells support

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'arm-soc/for-7.2/drivers' of https://github.com/Broadcom/stblinux into soc/drivers 2026-06-09T14:57:56+00:00 Arnd Bergmann arnd@arndb.de 2026-06-09T14:57:55+00:00 41be4c94b00993f702ea8a9bd403798e9366cf30 This pull request contains Broadcom SoC drivers changes for 7.2, please pull the following: - Justin changes the soc_device driver to be more modern and consolidate the initialization - Chen-Yu updates the BCM2835 firmware Kconfig dependency and adds COMPILE_TEST * tag 'arm-soc/for-7.2/drivers' of https://github.com/Broadcom/stblinux: firmware: raspberrypi: Change dependency to ARCH_BCM2835 and COMPILE_TEST soc: brcmstb: consolidate initcall functions Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
This pull request contains Broadcom SoC drivers changes for 7.2, please
pull the following:

- Justin changes the soc_device driver to be more modern and consolidate
  the initialization

- Chen-Yu updates the BCM2835 firmware Kconfig dependency and adds
  COMPILE_TEST

* tag 'arm-soc/for-7.2/drivers' of https://github.com/Broadcom/stblinux:
  firmware: raspberrypi: Change dependency to ARCH_BCM2835 and COMPILE_TEST
  soc: brcmstb: consolidate initcall functions

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'tegra-for-7.2-pmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers 2026-06-09T14:21:04+00:00 Arnd Bergmann arnd@arndb.de 2026-06-09T14:20:55+00:00 c731ec1677815fbdb8727c115ea571b928b2585e soc/tegra: pmc: Changes for v7.2-rc1 The bulk of these changes converts existing users to the modern variants of the API that take a PMC instance as argument. This completes the transition to multi-instance support, which then makes room for cleanups and restricting the remaining legacy APIs to 32-bit platforms. Some changes in this set also clean up powergate debugfs and restrict the power-off handler to be installed only where appropriate. Lastly, support for Tegra238 is added. * tag 'tegra-for-7.2-pmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: pmc: Add Tegra238 support soc/tegra: pmc: Restrict power-off handler to Nexus 7 soc/tegra: pmc: Populate powergate debugfs only when needed soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard soc/tegra: pmc: Remove unused legacy functions soc/tegra: pmc: Create PMC context dynamically usb: xhci: tegra: Explicitly specify PMC instance to use PCI: tegra: Explicitly specify PMC instance to use media: vde: Explicitly specify PMC instance to use drm/tegra: Explicitly specify PMC instance to use drm/nouveau: tegra: Explicitly specify PMC instance to use ata: ahci_tegra: Explicitly specify PMC instance to use Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
soc/tegra: pmc: Changes for v7.2-rc1

The bulk of these changes converts existing users to the modern variants
of the API that take a PMC instance as argument. This completes the
transition to multi-instance support, which then makes room for cleanups
and restricting the remaining legacy APIs to 32-bit platforms.

Some changes in this set also clean up powergate debugfs and restrict
the power-off handler to be installed only where appropriate. Lastly,
support for Tegra238 is added.

* tag 'tegra-for-7.2-pmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Add Tegra238 support
  soc/tegra: pmc: Restrict power-off handler to Nexus 7
  soc/tegra: pmc: Populate powergate debugfs only when needed
  soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
  soc/tegra: pmc: Remove unused legacy functions
  soc/tegra: pmc: Create PMC context dynamically
  usb: xhci: tegra: Explicitly specify PMC instance to use
  PCI: tegra: Explicitly specify PMC instance to use
  media: vde: Explicitly specify PMC instance to use
  drm/tegra: Explicitly specify PMC instance to use
  drm/nouveau: tegra: Explicitly specify PMC instance to use
  ata: ahci_tegra: Explicitly specify PMC instance to use

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'tegra-for-7.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers 2026-06-09T13:27:33+00:00 Arnd Bergmann arnd@arndb.de 2026-06-09T13:27:33+00:00 aa75b5370d8e8b89b14631739c7b722925c704e8 soc/tegra: Changes for v7.2-rc1 These changes update some maintainer contact information, add a modern way of reading the chip information and cleanup/enhance some existing code. * tag 'tegra-for-7.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: Use ARM SMCCC to get chip ID, revision, and platform info soc/tegra: fuse: Register nvmem lookups at probe Documentation: ABI: Take over as contact for sysfs-driver-tegra-fuse MAINTAINERS: Move Peter De Schrijver to CREDITS bus: tegra-aconnect: Use dev_err_probe for probe error paths Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
soc/tegra: Changes for v7.2-rc1

These changes update some maintainer contact information, add a modern
way of reading the chip information and cleanup/enhance some existing
code.

