Pull char/misc and other driver updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem changes
  for 6.8-rc1.

  Other than lots of binder driver changes (as you can see by the merge
  conflicts) included in here are:

   - lots of iio driver updates and additions

   - spmi driver updates

   - eeprom driver updates

   - firmware driver updates

   - ocxl driver updates

   - mhi driver updates

   - w1 driver updates

   - nvmem driver updates

   - coresight driver updates

   - platform driver remove callback api changes

   - tags.sh script updates

   - bus_type constant marking cleanups

   - lots of other small driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits)
  android: removed duplicate linux/errno
  uio: Fix use-after-free in uio_open
  drivers: soc: xilinx: add check for platform
  firmware: xilinx: Export function to use in other module
  scripts/tags.sh: remove find_sources
  scripts/tags.sh: use -n to test archinclude
  scripts/tags.sh: add local annotation
  scripts/tags.sh: use more portable -path instead of -wholename
  scripts/tags.sh: Update comment (addition of gtags)
  firmware: zynqmp: Convert to platform remove callback returning void
  firmware: turris-mox-rwtm: Convert to platform remove callback returning void
  firmware: stratix10-svc: Convert to platform remove callback returning void
  firmware: stratix10-rsu: Convert to platform remove callback returning void
  firmware: raspberrypi: Convert to platform remove callback returning void
  firmware: qemu_fw_cfg: Convert to platform remove callback returning void
  firmware: mtk-adsp-ipc: Convert to platform remove callback returning void
  firmware: imx-dsp: Convert to platform remove callback returning void
  firmware: coreboot_table: Convert to platform remove callback returning void
  firmware: arm_scpi: Convert to platform remove callback returning void
  firmware: arm_scmi: Convert to platform remove callback returning void
  ...

Pull drm updates from Dave Airlie:
 "This contains two major new drivers:

   - imagination is a first driver for Imagination Technologies devices,
     it only covers very specific devices, but there is hope to grow it

   - xe is a reboot of the i915 GPU (shares display) side using a more
     upstream focused development model, and trying to maximise code
     sharing. It's not enabled for any hw by default, and will hopefully
     get switched on for Intel's Lunarlake.

  This also drops a bunch of the old UMS ioctls. It's been dead long
  enough.

  amdgpu has a bunch of new color management code that is being used in
  the Steam Deck.

  amdgpu also has a new ACPI WBRF interaction to help avoid radio
  interference.

  Otherwise it's the usual lots of changes in lots of places.

  Detailed summary:

  new drivers:
   - imagination - new driver for Imagination Technologies GPU
   - xe - new driver for Intel GPUs using core drm concepts

  core:
   - add CLOSE_FB ioctl
   - remove old UMS ioctls
   - increase max objects to accomodate AMD color mgmt

  encoder:
   - create per-encoder debugfs directory

  edid:
   - split out drm_eld
   - SAD helpers
   - drop edid_firmware module parameter

  format-helper:
   - cache format conversion buffers

  sched:
   - move from kthread to workqueue
   - rename some internals
   - implement dynamic job-flow control

  gpuvm:
   - provide more features to handle GEM objects

  client:
   - don't acquire module reference

  displayport:
   - add mst path property documentation

  fdinfo:
   - alignment fix

  dma-buf:
   - add fence timestamp helper
   - add fence deadline support

  bridge:
   - transparent aux-bridge for DP/USB-C
   - lt8912b: add suspend/resume support and power regulator support

  panel:
   - edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
   - chromebook panel support
   - elida-kd35t133: rework pm
   - powkiddy RK2023 panel
   - himax-hx8394: drop prepare/unprepare and shutdown logic
   - BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
   - Evervision VGG644804, SDC ATNA45AF01
   - nv3052c: register docs, init sequence fixes, fascontek FS035VG158
   - st7701: Anbernic RG-ARC support
   - r63353 panel controller
   - Ilitek ILI9805 panel controller
   - AUO G156HAN04.0

  simplefb:
   - support memory regions
   - support power domains

  amdgpu:
   - add new 64-bit sequence number infrastructure
   - add AMD specific color management
   - ACPI WBRF support for RF interference handling
   - GPUVM updates
   - RAS updates
   - DCN 3.5 updates
   - Rework PCIe link speed handling
   - Document GPU reset types
   - DMUB fixes
   - eDP fixes
   - NBIO 7.9/7.11 updates
   - SubVP updates
   - XGMI PCIe state dumping for aqua vanjaram
   - GFX11 golden register updates
   - enable tunnelling on high pri compute

