linux.git/drivers/soc/qcom, branch v6.2-rc4

Merge tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2022-12-15T22:47:10+00:00

Pull i2c updates from Wolfram Sang:
 "Core got a new helper 'i2c_client_get_device_id()', designware got
  some bigger updates, the rest is driver updates all over the place"

* tag 'i2c-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (41 commits)
  i2c: ismt: Fix an out-of-bounds bug in ismt_access()
  i2c: mux: reg: check return value after calling platform_get_resource()
  i2c: xiic: Make sure to disable clock on .remove()
  i2c: hisi: Add support to get clock frequency from clock
  i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe
  i2c: slave-eeprom: Convert to i2c's .probe_new()
  i2c: mux: pca954x: Convert to i2c's .probe_new()
  drivers/i2c: use simple i2c probe
  i2c: mux: pca9541: switch to using .probe_new
  i2c: gpio: Fix potential unused warning for 'i2c_gpio_dt_ids'
  i2c: qcom-geni: add support for I2C Master Hub variant
  i2c: qcom-geni: add desc struct to prepare support for I2C Master Hub variant
  soc: qcom: geni-se: add support for I2C Master Hub wrapper variant
  soc: qcom: geni-se: add desc struct to specify clocks from device match data
  dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine
  dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant
  dt-bindings: i2c: renesas,riic: Document RZ/Five SoC
  i2c: tegra: Set ACPI node as primary fwnode
  i2c: smbus: add DDR support for SPD
  i2c: /pasemi: PASemi I2C controller IRQ enablement
  ...

soc: qcom: socinfo: Add SM6115 / SM4250 SoC IDs to the soc_id table

2022-12-05T22:50:40+00:00

Add SoC ID table entries for the SM6115 / SM4250 and variants.

Cc: Bjorn Andersson 
Cc: Krzysztof Kozlowski 
Signed-off-by: Bhupesh Sharma 
Reviewed-by: Konrad Dybcio 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221201141619.2462705-5-bhupesh.sharma@linaro.org

soc: qcom: socinfo: Add SM8150 and SA8155 SoC IDs to the soc_id table

2022-12-05T22:50:39+00:00

Add SoC ID table entries for the SM8150 and SA8155 SoCs.

Cc: Bjorn Andersson 
Cc: Krzysztof Kozlowski 
Signed-off-by: Bhupesh Sharma 
Reviewed-by: Konrad Dybcio 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221201141619.2462705-3-bhupesh.sharma@linaro.org

soc: qcom: Select REMAP_MMIO for ICC_BWMON driver

2022-12-05T22:38:03+00:00

ICC_BWMON driver uses REGMAP_MMIO for accessing the hardware registers.
So select the dependency in Kconfig. Without this, there will be errors
while building the driver with COMPILE_TEST only:

ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/soc/qcom/icc-bwmon.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:126: Module.symvers] Error 1
make: *** [Makefile:1944: modpost] Error 2

Cc:  # 6.0
Cc: Krzysztof Kozlowski 
Fixes: b9c2ae6cac40 ("soc: qcom: icc-bwmon: Add bandwidth monitoring driver")
Signed-off-by: Manivannan Sadhasivam 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221129072022.41962-1-manivannan.sadhasivam@linaro.org

soc: qcom: Select REMAP_MMIO for LLCC driver

2022-12-05T22:37:35+00:00

LLCC driver uses REGMAP_MMIO for accessing the hardware registers. So
select the dependency in Kconfig. Without this, there will be errors
while building the driver with COMPILE_TEST only:

ERROR: modpost: "__devm_regmap_init_mmio_clk" [drivers/soc/qcom/llcc-qcom.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:126: Module.symvers] Error 1
make: *** [Makefile:1944: modpost] Error 2

Cc:  # 4.19
Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver")
Reported-by: Borislav Petkov 
Signed-off-by: Manivannan Sadhasivam 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221129071201.30024-2-manivannan.sadhasivam@linaro.org

soc: qcom: rpmpd: Add SM4250 support

2022-12-05T22:30:36+00:00

SM4250 has the same RPM power domains as SM6115. Add SM4250
support by reusing SM6115 power domains.

Cc: Bjorn Andersson 
Cc: Rajendra Nayak 
Cc: Konrad Dybcio 
Cc: Rob Herring 
Cc: Krzysztof Kozlowski 
Signed-off-by: Bhupesh Sharma 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221127112204.1486337-3-bhupesh.sharma@linaro.org

soc: qcom: llcc: Add configuration data for SM8550

2022-12-05T21:12:52+00:00

Add LLCC configuration data for SM8550 SoC.

Signed-off-by: Abel Vesa 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221116113005.2653284-4-abel.vesa@linaro.org

soc: qcom: llcc: Add v4.1 HW version support

2022-12-05T21:12:52+00:00

The LLCC found in SM8550 supports more slice configuration knobs and HW
block version has been bumped up to 4.1. Add support for the new version
and make sure the new config values are programed on probe.

Signed-off-by: Abel Vesa 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221116113005.2653284-2-abel.vesa@linaro.org

soc: qcom: socinfo: Add SM8550 ID

2022-12-05T21:12:27+00:00

Add the ID for the Qualcomm SM8550 SoC.

Signed-off-by: Abel Vesa 
Reviewed-by: Konrad Dybcio 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221116112438.2643607-1-abel.vesa@linaro.org

soc: qcom: rpmh-rsc: Avoid unnecessary checks on irq-done response

2022-12-05T21:12:17+00:00

The RSC interrupt is issued only after the request is complete. For
fire-n-forget requests, the irq-done interrupt is sent after issuing the
RPMH request and for response-required request, the interrupt is
triggered only after all the requests are complete.

These unnecessary checks in the interrupt handler issues AHB reads from
a critical path. Lets remove them and clean up error handling in
rpmh_request data structures.

Co-developed-by: Lina Iyer 
Signed-off-by: Lina Iyer 
Signed-off-by: Abel Vesa 
Signed-off-by: Bjorn Andersson 
Link: https://lore.kernel.org/r/20221116112246.2640648-2-abel.vesa@linaro.org