Fixes for omaps for v5.8 The recent display subsystem (DSS) related platform data changes caused display related regressions for suspend and resume. Looks like I only tested suspend and resume before dropping the legacy platform data, and forgot to test it after dropping it. Turns out the main issue was that we no longer have platform code calling pm_runtime_suspend for DSS like we did for the legacy platform data case, and that fix is still being discussed on the dri-devel list and will get merged separately. The DSS related testing exposed a pile other other display related issues that also need fixing though: - Fix ti-sysc optional clock handling and reset status checks for devices that reset automatically in idle like DSS - Ignore ti-sysc clockactivity bit unless separately requested to avoid unexpected performance issues - Init ti-sysc framedonetv_irq to true and disable for am4 - Avoid duplicate DSS reset for legacy mode with dts data - Remove LCD timings for am4 as they cause warnings now that we're using generic panels Then there is a pile of other fixes not related to the DSS: - Fix omap_prm reset deassert as we still have drivers setting the pm_runtime_irq_safe() flag - Flush posted write for ti-sysc enable and disable - Fix droid4 spi related errors with spi flags - Fix am335x USB range and a typo for softreset - Fix dra7 timer nodes for clocks for IPU and DSP - Drop duplicate mailboxes after mismerge for dra7 * tag 'omap-for-v5.8/fixes-merge-window-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: Revert "bus: ti-sysc: Increase max softreset wait" ARM: dts: am437x-epos-evm: remove lcd timings ARM: dts: am437x-gp-evm: remove lcd timings ARM: dts: am437x-sk-evm: remove lcd timings ARM: dts: dra7-evm-common: Fix duplicate mailbox nodes ARM: dts: dra7: Fix timer nodes properly for timer_sys_ck clocks ARM: dts: Fix am33xx.dtsi ti,sysc-mask wrong softreset flag ARM: dts: Fix am33xx.dtsi USB ranges length bus: ti-sysc: Increase max softreset wait ARM: OMAP2+: Fix legacy mode dss_reset bus: ti-sysc: Fix uninitialized framedonetv_irq bus: ti-sysc: Ignore clockactivity unless specified as a quirk bus: ti-sysc: Use optional clocks on for enable and wait for softreset bit ARM: dts: omap4-droid4: Fix spi configuration and increase rate bus: ti-sysc: Flush posted write on enable and disable soc: ti: omap-prm: use atomic iopoll instead of sleeping one Link: https://lore.kernel.org/r/pull-1591889257-410830@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Fix the following sparse warning:
drivers/soc/ti/knav_qmss_queue.c:412:23: warning: symbol 'knav_gp_range_ops' was not declared.
The knav_acc_firmwares has only call site within knav_qmss_queue.c
It should be static
Fixes: 41f93af900a2 ("soc: ti: add Keystone Navigator QMSS driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Samuel Zou <zou_wei@huawei.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The Texas Instruments K3 Multicore SoC platforms have chipid module which
is represented by CTRLMMR_xxx_JTAGID register and contains information
about SoC id and revision.
Bits:
31-28 VARIANT Device variant
27-12 PARTNO Part number
11-1 MFG Indicates TI as manufacturer (0x17)
1 Always 1
This patch adds corresponding driver to identify the TI K3 SoC family and
revision, and registers this information with the SoC bus. It is available
under /sys/devices/soc0/ for user space, and can be checked, where needed,
in Kernel using soc_device_match().
Identification is done by:
- checking MFG to be TI ID
- retrieving Device variant (revision)
- retrieving Part number and convert it to the family
- retrieving machine from DT "/model"
Example J721E:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments K3 J721E SoC
J721E
SR1.0
Example AM65x:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments AM654 Base Board
AM65X
SR1.0
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
The reset handling APIs for omap-prm can be invoked PM runtime which runs in atomic context. For this to work properly, switch to atomic iopoll version instead of the current which can sleep. Otherwise, this throws a "BUG: scheduling while atomic" warning. Issue is seen rather easily when CONFIG_PREEMPT is enabled. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Some cpuidle C-states supported on am335x and am437x, like C1 on am335x, require the use of the wkup_m3_ipc driver, and all C-states beyond C0 on both platforms require the use of the SRAM sleep code. Pass am33xx_do_sram_idle as the idle function to the platform pm core to be used by the cpuidle-arm driver when entering cpuidle states. am33xx_do_sram_idle will detect when the wkup_m3 is needed and ping it if necessary before calling the final cpu_suspend op which will execute the SRAM code to put the cpu into idle. Finally, use the begin_suspend and finish_suspend platform ops to be called at the beginning and end of suspend path to allow use of cpu_idle_poll_ctrl. This prevents races between cpuidle and suspend paths trying to communicate with the wkup_m3, as during suspend we only want it configured for entry to suspend. Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
In order for am335x and am437x to properly enter deeper c-states in cpuidle they must always call into the sleep33/43xx suspend code and also sometimes invoke the wkup_m3_ipc driver. These are both controlled by the pm33xx module so we must provide a method for the platform code to call back into the module when it is available as the core cpuidle ops that are invoked by the cpuidle-arm driver must remain as built in. Extend the init platform op to take an idle function as an argument so that we can use this to call into the pm33xx module for c-states that need it. Also add a deinit op so we can unregister this idle function from the PM core when the pm33xx module gets unloaded. Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull ARM SoC-related driver updates from Olof Johansson:
"Various driver updates for platforms:
- Nvidia: Fuse support for Tegra194, continued memory controller
pieces for Tegra30
- NXP/FSL: Refactorings of QuickEngine drivers to support
ARM/ARM64/PPC
- NXP/FSL: i.MX8MP SoC driver pieces
- TI Keystone: ring accelerator driver
- Qualcomm: SCM driver cleanup/refactoring + support for new SoCs.
