Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "The most notable updates this time are for Qualcomm Snapdragon
  platforms. The Inline-Crypto-Engine gets a new DT binding and driver,
  and a number of drivers now support additional Snapdragon variants, in
  particular the rsc, scm, geni, bwm, glink and socinfo, while the llcc
  (edac) and rpm drivers get notable functionality updates.

  Updates on other platforms include:

   - Various updates to the Mediatek mutex and mmsys drivers, including
     support for the Helio X10 SoC

   - Support for unidirectional mailbox channels in Arm SCMI firmware

   - Support for per cpu asynchronous notification in OP-TEE firmware

   - Minor updates for memory controller drivers.

   - Minor updates for Renesas, TI, Amlogic, Apple, Broadcom, Tegra,
     Allwinner, Versatile Express, Canaan, Microchip, Mediatek and i.MX
     SoC drivers, mainly updating the use of MODULE_LICENSE() macros and
     obsolete DT driver interfaces"

* tag 'soc-drivers-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  soc: ti: smartreflex: Simplify getting the opam_sr pointer
  bus: vexpress-config: Add explicit of_platform.h include
  soc: mediatek: Kconfig: Add MTK_CMDQ dependency to MTK_MMSYS
  memory: mtk-smi: mt8365: Add SMI Support
  dt-bindings: memory-controllers: mediatek,smi-larb: add mt8365
  dt-bindings: memory-controllers: mediatek,smi-common: add mt8365
  memory: tegra: read values from correct device
  dt-bindings: crypto: Add Qualcomm Inline Crypto Engine
  soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver
  dt-bindings: firmware: document Qualcomm QCM2290 SCM
  soc: qcom: rpmh-rsc: Support RSC v3 minor versions
  soc: qcom: smd-rpm: Use GFP_ATOMIC in write path
  soc/tegra: fuse: Remove nvmem root only access
  soc/tegra: cbb: tegra194: Use of_address_count() helper
  soc/tegra: cbb: Remove MODULE_LICENSE in non-modules
  ARM: tegra: Remove MODULE_LICENSE in non-modules
  soc/tegra: flowctrl: Use devm_platform_get_and_ioremap_resource()
  soc: tegra: cbb: Drop empty platform remove function
  firmware: arm_scmi: Add support for unidirectional mailbox channels
  dt-bindings: firmware: arm,scmi: Support mailboxes unidirectional channels
  ...

The dedicated ICE driver was merged through a immutable tag, to make it
available to other maintainers.

This takes the already existing duplicated support in both ufs-qcom
and sdhci-msm drivers and makes it a dedicated driver that can be used
by both mentioned drivers.

The reason for this is because, staring with SM8550, the ICE IP block
is shared between UFS and SDCC, which means we need to probe a dedicated
device and share it between those two consumers.

So let's add the ICE dedicated driver as a soc driver.

Platforms that already have ICE supported, will use it as a library
as the of_qcom_ice_get will return an ICE instance created for the
consumer device. This allows the backwards compatibility with old-style
devicetree approach.

Also, add support to HW version 4.x since it works out-of-the-box with
the current driver. The 4.x HW version is found on SM8550 platform.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407105029.2274111-4-abel.vesa@linaro.org

RSC v3 register offsets are same for all minor versions of v3. Fix a
minor version check to pick correct offsets for all v3 minor versions.

Fixes: 40482e4f7364 ("soc: qcom: rpmh-rsc: Add support for RSC v3 register offsets")
Signed-off-by: Tushar Nimkar <quic_tnimkar@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230406115732.9293-1-quic_tnimkar@quicinc.com

Preparing for better lockdep annotations for things that happen in runpm
suspend/resume path vs shrinker/reclaim in the following patches, we
need to avoid allocations that can trigger reclaim in the icc_set_bw()
path.  In the RPMh case, rpmh_write_batch() already uses GFP_ATOMIC, so
it should be reasonable to use in the smd-rpm case as well.

Alternatively, 256bytes is small enough for a function that isn't called
recursively to allocate on-stack.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230320144356.803762-21-robdclark@gmail.com

The BWMON hardware has two sets of registers: one for the monitor itself
and one called "global". It has what seems to be some kind of a head
switch and an interrupt control register. It's usually 0x200 in size.

On fairly recent SoCs (with the starting point seemingly being moving
the OSM programming to the firmware) these two register sets are
contiguous and overlapping, like this (on sm8450):

/* notice how base.start == global_base.start+0x100 */
reg = <0x90b6400 0x300>, <0x90b6300 0x200>;
reg-names = "base", "global_base";

Which led to some confusion and the assumption that since the
"interesting" global registers begin right after global_base+0x100,
there's no need to map two separate regions and one can simply subtract
0x100 from the offsets.

This is however not the case for anything older than SDM845, as the
global region can appear in seemingly random spots on the register map.

Handle the case where the global registers are mapped separately to allow
proper functioning of BWMONv4 on MSM8998 and older. Add specific
compatibles for 845, 8280xp, 7280 and 8550 (all of which use the single
reg space scheme) to keep backwards compatibility with old DTs.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-3-77a050c2fbda@linaro.org

bwmon->regmap was never used, as the regmap for bwmon is registered
through devres and accessed through bwmon's regmap_field members.
Remove it

Fixes: ec63dcd3c863 ("soc: qcom: icc-bwmon: use regmap and prepare for BWMON v5")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-2-77a050c2fbda@linaro.org

We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the open-code with dev_err_probe() to simplify the code.

Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/202303241018532824420@zte.com.cn