There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Pull remoteproc updates from Bjorn Andersson:
 "This introduces device managed versions of functions used to register
  remoteproc devices, add support for remoteproc driver specific
  resource control, enables remoteproc drivers to specify ELF class and
  machine for coredumps. It integrates pm_runtime in the core for
  keeping resources active while the remote is booted and holds a wake
  source while recoverying a remote processor after a firmware crash.

  It refactors the remoteproc device's allocation path to simplify the
  logic, fix a few cleanup bugs and to not clone const strings onto the
  heap. Debugfs code is simplifies using the DEFINE_SHOW_ATTRIBUTE and a
  zero-length array is replaced with flexible-array.

  A new remoteproc driver for the JZ47xx VPU is introduced, the Qualcomm
  SM8250 gains support for audio, compute and sensor remoteprocs and the
  Qualcomm SC7180 modem support is cleaned up and improved.

  The Qualcomm glink subsystem-restart driver is merged into the main
  glink driver, the Qualcomm sysmon driver is extended to properly
  notify remote processors about all other remote processors' state
  transitions"

* tag 'rproc-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (43 commits)
  remoteproc: Fix an error code in devm_rproc_alloc()
  MAINTAINERS: Add myself as reviewer for Ingenic rproc driver
  remoteproc: ingenic: Added remoteproc driver
  remoteproc: Add support for runtime PM
  dt-bindings: Document JZ47xx VPU auxiliary processor
  remoteproc: wcss: Fix arguments passed to qcom_add_glink_subdev()
  remoteproc: Fix and restore the parenting hierarchy for vdev
  remoteproc: Fall back to using parent memory pool if no dedicated available
  remoteproc: Replace zero-length array with flexible-array
  remoteproc: wcss: add support for rpmsg communication
  remoteproc: core: Prevent system suspend during remoteproc recovery
  remoteproc: qcom_q6v5_mss: Remove unused q6v5_da_to_va function
  remoteproc: qcom_q6v5_mss: map/unmap mpss segments before/after use
  remoteproc: qcom_q6v5_mss: Drop accesses to MPSS PERPH register space
  dt-bindings: remoteproc: qcom: Replace halt-nav with spare-regs
  remoteproc: qcom: pas: Add SM8250 PAS remoteprocs
  dt-bindings: remoteproc: qcom: pas: Add SM8250 remoteprocs
  remoteproc: qcom_q6v5_mss: Extract mba/mpss from memory-region
  dt-bindings: remoteproc: qcom: Use memory-region to reference memory
  remoteproc: qcom: pas: Add SC7180 Modem support
  ...

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char/misc driver patches for 5.8-rc1

  Included in here are:

   - habanalabs driver updates, loads

   - mhi bus driver updates

   - extcon driver updates

   - clk driver updates (approved by the clock maintainer)

   - firmware driver updates

   - fpga driver updates

   - gnss driver updates

   - coresight driver updates

   - interconnect driver updates

   - parport driver updates (it's still alive!)

   - nvmem driver updates

   - soundwire driver updates

   - visorbus driver updates

   - w1 driver updates

   - various misc driver updates

  In short, loads of different driver subsystem updates along with the
  drivers as well.

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (233 commits)
  habanalabs: correctly cast u64 to void*
  habanalabs: initialize variable to default value
  extcon: arizona: Fix runtime PM imbalance on error
  extcon: max14577: Add proper dt-compatible strings
  extcon: adc-jack: Fix an error handling path in 'adc_jack_probe()'
  extcon: remove redundant assignment to variable idx
  w1: omap-hdq: print dev_err if irq flags are not cleared
  w1: omap-hdq: fix interrupt handling which did show spurious timeouts
  w1: omap-hdq: fix return value to be -1 if there is a timeout
  w1: omap-hdq: cleanup to add missing newline for some dev_dbg
  /dev/mem: Revoke mappings when a driver claims the region
  misc: xilinx-sdfec: convert get_user_pages() --> pin_user_pages()
  misc: xilinx-sdfec: cleanup return value in xsdfec_table_write()
  misc: xilinx-sdfec: improve get_user_pages_fast() error handling
  nvmem: qfprom: remove incorrect write support
  habanalabs: handle MMU cache invalidation timeout
  habanalabs: don't allow hard reset with open processes
  habanalabs: GAUDI does not support soft-reset
  habanalabs: add print for soft reset due to event
  habanalabs: improve MMU cache invalidation code
  ...

