linux.git/drivers/soc/Kconfig, branch v4.12

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2017-05-09T17:01:15+00:00

Pull ARM SoC driver updates from Olof Johansson:
 "Driver updates for ARM SoCs:

  Reset subsystem, merged through arm-soc by tradition:
   - Make bool drivers explicitly non-modular
   - New support for i.MX7 and Arria10 reset controllers

  PATA driver for Palmchip BK371 (acked by Tejun)

  Power domain drivers for i.MX (GPC, GPCv2)
   - Moved out of mach-imx for GPC
   - Bunch of tweaks, fixes, etc

  PMC support for Tegra186

  SoC detection support for Renesas RZ/G1H and RZ/G1N

  Move Tegra flow controller driver from mach directory to drivers/soc
   - (Power management / CPU power driver)

  Misc smaller tweaks for other platforms"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
  soc: pm-domain: Fix the mangled urls
  soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
  soc: renesas: rcar-sysc: Add support for fixing up power area tables
  soc: renesas: Register SoC device early
  soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
  dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
  soc: imx: gpc: add defines for domain index
  soc: imx: Add GPCv2 power gating driver
  dt-bindings: Add GPCv2 power gating driver
  ARM/clk: move the ICST library to drivers/clk
  ARM: plat-versatile: remove stale clock header
  ARM: keystone: Drop PM domain support for k2g
  soc: ti: Add ti_sci_pm_domains driver
  dt-bindings: Add TI SCI PM Domains
  PM / Domains: Do not check if simple providers have phandle cells
  PM / Domains: Add generic data pointer to genpd data struct
  soc/tegra: Add initial flowctrl support for Tegra132/210
  soc/tegra: flowctrl: Add basic platform driver
  soc/tegra: Move Tegra flowctrl driver
  ARM: tegra: Remove unnecessary inclusion of flowctrl header
  ...

soc: imx: Add GPCv2 power gating driver

2017-04-07T11:37:07+00:00

Add code allowing for control of various power domains managed by GPCv2
IP block found in i.MX7 series of SoCs. Power domains covered by this
patch are:

    - PCIE PHY
    - MIPI PHY
    - USB HSIC PHY
    - USB OTG1/2 PHY

Support for any other power domain controlled by GPC is not present, and
can be added at some later point.

Testing of this code was done against a PCIe driver.

Cc: yurovsky@gmail.com
Cc: Lucas Stach 
Cc: Fabio Estevam 
Cc: Dong Aisheng 
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov 
Signed-off-by: Shawn Guo

ARM: at91: move SoC detection to its own driver

2017-03-31T18:36:10+00:00

To simplify machine init and as the soc_device struct is not used as the
parent for on-chip devices anymore, move SoC detection to its own driver.

Change in dmesg:
 - before:
DMA: preallocated 256 KiB pool for atomic coherent allocations
AT91: Detected SoC family: sama5d2
AT91: Detected SoC: sama5d27, revision 0
No ATAGs?
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns
at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xe085b000
SCSI subsystem initialized

 - after:
DMA: preallocated 256 KiB pool for atomic coherent allocations
No ATAGs?
clocksource: tcb_clksrc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 184217874325 ns
at_xdmac f0010000.dma-controller: 16 channels, mapped at 0xe0859000
AT91: Detected SoC family: sama5d2
AT91: Detected SoC: sama5d27, revision 0
SCSI subsystem initialized

Suggested-by: Arnd Bergmann 
Acked-by: Nicolas Ferre 
Signed-off-by: Alexandre Belloni

soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family

2017-01-11T08:21:10+00:00

The ARMv8 zx2967 family (296718, 296716 etc) uses different value
for controlling the power domain on/off registers, Choose the
value depending on the compatible.

Multiple domains are prepared for the family, this patch prepares
the common functions.

Signed-off-by: Baoyou Xie 
Signed-off-by: Shawn Guo

soc: fsl: add GUTS driver for QorIQ platforms

2016-11-29T08:17:20+00:00

The global utilities block controls power management, I/O device
enabling, power-onreset(POR) configuration monitoring, alternate
function selection for multiplexed signals,and clock control.

