Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs, these contain various things that touch
  the drivers/ directory but got merged through arm-soc for practical
  reasons:

   - Rockchip rk3368 gains power domain support
   - Small updates for the ARM spmi driver
   - The Atmel PMC driver saw a larger rework, touching both
     arch/arm/mach-at91 and drivers/clk/at91
   - All reset controller driver changes alway get merged through
     arm-soc, though this time the largest change is the addition of a
     MIPS pistachio reset driver
   - One bugfix for the NXP (formerly Freescale) i.MX weim bus driver"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  bus: imx-weim: Take the 'status' property value into account
  clk: at91: remove useless includes
  clk: at91: pmc: remove useless capacities handling
  clk: at91: pmc: drop at91_pmc_base
  usb: gadget: atmel: access the PMC using regmap
  ARM: at91: remove useless includes and function prototypes
  ARM: at91: pm: move idle functions to pm.c
  ARM: at91: pm: find and remap the pmc
  ARM: at91: pm: simply call at91_pm_init
  clk: at91: pmc: move pmc structures to C file
  clk: at91: pmc: merge at91_pmc_init in atmel_pmc_probe
  clk: at91: remove IRQ handling and use polling
  clk: at91: make use of syscon/regmap internally
  clk: at91: make use of syscon to share PMC registers in several drivers
  hwmon: (scpi) add energy meter support
  firmware: arm_scpi: add support for 64-bit sensor values
  firmware: arm_scpi: decrease Tx timeout to 20ms
  firmware: arm_scpi: fix send_message and sensor_get_value for big-endian
  reset: sti: Make reset_control_ops const
  reset: zynq: Make reset_control_ops const
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "Newly added support for additional SoCs:
   - Axis Artpec-6 SoC family
   - Allwinner A83T SoC
   - Mediatek MT7623
   - NXP i.MX6QP SoC
   - ST Microelectronics stm32f469 microcontroller

  New features:
   - SMP support for Mediatek mt2701
   - Big-endian support for NXP i.MX
   - DaVinci now uses the new DMA engine dma_slave_map
   - OMAP now uses the new DMA engine dma_slave_map
   - earlyprintk support for palmchip uart on mach-tango
   - delay timer support for orion

  Other:
   - Exynos PMU driver moved out to drivers/soc/
   - Various smaller updates for Renesas, Xilinx, PXA, AT91, OMAP,
     uniphier"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: uniphier: rework SMP code to support new System Bus binding
  ARM: uniphier: add missing of_node_put()
  ARM: at91: avoid defining CONFIG_* symbols in source code
  ARM: DRA7: hwmod: Add data for eDMA tpcc, tptc0, tptc1
  ARM: imx: Make reset_control_ops const
  ARM: imx: Do L2 errata only if the L2 cache isn't enabled
  ARM: imx: select ARM_CPU_SUSPEND only for imx6
  dmaengine: pxa_dma: fix the maximum requestor line
  ARM: alpine: select the Alpine MSI controller driver
  ARM: pxa: add the number of DMA requestor lines
  dmaengine: mmp-pdma: add number of requestors
  dma: mmp_pdma: Add the #dma-requests DT property documentation
  ARM: OMAP2+: Add rtc hwmod configuration for ti81xx
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: zynq: Move early printk virtual address to vmalloc area
  ARM: DRA7: hwmod: Add custom reset handler for PCIeSS
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  ...

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "As usual, we queue up a few fixes that don't seem urgent enough to go
  in through -rc.