Pull RISC-V updates from Palmer Dabbelt:

 - The remainder of the code necessary to support the Kendryte K210:

     * Support for building device trees into the kernel, as the K210
       doesn't have a bootloader that provides one

     * A K210 device tree and the associated defconfig update

     * Support for skipping PMP initialization on systems that trap on
       PMP accesses rather than treating them as WARL

 - Support for KGDB

 - Improvements to text patching

 - Some cleanups to the SiFive L2 cache driver

* tag 'riscv-for-linus-5.8-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  soc: sifive: l2 cache: Mark l2_get_priv_group as static
  soc: sifive: l2 cache: Eliminate an unsigned zero compare warning
  riscv: Add support to determine no. of L2 cache way enabled
  riscv: cacheinfo: Implement cache_get_priv_group with a generic ops structure
  riscv: Use text_mutex instead of patch_lock
  riscv: Use NOKPROBE_SYMBOL() instead of __krpobes annotation
  riscv: Remove the 'riscv_' prefix of function name
  riscv: Add SW single-step support for KDB
  riscv: Use the XML target descriptions to report 3 system registers
  riscv: Add KGDB support
  kgdb: Add kgdb_has_hit_break function
  RISC-V: Skip setting up PMPs on traps
  riscv: K210: Update defconfig
  riscv: K210: Add a built-in device tree
  riscv: Allow device trees to be built into the kernel

Pull ARM/SoC driver updates from Arnd Bergmann:
 "These are updates to SoC specific drivers that did not have another
  subsystem maintainer tree to go through for some reason:

   - Some bus and memory drivers for the MIPS P5600 based Baikal-T1 SoC
     that is getting added through the MIPS tree.

   - There are new soc_device identification drivers for TI K3, Qualcomm
     MSM8939

   - New reset controller drivers for NXP i.MX8MP, Renesas RZ/G1H, and
     Hisilicon hi6220

   - The SCMI firmware interface can now work across ARM SMC/HVC as a
     transport.

   - Mediatek platforms now use a new driver for their "MMSYS" hardware
     block that controls clocks and some other aspects in behalf of the
     media and gpu drivers.

   - Some Tegra processors have improved power management support,
     including getting woken up by the PMIC and cluster power down
     during idle.

   - A new v4l staging driver for Tegra is added.

   - Cleanups and minor bugfixes for TI, NXP, Hisilicon, Mediatek, and
     Tegra"

* tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (155 commits)
  clk: sprd: fix compile-testing
  bus: bt1-axi: Build the driver into the kernel
  bus: bt1-apb: Build the driver into the kernel
  bus: bt1-axi: Use sysfs_streq instead of strncmp
  bus: bt1-axi: Optimize the return points in the driver
  bus: bt1-apb: Use sysfs_streq instead of strncmp
  bus: bt1-apb: Use PTR_ERR_OR_ZERO to return from request-regs method
  bus: bt1-apb: Fix show/store callback identations
  bus: bt1-apb: Include linux/io.h
  dt-bindings: memory: Add Baikal-T1 L2-cache Control Block binding
  memory: Add Baikal-T1 L2-cache Control Block driver
  bus: Add Baikal-T1 APB-bus driver
  bus: Add Baikal-T1 AXI-bus driver
  dt-bindings: bus: Add Baikal-T1 APB-bus binding
  dt-bindings: bus: Add Baikal-T1 AXI-bus binding
  staging: tegra-video: fix V4L2 dependency
  tee: fix crypto select
  drivers: soc: ti: knav_qmss_queue: Make knav_gp_range_ops static
  soc: ti: add k3 platforms chipid module driver
  dt-bindings: soc: ti: add binding for k3 platforms chipid module
  ...

Pull ARM SoC updates from Arnd Bergmann:
 "One new platform gets added, the Realtek RTD1195, which is an older
  Cortex-a7 based relative of the RTD12xx chips that are already
  supported in arch/arm64. The platform may also be extended to support
  running 32-bit kernels on those 64-bit chips for memory-constrained
  machines.

  In the Renesas shmobile platform, we gain support for "RZ/G1H" or
  R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores,
  originally released in 2016 as one of the last high-end 32-bit
  designs.

  There is ongoing cleanup for the integrator, tegra, imx, and omap2
  platforms, with integrator getting very close to the goal of having
  zero code in arch/arm/, and omap2 moving more of the chip specifics
  from old board code into device tree files.

  The Versatile Express platform is made more modular, with built-in
  drivers now becoming loadable modules. This is part of a greater
  effort for the Android OS to have a common kernel binary for all
  platforms and any platform specific code in loadable modules.

  The PXA platform drops support for Compulab's pxa2xx boards that had
  rather unusual flash and PCI drivers but no known users remaining. All
  device drivers specific to those boards can now get removed as well.

