linux.git/drivers/soc/ti, branch v4.4

soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers

2015-11-23T18:36:27+00:00

Configure linking RAM for both queue managers also in case
when only linking RAM 0 is specified in device tree.

Currently hwqueue driver configures linking RAM(s) to be used
cooperatively by the QMs (shared mode). Therefore if both
queue managers are used then both must be configured with
exactly the same linking RAM info (base address and size)
independent of the number of linking RAM(s) specified in the
device tree.
For proper operation only one linking RAM is required and in most
cases this can be internal one as long as it is able to handle
the number of descriptors used in the system.
Current driver code however skips configuration of second
queue manager if second linking RAM is not specified.
If the configuration for the QM2 is missing there will be
a crash when it tries to push/pop descriptors from its queues.

Signed-off-by: Michal Morawiec 
Signed-off-by: Santosh Shilimkar

soc: ti: use request_firmware_direct() as acc firmware is optional

2015-11-23T18:32:44+00:00

When firmware image for PDSP firmware is absent in the file system
the kernel boot with ramfs/nfs is stuck for 60 seconds being the
the default timeout. request_firmware_direct() is to take care of
such optional firmware loading and hence replace the call in the
driver with this API.

Signed-off-by: Murali Karicheri 
Signed-off-by: Santosh Shilimkar

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-10T22:56:23+00:00

Pull ARM SoC platform updates from Olof Johansson:
 "New and/or improved SoC support for this release:

  Marvell Berlin:
     - Enable standard DT-based cpufreq
     - Add CPU hotplug support

  Freescale:
     - Ethernet init for i.MX7D
     - Suspend/resume support for i.MX6UL

  Allwinner:
     - Support for R8 chipset (used on NTC's $9 C.H.I.P board)

  Mediatek:
     - SMP support for some platforms

  Uniphier:
     - L2 support
     - Cleaned up SMP support, etc.

  plus a handful of other patches around above functionality, and a few
  other smaller changes"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  ARM: uniphier: rework SMP operations to use trampoline code
  ARM: uniphier: add outer cache support
  Documentation: EXYNOS: Update bootloader interface on exynos542x
  ARM: mvebu: add broken-idle option
  ARM: orion5x: use mac_pton() helper
  ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned
  ARM: sunxi: Add R8 support
  ARM: digicolor: select pinctrl/gpio driver
  arm: berlin: add CPU hotplug support
  arm: berlin: use non-self-cleared reset register to reset cpu
  ARM: mediatek: add smp bringup code
  ARM: mediatek: enable gpt6 on boot up to make arch timer working
  soc: mediatek: Fix random hang up issue while kernel init
  soc: ti: qmss: make acc queue support optional in the driver
  soc: ti: add firmware file name as part of the driver
  Documentation: dt: soc: Add description for knav qmss driver
  ARM: S3C64XX: Use PWM lookup table for mach-smartq
  ARM: S3C64XX: Use PWM lookup table for mach-hmt
  ARM: S3C64XX: Use PWM lookup table for mach-crag6410
  ARM: S3C64XX: Use PWM lookup table for smdk6410
  ...

soc: ti: qmss: make acc queue support optional in the driver

2015-10-13T20:49:04+00:00

acc channels are available only if accumulator PDSP is loaded and
running in the SoC. As this requires firmware and user may not have
firmware in the file system, make the accumulator queue support
available in qmss driver optional. To use accumulator queus user needs
to add firmware to the file system and boot up kernel.

Signed-off-by: Murali Karicheri 
Signed-off-by: Santosh Shilimkar

soc: ti: add firmware file name as part of the driver

2015-10-13T20:49:04+00:00

Currently firmware file name is included in the DTS. This is not scalable
as user has to change the DTS if they need upgrade to a new firmware.
Instead, add the firmware file name in the driver itself. As long as there
is no API change, new firmware upgrade is easy and require no driver
change. User is expected to copy the firmware image to the file system
and add a sym link to the new firmware for doing an upgrade. Driver add
a array of firmware file names to search for the available firmware blobs.
This scheme also prepare the driver for future changes to API if ever
happens. In such case it is assumed that driver needs to change to
accommodate the new firmware and new firmware file name will get added to
the array.

Also update the DT document to remove the firmware attribute and add
description about firmware in the driver documentation.

Signed-off-by: Murali Karicheri 
Acked-by: Arnd Bergmann 
Signed-off-by: Santosh Shilimkar

soc: ti: reset irq affinity before freeing irq

2015-10-08T19:29:11+00:00

When using accumulator queue for rx side for network driver, following
warning is seen when doing a reboot command from Linux console. This
is because, affinity value is not reset before calling free_irq(). This
patch fixes this.