  amdkfd:
   - Migrate TLB flushing logic to amdgpu
   - Trap handler fixes
   - Fix restore workers handling on suspend/resume
   - Fix possible memory leak in pqm_uninit()
   - support import/export of dma-bufs using GEM handles

  radeon:
   - fix possible overflows in command buffer checking
   - check for errors in ring_lock

  i915:
   - reorg display code for reuse in xe driver
   - fdinfo memory stats printing
   - DP MST bandwidth mgmt improvements
   - DP panel replay enabling
   - MTL C20 phy state verification
   - MTL DP DSC fractional bpp support
   - Audio fastset support
   - use dma_fence interfaces instead of i915_sw_fence
   - Separate gem and display code
   - AUX register macro refactoring
   - Separate display module/device parameters
   - Move display capabilities debugfs under display
   - Makefile cleanups
   - Register cleanups
   - Move display lock inits under display/
   - VLV/CHV DPIO PHY register and interface refactoring
   - DSI VBT sequence refactoring
   - C10/C20 PHY PLL hardware readout
   - DPLL code cleanups
   - Cleanup PXP plane protection checks
   - Improve display debug msgs
   - PSR selective fetch fixes/improvements
   - DP MST fixes
   - Xe2LPD FBC restrictions removed
   - DGFX uses direct VBT pin mapping
   - more MTL WAs
   - fix MTL eDP bug
   - eliminate use of kmap_atomic

  habanalabs:
   - sysfs entry to identify a device minor id with debugfs path
   - sysfs entry to expose device module id
   - add signed device info retrieval through INFO ioctl
   - add Gaudi2C device support
   - pcie reset prepare/done hooks

  msm:
   - Add support for SDM670, SM8650
   - Handle the CFG interconnect to fix the obscure hangs / timeouts
   - Kconfig fix for QMP dependency
   - use managed allocators
   - DPU: SDM670, SM8650 support
   - DPU: Enable SmartDMA on SM8350 and SM8450
   - DP: enable runtime PM support
   - GPU: add metadata UAPI
   - GPU: move devcoredumps to GPU device
   - GPU: convert to drm_exec

  ivpu:
   - update FW API
   - new debugfs file
   - a new NOP job submission test mode
   - improve suspend/resume
   - PM improvements
   - MMU PT optimizations
   - firmware profile frequency support
   - support for uncached buffers
   - switch to gem shmem helpers
   - replace kthread with threaded irqs

  rockchip:
   - rk3066_hdmi: convert to atomic
   - vop2: support nv20 and nv30
   - rk3588 support

  mediatek:
   - use devm_platform_ioremap_resource
   - stop using iommu_present
   - MT8188 VDOSYS1 display support

  panfrost:
   - PM improvements
   - improve interrupt handling as poweroff

  qaic:
   - allow to run with single MSI
   - support host/device time sync
   - switch to persistent DRM devices

  exynos:
   - fix potential error pointer dereference
   - fix wrong error checking
   - add missing call to drm_atomic_helper_shutdown

  omapdrm:
   - dma-fence lockdep annotation fix

  tidss:
   - dma-fence lockdep annotation fix
   - support for AM62A7

  v3d:
   - BCM2712 - rpi5 support
   - fdinfo + gputop support
   - uapi for CPU job handling

  virtio-gpu:
   - add context debug name"

* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
  drm/amd/display: Allow z8/z10 from driver
  drm/amd/display: fix bandwidth validation failure on DCN 2.1
  drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
  drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
  drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
  Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
  drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
  drm/amd/display: Fix power_helpers.c codestyle
  drm/amd/display: Fix hdcp_log.h codestyle
  drm/amd/display: Fix hdcp2_execution.c codestyle
  drm/amd/display: Fix hdcp_psp.h codestyle
  drm/amd/display: Fix freesync.c codestyle
  drm/amd/display: Fix hdcp_psp.c codestyle
  drm/amd/display: Fix hdcp1_execution.c codestyle
  drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
  drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
  drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
  drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
  drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
  drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
  ...

