linux.git/drivers/soc/tegra, branch v5.13 Linux kernel source tree Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl 2021-04-30T20:04:30+00:00 Linus Torvalds torvalds@linux-foundation.org 2021-04-30T20:04:30+00:00 65ec0a7d24913b146cd1500d759b8c340319d55e Pull pin control updates from Linus Walleij: "There is a lot going on! Core changes: - A semantic change to handle pinmux and pinconf in explicit order while up until now we depended on the semantic order in the device tree. The device tree is a functional programming language and does not imply any order, so the right thing is for the pin control core to provide these semantics. - Add a new pinmux-select debugfs file which makes it possible to go in and select functions for a pin manually (iteratively, at the prompt) for debugging purposes. - Fixes to gpio regmap handling for a new pin control driver making use of regmap-gpio. - Use octal permissions on debugfs files. New drivers: - A massive rewrite of the former custom pin control driver for MIPS Broadcom devices to instead use the pin control subsystem. New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368, BCM63268 and BCM6318 SoC variants are implemented. - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are supported. - Support for the Rockchip RK3568/RK3566 pin controller. - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000. - Support for Mediatek MTK8195. - Add a new Xilinx ZynqMP pin control driver. Driver improvements and non-urgent fixes: - Modularization and improvements of the Rockchip drivers. - Some new pins added to the description of new Renesas SoCs. - Clarifications of the GPIO base calculation in the Intel driver. - Fix the function names for the MPP54 and MPP55 pins in the Armada CP110 pin controller. - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350. - Support for ACPI probing of the Qualcomm SC8180x. - Fix interrupt clear status on rockchip - Fix some missing pins on the Ingenic JZ4770, some semantic fixes for the behaviour of the Ingenic pin controller. Add DMIC pins for JZ4780, X1000, X1500 and X1830. - A slew of janitorial like of_node_put() calls" * tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits) pinctrl: Add Xilinx ZynqMP pinctrl driver support firmware: xilinx: Add pinctrl support pinctrl: rockchip: do coding style for mux route struct pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param pinctrl: Introduce MODE group in enum pin_config_param pinctrl: Keep enum pin_config_param ordered by name dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver pinctrl: core: Fix kernel doc string for pin_get_name() pinctrl: mediatek: use spin lock in mtk_rmw pinctrl: add drive for I2C related pins on MT8195 pinctrl: add pinctrl driver on mt8195 dt-bindings: pinctrl: mt8195: add pinctrl file and binding document pinctrl: Ingenic: Add pinctrl driver for X2000. pinctrl: Ingenic: Add pinctrl driver for JZ4775. pinctrl: Ingenic: Add pinctrl driver for JZ4755. pinctrl: Ingenic: Add pinctrl driver for JZ4750. pinctrl: Ingenic: Add pinctrl driver for JZ4730. dt-bindings: pinctrl: Add bindings for new Ingenic SoCs. pinctrl: Ingenic: Reformat the code. pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs. ... 
Pull pin control updates from Linus Walleij:
 "There is a lot going on!

  Core changes:

   - A semantic change to handle pinmux and pinconf in explicit order
     while up until now we depended on the semantic order in the device
     tree. The device tree is a functional programming language and does
     not imply any order, so the right thing is for the pin control core
     to provide these semantics.

   - Add a new pinmux-select debugfs file which makes it possible to go
     in and select functions for a pin manually (iteratively, at the
     prompt) for debugging purposes.

   - Fixes to gpio regmap handling for a new pin control driver making
     use of regmap-gpio.

   - Use octal permissions on debugfs files.

  New drivers:

   - A massive rewrite of the former custom pin control driver for MIPS
     Broadcom devices to instead use the pin control subsystem. New pin
     control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
     BCM63268 and BCM6318 SoC variants are implemented.

   - Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
     in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
     supported.

   - Support for the Rockchip RK3568/RK3566 pin controller.

   - Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.

   - Support for Mediatek MTK8195.

   - Add a new Xilinx ZynqMP pin control driver.

  Driver improvements and non-urgent fixes:

   - Modularization and improvements of the Rockchip drivers.

   - Some new pins added to the description of new Renesas SoCs.

   - Clarifications of the GPIO base calculation in the Intel driver.

   - Fix the function names for the MPP54 and MPP55 pins in the Armada
     CP110 pin controller.

   - GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.

   - Support for ACPI probing of the Qualcomm SC8180x.

   - Fix interrupt clear status on rockchip

   - Fix some missing pins on the Ingenic JZ4770, some semantic fixes
     for the behaviour of the Ingenic pin controller. Add DMIC pins for
     JZ4780, X1000, X1500 and X1830.

