Pull exit cleanups from Eric Biederman: "While looking at some issues related to the exit path in the kernel I found several instances where the code is not using the existing abstractions properly. This set of changes introduces force_fatal_sig a way of sending a signal and not allowing it to be caught, and corrects the misuse of the existing abstractions that I found. A lot of the misuse of the existing abstractions are silly things such as doing something after calling a no return function, rolling BUG by hand, doing more work than necessary to terminate a kernel thread, or calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL). In the review a deficiency in force_fatal_sig and force_sig_seccomp where ptrace or sigaction could prevent the delivery of the signal was found. I have added a change that adds SA_IMMUTABLE to change that makes it impossible to interrupt the delivery of those signals, and allows backporting to fix force_sig_seccomp And Arnd found an issue where a function passed to kthread_run had the wrong prototype, and after my cleanup was failing to build." * 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits) soc: ti: fix wkup_m3_rproc_boot_thread return type signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV) exit/r8188eu: Replace the macro thread_exit with a simple return 0 exit/rtl8712: Replace the macro thread_exit with a simple return 0 exit/rtl8723bs: Replace the macro thread_exit with a simple return 0 signal/x86: In emulate_vsyscall force a signal instead of calling do_exit signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails exit/syscall_user_dispatch: Send ordinary signals on failure signal: Implement force_fatal_sig exit/kthread: Have kernel threads return instead of calling do_exit signal/s390: Use force_sigsegv in default_trap_handler signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved. signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON signal/sparc: In setup_tsb_params convert open coded BUG into BUG signal/powerpc: On swapcontext failure force SIGSEGV signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL) signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT signal/sparc32: Remove unreachable do_exit in do_sparc_fault ...
Pull ARM SoC fixes from Arnd Bergmann: "This is one set of fixes for the NXP/FSL DPAA2 drivers, addressing a few minor issues. I received these just after sending out the last v5.15 fixes, and nothing in here seemed urgent enough for a quick follow-up" * tag 'arm-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: fsl: dpaa2-console: free buffer before returning from dpaa2_console_read soc: fsl: dpio: use the combined functions to protect critical zone soc: fsl: dpio: replace smp_processor_id with raw_smp_processor_id
The wkup_m3_rproc_boot_thread() function uses a nonstandard prototype,
which broke after Eric's recent cleanup:
drivers/soc/ti/wkup_m3_ipc.c: In function 'wkup_m3_rproc_boot_thread':
drivers/soc/ti/wkup_m3_ipc.c:429:16: error: 'return' with a value, in function returning void [-Werror=return-type]
429 | return 0;
| ^
drivers/soc/ti/wkup_m3_ipc.c:416:13: note: declared here
416 | static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Change it to the normal prototype as it should have been from the
start.
Fixes: 111e70490d2a ("exit/kthread: Have kernel threads return instead of calling do_exit")
Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20211105075119.2327190-1-arnd@kernel.org
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Pull sound updates from Takashi Iwai:
"Lots of code development have been see in ASoC side as usual, while
the continued development on memalloc helper and USB-audio low-
latency support are found in the rest.
Note that a few changes in the unusual places like arch/sh are
included, which are a part of ASoC DAI format cleanups.
ALSA core:
- Continued memalloc helper updates and cleanups, now supporting
non-coherent and non-contiguous pages
- Fixes for races in mixer OSS layer
ASoC:
- A new version of the audio graph card which supports a wider range
of systems
- Several conversions to YAML DT bindings
- Continuing cleanups to the SOF and Intel code
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs
- An overhaul of the cs42l42 driver, correcting many problems
- DAI format terminology conversions over many drivers for cleanups
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
USB-audio:
- Continued improvements on low-latency playback
- Quirks for Pioneer devices, Line6 HX-Stomp XL, Audient iD14
HD-audio:
- Reduce excessive udelay() calls on Intel platforms; this should
reduce the CPU load with PulseAudio
- Quirks for HP and Clevo laptops
FireWire:
- Support for meter information on MOTU"
* tag 'sound-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (513 commits)
ALSA: usb-audio: Add quirk for Audient iD14
ALSA: hda/realtek: Add quirk for Clevo PC70HS
ALSA: usb-audio: Line6 HX-Stomp XL USB_ID for 48k-fixed quirk
ALSA: usb-audio: Add registration quirk for JBL Quantum 400
ASoC: rsnd: Fix an error handling path in 'rsnd_node_count()'
ASoC: tlv320aic3x: Make aic3x_remove() return void
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: mediatek: mt8195: add mt8195-mt6359-rt1011-rt5682 bindings document
ASoC: mediatek: mt8195: add machine driver with mt6359, rt1011 and rt5682
ASoC: Stop dummy from overriding hwparams
ASoC: topology: Change topology device to card device
ASoC: topology: Use correct device for prints
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Add header payload_size verification
ASoC: core: Remove invalid snd_soc_component_set_jack call
...