- Xilinx ZynqMP: feature checking interface for firmware. Mailbox
communication for power management
- Overall support patch set for cpuidle on more complex hierarchies
(PSCI-based)
and misc cleanups, refactorings of Marvell, TI, other platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits)
drivers: soc: xilinx: Use mailbox IPI callback
dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox
drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists
MAINTAINERS: Add brcmstb PCIe controller entry
soc/tegra: fuse: Unmap registers once they are not needed anymore
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
soc/tegra: fuse: Warn if straps are not ready
soc/tegra: fuse: Cache values of straps and Chip ID registers
memory: tegra30-emc: Correct error message for timed out auto calibration
memory: tegra30-emc: Firm up hardware programming sequence
memory: tegra30-emc: Firm up suspend/resume sequence
soc/tegra: regulators: Do nothing if voltage is unchanged
memory: tegra: Correct reset value of xusb_hostr
soc/tegra: fuse: Add APB DMA dependency for Tegra20
bus: tegra-aconnect: Remove PM_CLK dependency
dt-bindings: mediatek: add MT6765 power dt-bindings
soc: mediatek: cmdq: delete not used define
memory: tegra: Add support for the Tegra194 memory controller
memory: tegra: Only include support for enabled SoCs
memory: tegra: Support DVFS on Tegra186 and later
...
Pull dmaengine updates from Vinod Koul:
"This time we have a bunch of core changes to support dynamic channels,
hotplug of controllers, new apis for metadata ops etc along with new
drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.
Core:
- Support for dynamic channels
- Removal of various slave wrappers
- Make few slave request APIs as private to dmaengine
- Symlinks between channels and slaves
- Support for hotplug of controllers
- Support for metadata_ops for dma_async_tx_descriptor
- Reporting DMA cached data amount
- Virtual dma channel locking updates
New drivers/device/feature support support:
- Driver for Intel data accelerators
- Driver for TI K3 UDMA
- Driver for PLX DMA engine
- Driver for hisilicon Kunpeng DMA engine
- Support for eDMA support for QorIQ LS1028A in fsl edma driver
- Support for cyclic dma in sun4i driver
- Support for X1830 in JZ4780 driver"
* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
dmaengine: Create symlinks between DMA channels and slaves
dmaengine: hisilicon: Add Kunpeng DMA engine support
dmaengine: idxd: add char driver to expose submission portal to userland
dmaengine: idxd: connect idxd to dmaengine subsystem
dmaengine: idxd: add descriptor manipulation routines
dmaengine: idxd: add sysfs ABI for idxd driver
dmaengine: idxd: add configuration component of driver
dmaengine: idxd: Init and probe for Intel data accelerators
dmaengine: add support to dynamic register/unregister of channels
dmaengine: break out channel registration
x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
dmaengine: Remove dma_request_slave_channel_compat() wrapper
dmaengine: Remove dma_device_satisfies_mask() wrapper
dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
dmaengine: zynqmp_dma: fix burst length configuration
dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
dmaengine: fsl-qdma: fix duplicated argument to &&
...
inst->handles is traversed using list_for_each_entry_rcu outside an RCU read-side critical section but under the protection of knav_dev_lock. Hence, add corresponding lockdep expression to silence false-positive lockdep warnings, and harden RCU lists. Add macro for the corresponding lockdep expression. Link: https://lore.kernel.org/r/20200118042433.4968-1-frextrite@gmail.com Signed-off-by: Amol Grover <frextrite@gmail.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>