   - A slew of janitorial like of_node_put() calls"

* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: Add Xilinx ZynqMP pinctrl driver support
  firmware: xilinx: Add pinctrl support
  pinctrl: rockchip: do coding style for mux route struct
  pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
  pinctrl: Introduce MODE group in enum pin_config_param
  pinctrl: Keep enum pin_config_param ordered by name
  dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
  pinctrl: core: Fix kernel doc string for pin_get_name()
  pinctrl: mediatek: use spin lock in mtk_rmw
  pinctrl: add drive for I2C related pins on MT8195
  pinctrl: add pinctrl driver on mt8195
  dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
  pinctrl: Ingenic: Add pinctrl driver for X2000.
  pinctrl: Ingenic: Add pinctrl driver for JZ4775.
  pinctrl: Ingenic: Add pinctrl driver for JZ4755.
  pinctrl: Ingenic: Add pinctrl driver for JZ4750.
  pinctrl: Ingenic: Add pinctrl driver for JZ4730.
  dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
  pinctrl: Ingenic: Reformat the code.
  pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
  ...
pinctrl: Introduce MODE group in enum pin_config_param 2021-04-22T00:03:01+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2021-04-12T14:07:40+00:00 31f9a421a1d01538776db37ec9c5419a3a49d650 Better to have a MODE group of settings to keep them together when ordered alphabetically. Hence, rename PIN_CONFIG_LOW_POWER_MODE to PIN_CONFIG_MODE_LOW_POWER. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210412140741.39946-2-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> 
Better to have a MODE group of settings to keep them together
when ordered alphabetically. Hence, rename PIN_CONFIG_LOW_POWER_MODE
to PIN_CONFIG_MODE_LOW_POWER.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210412140741.39946-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
soc/tegra: pmc: Print out domain name when reset fails to acquire 2021-03-26T12:10:25+00:00 Dmitry Osipenko digetx@gmail.com 2021-03-02T12:25:01+00:00 366d7c643a8a9db652341e314b33d3fc80595e6c Print out domain name when reset fails to acquire for debugging purposes and to make formatting of GENPD errors consistent in the driver. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Print out domain name when reset fails to acquire for debugging purposes
and to make formatting of GENPD errors consistent in the driver.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: pmc: Ensure that clock rates aren't too high 2021-03-26T12:10:25+00:00 Dmitry Osipenko digetx@gmail.com 2021-03-02T12:25:00+00:00 66ee50c6e23432efded0c34ea71428f97cac808a Switch all clocks of a power domain to a safe rate which is suitable for all possible voltages in order to ensure that hardware constraints aren't violated when power domain state toggles. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Switch all clocks of a power domain to a safe rate which is suitable
for all possible voltages in order to ensure that hardware constraints
aren't violated when power domain state toggles.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: pmc: Fix completion of power-gate toggling 2021-03-26T12:10:25+00:00 Dmitry Osipenko digetx@gmail.com 2021-03-02T12:24:59+00:00 c45e66a6b9f40f2e95bc6d97fbf3daa1ebe88c6b The SW-initiated power gate toggling is dropped by PMC if there is contention with a HW-initiated toggling, i.e. when one of CPU cores is gated by cpuidle driver. Software should retry the toggling after 10 microseconds on Tegra20/30 SoCs, hence add the retrying. On Tegra114+ the toggling method was changed in hardware, the TOGGLE_START bit indicates whether PMC is busy or could accept the command to toggle, hence handle that bit properly. The problem pops up after enabling dynamic power gating of 3D hardware, where 3D power domain fails to turn on/off "randomly". The programming sequence and quirks are documented in TRMs, but PMC driver obliviously re-used the Tegra20 logic for Tegra30+, which strikes back now. The 10 microseconds and other timeouts aren't documented in TRM, they are taken from downstream kernel. Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=commit;h=311dd1c318b70e93bcefec15456a10ff2b9eb0ff Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-3.10.git;a=commit;h=7f36693c47cb23730a6b2822e0975be65fb0c51d Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
The SW-initiated power gate toggling is dropped by PMC if there is
contention with a HW-initiated toggling, i.e. when one of CPU cores is
gated by cpuidle driver. Software should retry the toggling after 10
microseconds on Tegra20/30 SoCs, hence add the retrying. On Tegra114+ the
toggling method was changed in hardware, the TOGGLE_START bit indicates
whether PMC is busy or could accept the command to toggle, hence handle
that bit properly.

The problem pops up after enabling dynamic power gating of 3D hardware,
where 3D power domain fails to turn on/off "randomly".

The programming sequence and quirks are documented in TRMs, but PMC
driver obliviously re-used the Tegra20 logic for Tegra30+, which strikes
back now. The 10 microseconds and other timeouts aren't documented in TRM,
they are taken from downstream kernel.

Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-2.6.git;a=commit;h=311dd1c318b70e93bcefec15456a10ff2b9eb0ff
Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-3.10.git;a=commit;h=7f36693c47cb23730a6b2822e0975be65fb0c51d
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: pmc: Fix imbalanced clock disabling in error code path 2021-03-26T12:10:25+00:00 Dmitry Osipenko digetx@gmail.com 2021-03-02T12:24:58+00:00 19221e3083020bd9537624caa0ee0145ed92ba36 The tegra_powergate_power_up() has a typo in the error code path where it will try to disable clocks twice, fix it. In practice that error never happens, so this is a minor correction. Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
The tegra_powergate_power_up() has a typo in the error code path where it
will try to disable clocks twice, fix it. In practice that error never
happens, so this is a minor correction.

Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: regulators: Fix locking up when voltage-spread is out of range 2021-03-26T12:10:25+00:00 Dmitry Osipenko digetx@gmail.com 2021-03-02T13:18:00+00:00 ef85bb582c41524e9e68dfdbde48e519dac4ab3d Fix voltage coupler lockup which happens when voltage-spread is out of range due to a bug in the code. The max-spread requirement shall be accounted when CPU regulator doesn't have consumers. This problem is observed on Tegra30 Ouya game console once system-wide DVFS is enabled in a device-tree. Fixes: 783807436f36 ("soc/tegra: regulators: Add regulators coupler for Tegra30") Cc: stable@vger.kernel.org Reported-by: Peter Geis <pgwipeout@gmail.com> Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30 Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30 Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
Fix voltage coupler lockup which happens when voltage-spread is out
of range due to a bug in the code. The max-spread requirement shall be
accounted when CPU regulator doesn't have consumers. This problem is
observed on Tegra30 Ouya game console once system-wide DVFS is enabled
in a device-tree.

Fixes: 783807436f36 ("soc/tegra: regulators: Add regulators coupler for Tegra30")
Cc: stable@vger.kernel.org
Reported-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
soc/tegra: pmc: Provide USB sleepwalk register map 2021-03-26T12:10:25+00:00 JC Kuo jckuo@nvidia.com 2021-01-20T07:34:07+00:00 9d5e7c3e36ebae838c3427ed943e14f976715bbb This commit implements a register map which grants USB (UTMI and HSIC) sleepwalk registers access to USB PHY drivers. The USB sleepwalk logic is in PMC hardware block but USB PHY drivers have the best knowledge of proper programming sequence. Signed-off-by: JC Kuo <jckuo@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
This commit implements a register map which grants USB (UTMI and HSIC)
sleepwalk registers access to USB PHY drivers. The USB sleepwalk logic
is in PMC hardware block but USB PHY drivers have the best knowledge
of proper programming sequence.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Merge tag 'tegra-for-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers 2020-11-27T16:56:10+00:00 Arnd Bergmann arnd@arndb.de 2020-11-27T16:56:09+00:00 3afd2823c1195b77047cad33b208f5b5032f53b3 soc/tegra: Changes for v5.11-rc1 This contains a couple of warning fixes and a fix for a mostly harmless bug in the process ID retrieval code. * tag 'tegra-for-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: fuse: Fix index bug in get_process_id soc: tegra: fuse: speedo-tegra210: Remove a group of set but unused variables soc: tegra: fuse: speedo-tegra124: Remove some set but unused variables Link: https://lore.kernel.org/r/20201127144329.124891-2-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> 
soc/tegra: Changes for v5.11-rc1

This contains a couple of warning fixes and a fix for a mostly harmless
bug in the process ID retrieval code.

* tag 'tegra-for-5.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: fuse: Fix index bug in get_process_id
  soc: tegra: fuse: speedo-tegra210: Remove a group of set but unused variables
  soc: tegra: fuse: speedo-tegra124: Remove some set but unused variables

Link: https://lore.kernel.org/r/20201127144329.124891-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
soc/tegra: fuse: Fix index bug in get_process_id 2020-11-19T10:43:49+00:00 Nicolin Chen nicoleotsuka@gmail.com 2020-11-19T04:44:57+00:00 b9ce9b0f83b536a4ac7de7567a265d28d13e5bea This patch simply fixes a bug of referencing speedos[num] in every for-loop iteration in get_process_id function. Fixes: 0dc5a0d83675 ("soc/tegra: fuse: Add Tegra210 support") Cc: <stable@vger.kernel.org> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 
This patch simply fixes a bug of referencing speedos[num] in every
for-loop iteration in get_process_id function.

Fixes: 0dc5a0d83675 ("soc/tegra: fuse: Add Tegra210 support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>