* tag 'tegra-for-7.2-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: Use ARM SMCCC to get chip ID, revision, and platform info
  soc/tegra: fuse: Register nvmem lookups at probe
  Documentation: ABI: Take over as contact for sysfs-driver-tegra-fuse
  MAINTAINERS: Move Peter De Schrijver to CREDITS
  bus: tegra-aconnect: Use dev_err_probe for probe error paths

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge tag 'aspeed-7.2-drivers-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/drivers 2026-06-09T12:05:28+00:00 Krzysztof Kozlowski krzk@kernel.org 2026-06-09T12:05:28+00:00 9f2f61e3363dd76df741f56e9cc36bd68f2402b6 aspeed: First batch of driver changes for v7.2 While bc13f14f5cd3 ("soc: aspeed: cleanup dead default for ASPEED_SOCINFO") was committed just now it has been in -next for a while as b333a0f1c857411d83a02aa6f1d9ecc7666d6179. The commit is fresh as I moved it between branches. Other than that it's just the one other patch from Krzysztof tidying up the location of MODULE_DEVICE_TABLE(). * tag 'aspeed-7.2-drivers-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux: soc: aspeed: cleanup dead default for ASPEED_SOCINFO soc: aspeed: Move MODULE_DEVICE_TABLE next to the table itself Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> 
aspeed: First batch of driver changes for v7.2

While bc13f14f5cd3 ("soc: aspeed: cleanup dead default for
ASPEED_SOCINFO") was committed just now it has been in -next for a while as
b333a0f1c857411d83a02aa6f1d9ecc7666d6179. The commit is fresh as I moved it
between branches.

Other than that it's just the one other patch from Krzysztof tidying up the
location of MODULE_DEVICE_TABLE().

* tag 'aspeed-7.2-drivers-0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
  soc: aspeed: cleanup dead default for ASPEED_SOCINFO
  soc: aspeed: Move MODULE_DEVICE_TABLE next to the table itself

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Merge tag 'sunxi-drivers-for-7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers 2026-06-09T11:38:15+00:00 Krzysztof Kozlowski krzk@kernel.org 2026-06-09T11:38:15+00:00 a68c459ac6469076afbe45697a47b3a7addc1c29 Allwinner driver changes for 7.2 Mostly changes to the SRAM driver to allow for one SRAM region to be "claimed" by multiple changes. When a region is "claimed" it is removed or disconnected from the CPU's view. This is needed on the H6 and H616, which have one alias region seemingly shared between the video codec engine and the display engine. One minor fix for the RSB driver is also included. * tag 'sunxi-drivers-for-7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: bus: sunxi-rsb: Always check register address validity soc: sunxi: sram: Add H616 SRAM regions soc: sunxi: sram: Support claiming multiple regions per device soc: sunxi: sram: Allow SRAM to be claimed multiple times soc: sunxi: sram: Const-ify sunxi_sram_func data and references dt-bindings: sram: sunxi-sram: Add H616 SRAM regions dt-bindings: sram: Document Allwinner H616 VE SRAM Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> 
Allwinner driver changes for 7.2

Mostly changes to the SRAM driver to allow for one SRAM region to be
"claimed" by multiple changes. When a region is "claimed" it is removed
or disconnected from the CPU's view. This is needed on the H6 and H616,
which have one alias region seemingly shared between the video codec
engine and the display engine.

One minor fix for the RSB driver is also included.

* tag 'sunxi-drivers-for-7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  bus: sunxi-rsb: Always check register address validity
  soc: sunxi: sram: Add H616 SRAM regions
  soc: sunxi: sram: Support claiming multiple regions per device
  soc: sunxi: sram: Allow SRAM to be claimed multiple times
  soc: sunxi: sram: Const-ify sunxi_sram_func data and references
  dt-bindings: sram: sunxi-sram: Add H616 SRAM regions
  dt-bindings: sram: Document Allwinner H616 VE SRAM

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>