In 2009 Oleg reworked[1] the kernel threads so that it is not
necessary to call do_exit if you are not using kthread_stop(). Remove
the explicit calls of do_exit and complete_and_exit (with a NULL
completion) that were previously necessary.
[1] 63706172f332 ("kthreads: rework kthread_stop()")
Link: https://lkml.kernel.org/r/20211020174406.17889-12-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
NXP/FSL SoC driver fixes for v5.15 DPAA2 DPIO driver - replace smp_processor_id with raw_smp_processor_id to fix preempt debug BUG - use the combined functions to protect critical zone to fix deadlock DPAA2 console - free buffer before returning from dpaa2_console_read * tag 'soc-fsl-fix-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux: soc: fsl: dpaa2-console: free buffer before returning from dpaa2_console_read soc: fsl: dpio: use the combined functions to protect critical zone soc: fsl: dpio: replace smp_processor_id with raw_smp_processor_id Link: https://lore.kernel.org/r/20211026235744.19258-1-leoyang.li@nxp.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM_QCOM_SPM_CPUIDLE can be selected when compile-testing on
other architectures, but this causes a Kconfig warning
for QCOM_SPM:
WARNING: unmet direct dependencies detected for QCOM_SPM
Depends on [n]: ARCH_QCOM [=n]
Selected by [y]:
- ARM_QCOM_SPM_CPUIDLE [=y] && CPU_IDLE [=y] && (ARM [=y] || ARM64) && (ARCH_QCOM [=n] || COMPILE_TEST [=y]) && !ARM64 && MMU [=y]
Make it possible to also compile-test this one, which can
be done now that v5.15-rc5 lets you select QCOM_SCM everywhere.
Fixes: a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver")
Fixes: 498ba2a8a275 ("cpuidle: Fix ARM_QCOM_SPM_CPUIDLE configuration")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Qualcomm driver updates for v5.16 This introduces the Qualcomm "sleep stats" driver, which aids the efforts of bringing various Qualcomm platforms into low power mode. The SMP2P driver gains support for negotiating the "SSR" feature, which is used to better synchronize some corner cases that might appear as the remoteproc is recovering from a crash. The socinfo driver learns about a few new PMICs. SMEM is updated so that it's possible to put the compatible property directly in the reserved-memory node, to avoid having to have a separate node just pointing to the memory-region. Lastly it fixes some bugs in smp2p, apr, rpmhpd drivers, notably avoiding the issue where powering on a power-domain using rpmhpd while keeping the performance_state at 0 is a nop * tag 'qcom-drivers-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: firmware: qcom: scm: Don't break compile test on non-ARM platforms soc: qcom: smp2p: Add of_node_put() before goto soc: qcom: apr: Add of_node_put() before return soc: qcom: qcom_stats: Fix client votes offset soc: qcom: rpmhpd: fix sm8350_mxc's peer domain dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226 firmware: qcom: scm: Add support for MC boot address API soc: qcom: spm: Add 8916 SPM register data dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu soc: qcom: socinfo: Add PM8150C and SMB2351 models firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available() soc: qcom: smp2p: add feature negotiation and ssr ack feature support soc: qcom: Add Sleep stats driver dt-bindings: Introduce QCOM Sleep stats bindings soc: qcom: socinfo: add two missing PMIC IDs soc: qcom: rpmhpd: Make power_on actually enable the domain soc: qcom: smem: Support reserved-memory description dt-bindings: soc: smem: Make indirection optional dt-bindings: sram: Document qcom,rpm-msg-ram Link: https://lore.kernel.org/r/20211026140706.1205989-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung SoC drivers changes for v5.16 1. Convert Exynos ChipID and ASV driver to a module and make it a default, instead of selected. The driver is not essential, so it could be disabled, if needed. 2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV driver. 3. Get rid of HAVE_S3C_RTC because it was adding just another layer instead of direct dependencies. 4. Minor cleanups. * tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: soc: samsung: exynos-chipid: add exynosautov9 SoC support rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies soc: samsung: exynos-chipid: Add Exynos850 support dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible soc: samsung: exynos-chipid: Pass revision reg offsets soc: samsung: pm_domains: drop unused is_off field arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID soc: samsung: exynos-chipid: do not enforce built-in soc: samsung: exynos-chipid: convert to a module soc: samsung: exynos-chipid: avoid soc_device_to_device() soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>