linux.git/drivers/soc/imx, branch v4.18

soc: imx: gpc: restrict register range for regmap access

2018-07-19T02:24:00+00:00

GPC registers are NOT continuous, some registers are
reserved and accessing them from userspace will trigger
external abort, add regmap register access table to
avoid below abort:

root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers
[  108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004
[  108.487985] pgd = 42b54bfd
[  108.490741] [b6db5004] *pgd=ba1b7831
[  108.494386] Internal error: : 1406 [#1] SMP ARM
[  108.498943] Modules linked in:
[  108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482
[  108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree)
[  108.516123] PC is at regmap_mmio_read32le+0x20/0x24
[  108.521031] LR is at regmap_mmio_read+0x40/0x60
[  108.525586] pc : []    lr : []    psr: 20060093
[  108.531875] sp : eccf1d98  ip : eccf1da8  fp : eccf1da4
[  108.537122] r10: ec2d3800  r9 : eccf1f60  r8 : ecfc0000
[  108.542370] r7 : eccf1e2c  r6 : eccf1e2c  r5 : 00000028  r4 : ec338e00
[  108.548920] r3 : 00000000  r2 : eccf1e2c  r1 : f0980028  r0 : 00000000
[  108.555474] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  108.562720] Control: 10c5387d  Table: acf4004a  DAC: 00000051
[  108.568491] Process cat (pid: 389, stack limit = 0xd4318a65)
[  108.574174] Stack: (0xeccf1d98 to 0xeccf2000)

Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Anson Huang 
Reviewed-by: Fabio Estevam 
Signed-off-by: Shawn Guo

soc: imx: gpcv2: correct PGC offset

2018-06-17T07:37:27+00:00

Correct MIPI/PCIe/USB_HSIC's PGC offset based on
design RTL, the values in the Reference Manual
(Rev. 1, 01/2018 and the older ones) are incorrect.

The correct offset values should be as below:

0x800 ~ 0x83F: PGC for core0 of A7 platform;
0x840 ~ 0x87F: PGC for core1 of A7 platform;
0x880 ~ 0x8BF: PGC for SCU of A7 platform;
0xA00 ~ 0xA3F: PGC for fastmix/megamix;
0xC00 ~ 0xC3F: PGC for MIPI PHY;
0xC40 ~ 0xC7F: PGC for PCIe_PHY;
0xC80 ~ 0xCBF: PGC for USB OTG1 PHY;
0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY;
0xD00 ~ 0xD3F: PGC for USB HSIC PHY;

Signed-off-by: Anson Huang 
Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver")
Acked-by: Andrey Smirnov 
Reviewed-by: Fabio Estevam 
Signed-off-by: Shawn Guo

soc: imx: gpc: Do not pass static memory as platform data

2018-04-23T09:03:15+00:00

Platform device core assumes the ownership of dev.platform_data as
well as that it is dynamically allocated and it will try to kfree it
as a part of platform_device_release(). Change the code to use
platform_device_add_data() instead of a pointer to a static memory to
avoid causing a BUG() when calling platform_device_put().

The problem can be reproduced by artificially enabling the error path
of platform_device_add() call (around line 452).

Cc: Stefan Agner 
Cc: Lucas Stach 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov 
Signed-off-by: Shawn Guo

soc: imx: gpcv2: Do not pass static memory as platform data

2018-04-23T09:03:02+00:00

Platform device core assumes the ownership of dev.platform_data as
well as that it is dynamically allocated and it will try to kfree it
as a part of platform_device_release(). Change the code to use
platform_device_add_data() n instead of a pointer to a static memory
to avoid causing a BUG() when calling platform_device_put().

The problem can be reproduced by artificially enabling the error path
of platform_device_add() call (around line 357).

Note that this change also allows us to constify imx7_pgc_domains,
since we no longer need to be able to modify it.

Cc: Stefan Agner 
Cc: Lucas Stach 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov 
Signed-off-by: Shawn Guo

Merge tag 'imx-drivers-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers

2018-03-15T15:23:33+00:00

Pull "i.MX drivers update for 4.17" from Shawn Guo:

 - Set GENPD_FLAG_ALWAYS_ON flag for ARM power domain to avoid incorrect
   power state in sysfs pm_genpd_summary output.