Pull ARM SoC code updates from Arnd Bergmann:
 "There are two notable changes this time:

   - add a arch/arm/Kconfig.platforms file to simplify the platforms
     that have no code except their Kconfig file (Andrew Davis)

   - remove support for the ARM11MPCore CPU in the versatile/realview
     platform. Since this is the last remaining one after removing
     ox820, some core code can go as well (Linus Walleij)

  The other changes are minor cleanups and bugfixes"

* tag 'soc-arm-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: davinci: always select CONFIG_CPU_ARM926T
  soc: pxa: ssp: fix casts
  ARM: debug: fix DEBUG_UNCOMPRESS help for !MULTIPLATFORM
  ARM: MAINTAINERS: drop empty entries for removed boards
  ARM: Delete ARM11MPCore perf leftovers
  ARM: mach-nspire: Rework support and directory structure
  ARM: mach-sunplus: Rework support and directory structure
  ARM: mach-airoha: Rework support and directory structure
  ARM: mach-moxart: Move MOXA ART support into Kconfig.platforms
  ARM: mach-uniphier: Move Socionext UniPhier support into Kconfig.platforms
  ARM: mach-rda: Move RDA Micro support into Kconfig.platforms
  ARM: mach-asm9260: Move ASM9260 support into Kconfig.platforms
  ARM: Kconfig: move platform selection into its own Kconfig file
  ARM: Delete ARM11MPCore (ARM11 ARMv6K SMP) support
  MAINTAINERS: add Marvell MBus driver to Marvell EBU SoCs support
  ARM: mxs: Do not search for "fsl,clkctrl"
  ARM: imx: Use device_get_match_data()
  MAINTAINERS: add omap bus drivers to OMAP2+ SUPPORT
  ARM: at91: pm: set soc_pm.data.mode in at91_pm_secure_init()

On ARM64 platforms, id->data is a 64-bit value and casting it to a
32-bit integer causes build errors. Cast it to uintptr_t instead.

The id->driver_data cast is unnecessary, so drop it.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240106-pxa-ssp-v2-1-69ac9f028bba@skole.hr
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Some error event IDs for Versal and Versal NET are different.
Both the platforms should access their respective error event
IDs so use sub_family_code to check for platform and check
error IDs for respective platforms. The family code is passed
via platform data to avoid platform detection again.
Platform data is setup when even driver is registered.

Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Link: https://lore.kernel.org/r/20231219055025.27570-3-jay.buddhabhatti@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V cache drivers for v6.8

The SiFive composable cache driver moves to the cache driver
subdirectory from the drivers/soc and grows support for non-coherent
cache operations. The immediate user for these is the jh7100 SoC, that
a rake of people have on VisionFive v1 or Beagle-V Starlight boards.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-cache-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  riscv: errata: Make ERRATA_STARFIVE_JH7100 depend on !DMA_DIRECT_REMAP
  riscv: errata: Add StarFive JH7100 errata
  soc: sifive: ccache: Add StarFive JH7100 support
  dt-bindings: cache: sifive,ccache0: Add StarFive JH7100 compatible
  soc: sifive: shunt ccache driver to drivers/cache

Link: https://lore.kernel.org/r/20231221-catatonic-monday-d4c61283b136@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

RISC-V SoC drivers for v6.8

There's only one set of changes here, the addition of "Auto Update"
support for PolarFire SoC. Auto Update is one of the ways that the FPGA
bitstream can be updated, and the only one suitable for use from Linux
as it does not immediately initiate a reboot when started.
The driver was not accepted in the FPGA manager subsystem as the update
only occurs after a reboot and makes no use of the FPGA manager
framework.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

* tag 'riscv-soc-drivers-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
  MAINTAINERS: add auto-update driver to mpfs entry
  firmware: microchip: Replace of_device.h with explicit include
  firmware: microchip: add PolarFire SoC Auto Update support
  soc: microchip: mpfs: add auto-update subdev to system controller
  soc: microchip: mpfs: print service status in warning message
  soc: microchip: mpfs: enable access to the system controller's flash
  dt-bindings: soc: microchip: add a property for system controller flash
  firmware_loader: Expand Firmware upload error codes with firmware invalid error

Link: https://lore.kernel.org/r/20231221-droop-unblock-81e4fe14acee@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Samsung SoC driver changes for v6.8

1. Add support for Google GS101 SoC to different drivers: clock
   controller, serial and watchdog.

   The clock driver changes depend on few bindings headers, which I put
   in a topic branch with the bindings refactoring and GS101 support,
   therefore this this pull request includes that bindings topic branch.

   The rest of the bindings topic branch is not necessary here, however
   keeping everything together makes it easier to share between
   branches.  The bindings topic branch is mostly refactoring all the
   compatibles to add SoC-specific compatible followed by fallback.