  Across platforms, there is ongoing cleanup, with Geert and Rob
  revisiting some a lot of Kconfig options"

* tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
  ARM: omap2: fix omap5_realtime_timer_init definition
  ARM: zynq: Don't select CONFIG_ICST
  ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs
  clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE
  ARM: davinci: fix build failure without I2C
  power: reset: vexpress: fix build issue
  power: vexpress: cleanup: use builtin_platform_driver
  power: vexpress: add suppress_bind_attrs to true
  Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG"
  MAINTAINERS: pxa: remove Compulab arm/pxa support
  ARM: pxa: remove Compulab pxa2xx boards
  bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe()
  soc: imx: move cpu code to drivers/soc/imx
  ARM: imx: move cpu definitions into a header
  ARM: imx: use device_initcall for imx_soc_device_init
  ARM: imx: pcm037: make pcm970_sja1000_platform_data static
  bus: ti-sysc: Timers no longer need legacy quirk handling
  ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter
  ARM: dts: Configure system timers for omap2
  ARM: dts: Configure system timers for ti81xx
  ...

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

Pull power management updates from Rafael Wysocki:
 "These rework the system-wide PM driver flags, make runtime switching
  of cpuidle governors easier, improve the user space hibernation
  interface code, add intel-speed-select interface documentation, add
  more debug messages to the ACPI code handling suspend to idle, update
  the cpufreq core and drivers, fix a minor issue in the cpuidle core
  and update two cpuidle drivers, improve the PM-runtime framework,
  update the Intel RAPL power capping driver, update devfreq core and
  drivers, and clean up the cpupower utility.

  Specifics:

   - Rework the system-wide PM driver flags to make them easier to
     understand and use and update their documentation (Rafael Wysocki,
     Alan Stern).

   - Allow cpuidle governors to be switched at run time regardless of
     the kernel configuration and update the related documentation
     accordingly (Hanjun Guo).

   - Improve the resume device handling in the user space hibernarion
     interface code (Domenico Andreoli).

   - Document the intel-speed-select sysfs interface (Srinivas
     Pandruvada).

   - Make the ACPI code handing suspend to idle print more debug
     messages to help diagnose issues with it (Rafael Wysocki).

   - Fix a helper routine in the cpufreq core and correct a typo in the
     struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
     Wenhu).

   - Update cpufreq drivers:

      - Make the intel_pstate driver start in the passive mode by
        default on systems without HWP (Rafael Wysocki).

      - Add i.MX7ULP support to the imx-cpufreq-dt driver and add
        i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).

      - Convert the qoriq cpufreq driver to a platform one, make the
        platform code create a suitable device object for it and add
        platform dependencies to it (Mian Yousaf Kaukab, Geert
        Uytterhoeven).

      - Fix wrong compatible binding in the qcom driver (Ansuel Smith).

      - Build the omap driver by default for ARCH_OMAP2PLUS (Anders
        Roxell).

      - Add r8a7742 SoC support to the dt cpufreq driver (Lad
        Prabhakar).

   - Update cpuidle core and drivers:

      - Fix three reference count leaks in error code paths in the
        cpuidle core (Qiushi Wu).

      - Convert Qualcomm SPM to a generic cpuidle driver (Stephan
        Gerhold).

      - Fix up the execution order when entering a domain idle state in
        the PSCI driver (Ulf Hansson).

   - Fix a reference counting issue related to clock management and
     clean up two oddities in the PM-runtime framework (Rafael Wysocki,
     Andy Shevchenko).

   - Add ElkhartLake support to the Intel RAPL power capping driver and
     remove an unused local MSR definition from it (Jacob Pan, Sumeet
     Pawnikar).

   - Update devfreq core and drivers:

      - Replace strncpy() with strscpy() in the devfreq core and use
        lockdep asserts instead of manual checks for a locked mutex in
        it (Dmitry Osipenko, Krzysztof Kozlowski).

      - Add a generic imx bus scaling driver and make it register an
        interconnect device (Leonard Crestez, Gustavo A. R. Silva).

      - Make the cpufreq notifier in the tegra30 driver take boosting
        into account and delete an unuseful error message from that
        driver (Dmitry Osipenko, Markus Elfring).

   - Remove unneeded semicolon from the cpupower code (Zou Wei)"

* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
  cpuidle: Fix three reference count leaks
  PM: runtime: Replace pm_runtime_callbacks_present()
  PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
  PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
  PM / devfreq: Replace strncpy with strscpy
  PM / devfreq: imx: Register interconnect device
  PM / devfreq: Add generic imx bus scaling driver
  PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
  PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
  PM: hibernate: Restrict writes to the resume device
  PM: runtime: clk: Fix clk_pm_runtime_get() error path
  cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
  ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
  ACPI: PM: s2idle: Print type of wakeup debug messages
  powercap: RAPL: remove unused local MSR define
  PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
  Documentation: admin-guide: pm: Document intel-speed-select
  PM: hibernate: Split off snapshot dev option
  PM: hibernate: Incorporate concurrency handling
  Documentation: ABI: make current_governer_ro as a candidate for removal
  ...

xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.

The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.

Signed-off-by: David S. Miller <davem@davemloft.net>