This patch adds a driver to manage and access global utilities block.
Initially only reading SVR and registering soc device are supported.
Other guts accesses, such as reading RCW, should eventually be moved
into this driver as well.

Signed-off-by: Yangbo Lu 
Acked-by: Arnd Bergmann 
Signed-off-by: Ulf Hansson

arch/powerpc: Add CONFIG_FSL_DPAA to corenetXX_smp_defconfig

2016-09-25T07:39:01+00:00

Enable the drivers on the powerpc arch.

Signed-off-by: Roy Pledge 
Signed-off-by: Claudiu Manoil 
Signed-off-by: Scott Wood

Merge tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers

2016-07-14T13:23:19+00:00

Merge "Ux500 cleanups from Arnd" from Linus Walleij:

This is a set of cleanups for the Ux500 that reduce the number
of machine-local files and boardfile-type data for regulators
and ASoC.

* tag 'ux500-cleanup-bundle' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: consolidate base platform files
  ARM: ux500: move soc_id driver to drivers/soc
  ARM: ux500: call ux500_setup_id later
  ARM: ux500: consolidate soc_device code in id.c
  ARM: ux500: remove cpu_is_u* helpers
  ARM: ux500: use CLK_OF_DECLARE()
  ARM: ux500: move l2x0 init to .init_irq
  mfd: db8500 stop passing around platform data
  ASoC: ab8500-codec: remove platform data based probe
  ARM: ux500: move ab8500_regulator_plat_data into driver
  ARM: ux500: remove unused regulator data

ARM: ux500: move soc_id driver to drivers/soc

2016-07-12T09:24:09+00:00

As the ux500 id code is basically a standalone driver, we can move it
out of the arch code into drivers/soc/ux500.

This is a user-visible change, as it moves all the devices in sysfs
from /sys/devices/soc0/ to /sys/devices/ and leaves the soc0 node as a
separate device.

Originally the idea was to put all on-chip devices under the soc node,
and ux500 was the first platform to have this device, but later platforms
almost all didn't follow that pattern, so this makes the platform do
the same thing as everyone else.

Since the platform is really obsolete now, I am optimistic that nothing
will break after moving the devices around.

As the SoC driver no longer has access to the private header files,
I'm changing the code to instead look up the address of the backupram
from devicetree, which is a good idea anyway.

Finally, having a separate Kconfig symbol means the driver is now
optional and could even be a loadable module rather than always being
built-in if we allowed that for soc_device.

Signed-off-by: Arnd Bergmann 
[Fixup mising Makefile, fixup BB_UID_BASE to fc0]
Signed-off-by: Linus Walleij

soc: Move brcmstb to bcm/brcmstb

2016-05-31T18:06:34+00:00

Unify the different Broadcom SoCs directory and have everybody live
under drivers/soc/bcm/*.

Acked-by: Scott Branden 
Signed-off-by: Florian Fainelli

drivers: soc: Add support for Exynos PMU driver

2016-02-25T01:18:07+00:00

This patch moves Exynos PMU driver implementation from "arm/mach-exynos"
to "drivers/soc/samsung". This driver is mainly used for setting misc
bits of register from PMU IP of Exynos SoC which will be required to
configure before Suspend/Resume. Currently all these settings are done
in "arch/arm/mach-exynos/pmu.c" but moving ahead for ARM64 based SoC
support, there is a need of this PMU driver in driver/* folder.

This driver uses existing DT binding information and there should
be no functionality change in the supported platforms.

Signed-off-by: Amit Daniel Kachhap 
[tested on Peach-Pi (Exynos5880)]
Signed-off-by: Pankaj Dubey 
Reviewed-by: Krzysztof Kozlowski 
[for testing on Trats2 (Exynos4412) and Odroid XU3 (Exynos5422)]
Tested-by: Krzysztof Kozlowski 
[k.kozlowski: Rebased, add necessary infrastructure for building and
selecting drivers/soc because original patchset was on top of movement
SROMc to drivers/soc]
Signed-off-by: Krzysztof Kozlowski