2. Exynos ChipID: recognize ExynosAutov920.

* tag 'samsung-drivers-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (40 commits)
  dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
  watchdog: s3c2410_wdt: Add support for Google gs101 SoC
  watchdog: s3c2410_wdt: Update QUIRK macros to use BIT macro
  watchdog: s3c2410_wdt: Add support for WTCON register DBGACK_MASK bit
  tty: serial: samsung: Add gs101 compatible and common fifoszdt_serial_drv_data
  clk: samsung: clk-gs101: Add cmu_top, cmu_misc and cmu_apm support
  clk: samsung: clk-pll: Add support for pll_{0516,0517,518}
  dt-bindings: clock: google,gs101: fix incorrect numbering and DGB suffix
  dt-bindings: soc: samsung: usi: add google,gs101-usi compatible
  dt-bindings: serial: samsung: Make samsung,uart-fifosize a required property
  dt-bindings: serial: samsung: Add google-gs101-uart compatible
  dt-bindings: watchdog: Document Google gs101 watchdog bindings
  dt-bindings: samsung: exynos-sysreg: combine exynosautov920 with other enum
  dt-bindings: soc: google: exynos-sysreg: add dedicated SYSREG compatibles to GS101
  dt-bindings: clock: Add Google gs101 clock management unit bindings
  dt-bindings: soc: samsung: exynos-pmu: Add gs101 compatible
  dt-bindings: watchdog: samsung: add specific compatible for Tesla FSD
  dt-bindings: samsung: exynos-pmu: add specific compatible for Tesla FSD
  dt-bindings: serial: samsung: add specific compatible for Tesla FSD
  dt-bindings: pwm: samsung: add specific compatible for Tesla FSD
  ...

Link: https://lore.kernel.org/r/20231220084722.22149-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Qualcomm driver updates for v6.8

Support for SM8650 and X1E is added to the LLCC driver, the
LLCC_TRP_ATTR2_CFGn register stride is corrected, and a bug where for
each iteration looping over slices previous settings for dis_cap_alloc
and retain_on_pc are overwritten.

A quirk is introduced in UCSI, for implementations that does not handle
UCSI_GET_PDOS for non-PD partners. With this, USCI support is enabled by
default in pmic_glink. It is later reverted for SC8280XP due reported
errors.

A few memory leaks in error paths of qseecom are taken care of.

A small driver to expose the ADSP PDCharger ULOG debug log is
introduced, to aid debugging issues with pmic_glink.

The identiy of SM8650, PM8937 and a few DSPs are added to the Qualcomm
socinfo driver.

The Qualcomm sleep stats driver is extended to allow getting detailed
statistics about usage of various DDR states. Unfortunately this ABI
does not seem to be stable across platforms, so this addition is dropped
again while the reported problems are investigated further.

Andy is moved from MAINTAINERS to CREDITS. Thank you, Andy.

* tag 'qcom-drivers-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (34 commits)
  soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
  firmware: qcom: qseecom: fix memory leaks in error paths
  soc: qcom: llcc: Fix typo in kernel-doc
  dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
  MAINTAINERS: qcom: move Andy Gross to credits
  soc: qcom: pmic_glink: drop stray semicolons
  soc: qcom: pmic_glink: disable UCSI on sc8280xp
  soc: qcom: llcc: Fix dis_cap_alloc and retain_on_pc configuration
  soc: qcom: pmic_pdcharger_ulog: Fix hypothetical ulog request message endianess
  soc: qcom: pmic_pdcharger_ulog: Move TRACE_SYSTEM out of #if protection
  soc: qcom: pmic_pdcharger_ulog: Search current directory for headers
  soc: qcom: socinfo: Add few DSPs to get their image details
  soc: qcom: llcc: Add missing description for members in slice config
  Revert "soc: qcom: stats: Add DDR sleep stats"
  dt-bindings: firmware: qcom,scm: Allow interconnect for everyone
  dt-bindings: firmware: qcom,scm: document SCM on X1E80100 SoCs
  soc: qcom: socinfo: Add PM8937 Power IC
  soc: qcom: llcc: Add configuration data for X1E80100
  dt-bindings: cache: qcom,llcc: Add X1E80100 compatible
  soc: qcom: pmic_glink_altmode: fix port sanity check
  ...

Link: https://lore.kernel.org/r/20231219041855.732578-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

TI SoC driver updates for v6.8

- ti_sci: Minor fixup for off by one error in debugfs_create
- k3-socinfo: Refactoring and add j721e detection, j722s

* tag 'ti-driver-soc-for-v6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  soc: ti: k3-socinfo: Add JTAG ID for J722S
  soc: ti: k3-socinfo: Revamp driver to accommodate different rev structs
  firmware: ti_sci: Fix an off-by-one in ti_sci_debugfs_create()

Link: https://lore.kernel.org/r/20231218153043.r5psxbjjpccusjg4@september
Signed-off-by: Arnd Bergmann <arnd@arndb.de>