Deconfiguring network interfaces...
 ------------[ cut here ]-----------
 WARNING: CPU: 0 PID: 2081 at kernel/irq/manage.c:1370
__free_irq+0x208/0x214
 Modules linked in:
 CPU: 0 PID: 2081 Comm: ifconfig Not tainted 4.1.5-00908-g1049e206-dirty #1
 Hardware name: Keystone
 Backtrace:
 [] (dump_backtrace) from [] (show_stack+0x18/0x1c)
 r7:c005d0a8 r6:c06e2184 r5:c06e2184 r4:00000000
 [] (show_stack) from [] (dump_stack+0x8c/0xcc)
 [] (dump_stack) from [] (warn_slowpath_common+0x88/0xb8)
 r7:c005d0a8 r6:0000055a r5:00000009 r4:0000000
 [] (warn_slowpath_common) from [] (warn_slowpath_null+0x
24/0x2c)
 r8:0000006c r7:ee513f60 r6:ee513f00 r5:ee611010 r4:cc873a00
 (warn_slowpath_null) from [] (__free_irq+0x208/0x214)
 [] (__free_irq) from [] (free_irq+0x54/0xac)
 r10:00000002 r9:00000000 r8:00000000 r7:ee611010
r6:0000006c r5:00000000
  r4:ee513f00 r3:00000000
  [] (free_irq) from [] (knav_range_setup_acc_irq+0xb0/0x1
28)
  r7:00000001 r6:0000006c r5:ee611010 r4:00000001
  [] (knav_range_setup_acc_irq) from [] (knav_acc_close_qu
eue+0x20/0x24)
  r8:edd1a4c8 r7:00001000 r6:eed89980 r5:ee616650 r4:edf9d990
  [] (knav_acc_close_queue) from [] (knav_queue_close+0xb4
/0xb8)
  [] (knav_queue_close) from [] (netcp_free_navigator_reso
urces+0x1d4/0x2c0)
 r5:edd1a480 r4:00000400
 [] (netcp_free_navigator_resources) from
 [] (netcp_ndo_stop+0x220/0x230)
 r10:00008914 r9:edf34400 r8:00000000 r7:edd1a5d8 r6:edd1a480 r5:00000400
 r4:edd1a000
 [] (netcp_ndo_stop) from [ (__dev_close_many+0x90/0xd8)
 r7:00001003 r6:00001042 r5:edb0de20 r4:edd1a000
 [] (__dev_close_many) from [] (__dev_close+0x30/0x48)
  r5:00000001 r4:edd1a000
 [] (__dev_close) from [] (__dev_change_flags+0x9c/0x14c)
 [] (__dev_change_flags) from [] (dev_change_flags+0x20/0

  r9:edf34400 r8:00000000 r7:00000000 r6:00001003 r5:edd1a138 r4:edd1a000
 [] (dev_change_flags) from [] (devinet_ioctl+0x680/0x754

  r9:edf34400 r8:bef6af3c r7:00000000 r6:bef6ac64 r5:edf3440c r4:00000000
 [] (devinet_ioctl) from [] (inet_ioctl+0x1a8/0x1d0)
  r10:00000000 r9:edb0c000 r8:bef6ac64 r7:00000003 r6:bef6ac64 r5:bef6ac64
  r4:00008914
 [] (inet_ioctl) from [] (sock_ioctl+0x1d0/0x2a8)
 [] (sock_ioctl) from [] (do_vfs_ioctl+0x414/0x604)
  r7:00000003 r6:ed8b60c0 r5:bef6ac64 r4:ccc88f20
 [] (do_vfs_ioctl) from [] (SyS_ioctl+0x3c/0x64)
  r9:edb0c000 r8:bef6ac64 r7:00008914 r6:ed8b60c0 r5:00000003 r4:ed8b60c0
 [] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
  r9:edb0c000 r8:c000f924 r7:00000036 r6:0007e77c r5:bef6ac64 r4:0007e7d0
 ---[ end trace f565594c905af0b4 ]---

Signed-off-by: Murali Karicheri 
Signed-off-by: Santosh Shilimkar 
Signed-off-by: Arnd Bergmann

soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static

2015-01-29T21:23:51+00:00

knav_range_setup_acc_irq() is used only within the file and should
be defined as static.

Signed-off-by: Murali Karicheri 
Signed-off-by: Santosh Shilimkar

soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module

2015-01-29T21:23:51+00:00

Currently configuring qmss and dma as dynamic module creates three .ko
files. knav_qmss_acc.ko and knav_qmss_queue.ko both can't be insmod
because of circular dependency. So combine these two into one module
by changing the makefile.

Signed-off-by: Murali Karicheri 
Signed-off-by: Santosh Shilimkar

soc: ti: knav_qmss_queue: export API calls for use by user driver

2015-01-29T17:04:26+00:00

Currently only few of the API calls are exported. This creates problem
when the knav* modules are built as modules and another user module
such as netcp_core try to use these API calls and they are also built
as module. This patch export these APIs to address the issue.

This is needed to support allmodconfig for ARM

Signed-off-by: Murali Karicheri 
Signed-off-by: Santosh Shilimkar

Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2014-12-15T00:10:09+00:00

Pull driver core update from Greg KH:
 "Here's the set of driver core patches for 3.19-rc1.

  They are dominated by the removal of the .owner field in platform
  drivers.  They touch a lot of files, but they are "simple" changes,
  just removing a line in a structure.

  Other than that, a few minor driver core and debugfs changes.  There
  are some ath9k patches coming in through this tree that have been
  acked by the wireless maintainers as they relied on the debugfs
  changes.

  Everything has been in linux-next for a while"

* tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits)
  Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries"
  fs: debugfs: add forward declaration for struct device type
  firmware class: Deletion of an unnecessary check before the function call "vunmap"
  firmware loader: fix hung task warning dump
  devcoredump: provide a one-way disable function
  device: Add dev__once variants
  ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries
  ath: use seq_file api for ath9k debugfs files
  debugfs: add helper function to create device related seq_file
  drivers/base: cacheinfo: remove noisy error boot message
  Revert "core: platform: add warning if driver has no owner"
  drivers: base: support cpu cache information interface to userspace via sysfs
  drivers: base: add cpu_device_create to support per-cpu devices
  topology: replace custom attribute macros with standard DEVICE_ATTR*
  cpumask: factor out show_cpumap into separate helper function
  driver core: Fix unbalanced device reference in drivers_probe
  driver core: fix race with userland in device_add()
  sysfs/kernfs: make read requests on pre-alloc files use the buffer.
  sysfs/kernfs: allow attributes to request write buffer be pre-allocated.
  fs: sysfs: return EGBIG on write if offset is larger than file size
  ...