   - a number of randconfig warning fixes from Arnd
   - various small fixes for OMAP
   - one somewhat larger patch to restore the OMAP3 cpuidle tuning that
     was lost in a cleanup
   - a small regression fix for cns3xxx PCI"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  CNS3xxx: Fix PCI cns3xxx_write_config()
  MAINTAINERS: unify email addrs for Kevin Hilman
  CNS3xxx: remove unused *_VIRT definitions
  ARM: OMAP2+: Fix hwmod clock for l4_ls
  soc: TI knav_qmss: fix dma_addr_t printing
  ARM: prima2: always enable reset controller
  ARM: socfpga: hide unused functions
  ARM: ux500: fix ureachable iounmap()
  ARM: ks8695: fix __initdata annotation
  ARM: mvebu: mark mvebu_hwcc_pci_nb as __maybe_unused
  ARM: mv78xx0: avoid unused function warning
  ARM: orion: only select I2C_BOARDINFO when using I2C
  ARM: OMAP2+: Fix out of range register access with syscon_config.max_register
  ARM: OMAP3: Add cpuidle parameters table for omap3430
  ARM: davinci: make I2C support optional
  ARM: davinci: DA8xx+DMx combined kernels need PATCH_PHYS_VIRT
  ARM: davinci: avoid unused mityomapl138_pn_info variable
  ARM: davinci: limit DT support to DA850
  ARM: DRA7: hwmod: Add reset data for PCIe
  ARM: DRA7: hwmod: Fix OCP2SCP sysconfig
  ...

Pull powerpc updates from Michael Ellerman:
 "This was delayed a day or two by some build-breakage on old toolchains
  which we've now fixed.

  There's two PCI commits both acked by Bjorn.

  There's one commit to mm/hugepage.c which is (co)authored by Kirill.

  Highlights:
   - Restructure Linux PTE on Book3S/64 to Radix format from Paul
     Mackerras
   - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh
     Kumar K.V
   - Add POWER9 cputable entry from Michael Neuling
   - FPU/Altivec/VSX save/restore optimisations from Cyril Bur
   - Add support for new ftrace ABI on ppc64le from Torsten Duwe

  Various cleanups & minor fixes from:
   - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy,
     Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell
     Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh.

  General:
   - atomics: Allow architectures to define their own __atomic_op_*
     helpers from Boqun Feng
   - Implement atomic{, 64}_*_return_* variants and acquire/release/
     relaxed variants for (cmp)xchg from Boqun Feng
   - Add powernv_defconfig from Jeremy Kerr
   - Fix BUG_ON() reporting in real mode from Balbir Singh
   - Add xmon command to dump OPAL msglog from Andrew Donnellan
   - Add xmon command to dump process/task similar to ps(1) from Douglas
     Miller
   - Clean up memory hotplug failure paths from David Gibson

  pci/eeh:
   - Redesign SR-IOV on PowerNV to give absolute isolation between VFs
     from Wei Yang.
   - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan.
   - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang
   - PCI: Add pcibios_bus_add_device() weak function from Wei Yang
   - MAINTAINERS: Update EEH details and maintainership from Russell
     Currey

  cxl:
   - Support added to the CXL driver for running on both bare-metal and
     hypervisor systems, from Christophe Lombard and Frederic Barrat.
   - Ignore probes for virtual afu pci devices from Vaibhav Jain

  perf:
   - Export Power8 generic and cache events to sysfs from Sukadev
     Bhattiprolu
   - hv-24x7: Fix usage with chip events, display change in counter
     values, display domain indices in sysfs, eliminate domain suffix in
     event names, from Sukadev Bhattiprolu

  Freescale:
   - Updates from Scott: "Highlights include 8xx optimizations, 32-bit
     checksum optimizations, 86xx consolidation, e5500/e6500 cpu
     hotplug, more fman and other dt bits, and minor fixes/cleanup"

* tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits)
  powerpc: Fix unrecoverable SLB miss during restore_math()
  powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers
  powerpc/rcpm: Fix build break when SMP=n
  powerpc/book3e-64: Use hardcoded mttmr opcode
  powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible
  powerpc/T104xRDB: add tdm riser card node to device tree
  powerpc32: PAGE_EXEC required for inittext
  powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree
  powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s)
  powerpc/86xx: Introduce and use common dtsi
  powerpc/86xx: Update device tree
  powerpc/86xx: Move dts files to fsl directory
  powerpc/86xx: Switch to kconfig fragments approach
  powerpc/86xx: Update defconfigs
  powerpc/86xx: Consolidate common platform code
  powerpc32: Remove one insn in mulhdu
  powerpc32: small optimisation in flush_icache_range()
  powerpc: Simplify test in __dma_sync()
  powerpc32: move xxxxx_dcache_range() functions inline
  powerpc32: Remove clear_pages() and define clear_page() inline
  ...