* tag 'imx-drivers-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: gpc: ARM power domain should be always-on

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2018-03-01T00:11:04+00:00

Pull ARM SoC fixes from Arnd Bergmann:
 "This is the first set of bugfixes for ARM SoCs, fixing a couple of
  stability problems, mostly on TI OMAP and Rockchips platforms:

   - OMAP2 hwmod clocks must be enabled in the correct order

   - OMAP3 Wakeup from resume through PRM IRQ was unreliable

   - one regression on OMAP5 caused by a kexec fix

   - Rockchip ethernet needs some settings for stable operation on
     Rock64

   - Rockchip based Chrombook Plus needs another clock setting for
     stable display suspend/resume

   - Rockchip based phyCORE-RK3288 was able to run at an invalid CPU
     clock frequency

   - Rockchip MMC link was sometimes unreliable

   - multiple fixes to avoid crashes in the Broadcom STB DPFE driver

  Other minor changes include:

   - Devicetree fixes for incorrect hardware description (rockchip,
     omap, Gemini, amlogic)

   - some MAINTAINER file updates to correct email and git addresses

   - some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic,
     cavium, qualcomm, hisilicon, zx)

   - fixes for LTO-compilation (orion, davinci, clps711x)

   - one fix for an incorrect Kconfig errata selection

   - a memory leak in the OMAP timer driver

   - a kernel data leak in OMAP1 debugfs files"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  MAINTAINERS: update entries for ARM/STM32
  ARM: dts: bcm283x: Move arm-pmu out of soc node
  ARM: dts: bcm283x: Fix unit address of local_intc
  ARM: dts: NSP: Fix amount of RAM on BCM958625HR
  ARM: dts: Set D-Link DNS-313 SATA to muxmode 0
  ARM: omap2: set CONFIG_LIRC=y in defconfig
  ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS
  memory: brcmstb: dpfe: support new way of passing data from the DCPU
  memory: brcmstb: dpfe: fix type declaration of variable "ret"
  memory: brcmstb: dpfe: properly mask vendor error bits
  ARM: BCM: dts: Remove leading 0x and 0s from bindings notation
  ARM: orion: fix orion_ge00_switch_board_info initialization
  ARM: davinci: mark spi_board_info arrays as const
  ARM: clps711x: mark clps711x_compat as const
  arm: zx: dts: Remove leading 0x and 0s from bindings notation
  arm64: dts: Remove leading 0x and 0s from bindings notation
  arm64: dts: cavium: fix PCI bus dtc warnings
  MAINTAINERS: ARM: at91: update my email address
  soc: imx: gpc: de-register power domains only if initialized
  ARM: dts: rockchip: Fix DWMMC clocks
  ...

treewide/trivial: Remove ';;$' typo noise

2018-02-22T09:59:33+00:00

On lkml suggestions were made to split up such trivial typo fixes into per subsystem
patches:

  --- a/arch/x86/boot/compressed/eboot.c
  +++ b/arch/x86/boot/compressed/eboot.c
  @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height)
          struct efi_uga_draw_protocol *uga = NULL, *first_uga;
          efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID;
          unsigned long nr_ugas;
  -       u32 *handles = (u32 *)uga_handle;;
  +       u32 *handles = (u32 *)uga_handle;
          efi_status_t status = EFI_INVALID_PARAMETER;
          int i;

This patch is the result of the following script:

  $ sed -i 's/;;$/;/g' $(git grep -E ';;$'  | grep "\.[ch]:"  | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq)

... followed by manual review to make sure it's all good.

Splitting this up is just crazy talk, let's get over with this and just do it.

Reported-by: Pavel Machek 
Cc: Linus Torvalds 
Cc: Peter Zijlstra 
Cc: Thomas Gleixner 
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar

soc: imx: gpc: de-register power domains only if initialized

2018-02-22T03:22:12+00:00

If power domain information are missing in the device tree, no
power domains get initialized. However, imx_gpc_remove tries to
remove power domains always in the old DT binding case. Only
remove power domains when imx_gpc_probe initialized them in
first place.

Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Stefan Agner 
Reviewed-by: Lucas Stach 
Reviewed-by: Fabio Estevam 
Signed-off-by: Shawn Guo

soc: imx: gpc: ARM power domain should be always-on

2018-02-12T05:07:48+00:00

ARM power domain does NOT support runtime off, always-on
flag should be set to avoid incorrect power state in
pm_genpd_summary:

Before:

root@imx6qpdlsolox:~# cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
domain                          status          slaves
    /device                                             runtime status
----------------------------------------------------------------------
ARM                             off-0

After:

root@imx6qpdlsolox:~# cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
domain                          status          slaves
    /device                                             runtime status
----------------------------------------------------------------------
ARM                             on

Signed-off-by: Anson Huang 
Reviewed-by: Lucas Stach 
Acked-by: Dong Aisheng 
Signed-off-by: Shawn Guo

soc: imx: gpc: Add i.MX6SX PCI power domain

2017-12-26T08:26:46+00:00

i.MX6SX has a PCI power domain in PGC. Add support for it.

Signed-off-by: Fabio Estevam 
Acked-by: Lucas Stach 
Signed-off-by: Shawn Guo