Samsung Exynos (and older platforms) improvements for v4.6:
1. Split out Exynos PMU driver implementation from arm/mach-exynos
   to the drivers/soc/samsung which will allow re-use of it on ARM64.
2. Use generic DT cpufreq driver on Exynos542x/5800.
3. Minor cleanups.

* tag 'samsung-soc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: s3c24xx: Avoid warning for inb/outb
  ARM: SAMSUNG: Remove unused register offset definition
  ARM: EXYNOS: Cleanup header files inclusion
  drivers: soc: samsung: Enable COMPILE_TEST
  MAINTAINERS: Add maintainers entry for drivers/soc/samsung
  drivers: soc: Add support for Exynos PMU driver
  ARM: EXYNOS: Split up exynos5420 SoC specific PMU data
  ARM: EXYNOS: Split up exynos5250 SoC specific PMU data
  ARM: EXYNOS: Split up exynos4 SoC specific PMU data
  ARM: EXYNOS: Split up exynos3250 SoC specific PMU data
  ARM: EXYNOS: Move pmu specific headers under "linux/soc/samsung"
  ARM: EXYNOS: Correct header comment in Kconfig file
  ARM: EXYNOS: Use generic cpufreq driver for Exynos5422/5800
  ARM: EXYNOS: Use generic cpufreq driver for Exynos5420
  ARM: s3c64xx: use "depends on" instead of "if" after prompt
  ARM: plat-samsung: use to_platform_device()
  ARM: EXYNOS: Code cleanup in map.h
  ARM: EXYNOS: Remove unused static mapping of CMU for exynos5

Signed-off-by: Olof Johansson <olof@lixom.net>

cpm_muram_alloc_common is called twice and both the times
spin_lock_irqsave is held.
Using GFP_KERNEL can sleep in spin_lock_irqsave context and cause
deadlock

Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>

as cpm_muram_alloc_common is used only in this file,
making it static

Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com>
Signed-off-by: Scott Wood <oss@buserror.net>

127 is the theoretical up boundary of QEIC number,
in fact there only be 44 qe_ic_info now.
add check to overflow for qe_ic_info

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Scott Wood <oss@buserror.net>

Merge "Allwinner drivers changes for 4.6" from Maxime Ripard:

Some minor fixes for the RSB and SRAM controller drivers

* tag 'sunxi-drivers-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  drivers: soc: sunxi: Fix mask generation for SRAM mapping
  drivers: sunxi-rsb: fix error output type

The knav_qmss driver is currently broken when CONFIG_LPAE is
set, which is a bit surprising because I'd expect that any serious
users of this platforms would have more than 2GB of RAM and require
LPAE.

The compiler clearly warns about an incorrect use of dma_addr_t
in the debug kernel messages:

ti/knav_qmss_queue.c: In function 'knav_queue_setup_region':
ti/knav_qmss_queue.c:1025:117: warning: format '%x' expects argument of type 'unsigned int', but argument 9 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]
ti/knav_qmss_queue.c:1025:117: warning: format '%x' expects argument of type 'unsigned int', but argument 10 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]
ti/knav_qmss_queue.c: In function 'knav_queue_setup_link_ram':
ti/knav_qmss_queue.c:1175:118: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'dma_addr_t {aka long long unsigned int}' [-Wformat=]

This patch changes all the debugging output to use the correct
%pad format string that works with both 32-bit and 64-bit dma_addr_t.
As the variable naming is somewhat confusing here, I also change
all *_phys names to *_dma when they refer to bus addresses that
are used for DMA rather than a physical memory address as seen from
the CPU. This is particularly important on keystone, because the
two things are not the same there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>