linux.git/drivers/sh, branch v3.1-rc2 Linux kernel source tree Merge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x 2011-08-01T16:10:16+00:00 Linus Torvalds torvalds@linux-foundation.org 2011-08-01T16:10:16+00:00 e10b87d2b5b4574cdf3a5a19b22ca88b91ba7151 * 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits) SH: static should be at beginning of declaration sh: move CLKDEV_xxx_ID macro to sh_clk.h sh: clock-shx3: add CLKDEV_ICK_ID for cleanup sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup sh: clock-sh7366: modify I2C clock settings sh: clock-sh7343: modify I2C clock settings sh: clock-sh7723: modify I2C clock settings sh: clock-sh7722: modify I2C clock settings sh: clock-sh7724: modify I2C clock settings serial: sh-sci: Fix up pretty name printing for port IRQs. serial: sh-sci: Kill off per-port enable/disable callbacks. serial: sh-sci: Add missing module description/author bits. serial: sh-sci: Regtype probing doesn't need to be fatal. sh: Tidy up pre-clkdev clk_get() error handling. ... 
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits)
  SH: static should be at beginning of declaration
  sh: move CLKDEV_xxx_ID macro to sh_clk.h
  sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: modify I2C clock settings
  sh: clock-sh7343: modify I2C clock settings
  sh: clock-sh7723: modify I2C clock settings
  sh: clock-sh7722: modify I2C clock settings
  sh: clock-sh7724: modify I2C clock settings
  serial: sh-sci: Fix up pretty name printing for port IRQs.
  serial: sh-sci: Kill off per-port enable/disable callbacks.
  serial: sh-sci: Add missing module description/author bits.
  serial: sh-sci: Regtype probing doesn't need to be fatal.
  sh: Tidy up pre-clkdev clk_get() error handling.
  ...
switch assorted clock drivers to debugfs_remove_recursive() 2011-07-21T00:47:51+00:00 Al Viro viro@zeniv.linux.org.uk 2011-07-16T16:37:57+00:00 12520c438f48113593130d210eba821a532c893b Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> 
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
sh: clkfwk: Convert to IS_ERR_OR_NULL. 2011-06-24T08:35:40+00:00 Paul Mundt lethal@linux-sh.org 2011-06-24T08:35:40+00:00 225ca45c3c64964163ea1fa85e2081af85956eed Trivial cleanup. Signed-off-by: Paul Mundt <lethal@linux-sh.org> 
Trivial cleanup.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
drivers: sh: late disabling of clocks V2 2011-06-24T07:27:07+00:00 Magnus Damm damm@opensource.se 2011-06-21T07:55:12+00:00 794d78fea51504bad3880d14f354a9847f318f25 This V2 patch changes the clock disabling behavior during boot. Two different changes are made: 1) Delay disabling of clocks until late in the boot process. This fixes an existing issue where in-use clocks without software reference are disabled by mistake during boot. One example of this is the handling of the Mackerel serial console output that shares clock with the I2C controller. 2) Write out the "disabled" state to the hardware for clocks that not have been used by the kernel. In other words, make sure so far unused clocks actually get turned off. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 
This V2 patch changes the clock disabling behavior during boot.
Two different changes are made:

1) Delay disabling of clocks until late in the boot process.
   This fixes an existing issue where in-use clocks without
   software reference are disabled by mistake during boot.
   One example of this is the handling of the Mackerel serial
   console output that shares clock with the I2C controller.

2) Write out the "disabled" state to the hardware for clocks
   that not have been used by the kernel. In other words,
   make sure so far unused clocks actually get turned off.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
drivers: sh: resume enabled clocks fix 2011-06-14T06:15:25+00:00 Magnus Damm damm@opensource.se 2011-06-13T04:42:15+00:00 583af252ab07cd1e8721878463da5b7016c18fdc Extend the SH / SH-Mobile ARM clock framework to only resume clocks that have been enabled. Without this fix divide-by-zero is triggering on sh7372 FSIDIV during system wide resume of Suspend-to-RAM. Signed-off-by: Magnus Damm <damm@opensource.se> Reviewed-by: Simon Horman <horms@verge.net.au> Signed-off-by: Paul Mundt <lethal@linux-sh.org> 
Extend the SH / SH-Mobile ARM clock framework to only
resume clocks that have been enabled.

Without this fix divide-by-zero is triggering on sh7372
FSIDIV during system wide resume of Suspend-to-RAM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Merge branch 'sh/genirq-threading' into sh-latest 2011-05-23T02:36:14+00:00 Paul Mundt lethal@linux-sh.org 2011-05-23T02:36:14+00:00 972b1943becc2dd4335c1b9d8ecd07c5ad44dd88 






sh: intc: Set virtual IRQs as nothread.
2011-04-27T05:35:44+00:00

Paul Mundt
lethal@linux-sh.org

2011-04-18T02:45:08+00:00

442f56d917959cbc3fd7a56c5eb43b0d728cad26

Signed-off-by: Paul Mundt <lethal@linux-sh.org>





Signed-off-by: Paul Mundt <lethal@linux-sh.org>







sh: clkfwk: fixup clk_rate_table_build parameter in div6 clock
2011-04-18T09:33:31+00:00

Kuninori Morimoto
kuninori.morimoto.gx@renesas.com

2011-04-14T08:13:53+00:00

52c10ad22b7e317960b4d411c9a9ddeaf3d5ae39

div6 clock should not use arch_flags for clk_rate_table_build,
because SH_CLK_DIV6_EXT doesn't care .arch_flags.
clk->freq_table[] will be all CPUFREQ_ENTRY_INVALID without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>





div6 clock should not use arch_flags for clk_rate_table_build,
because SH_CLK_DIV6_EXT doesn't care .arch_flags.
clk->freq_table[] will be all CPUFREQ_ENTRY_INVALID without this patch.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>







sh: Fix irq cleanup fallout
2011-03-29T22:15:49+00:00

Thomas Gleixner
tglx@linutronix.de

2011-03-29T22:15:49+00:00

286b9bfe8ef6d97213c86bbaf30c250fd1f67568

I missed that coccinelle does not fix up header files by default.

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: <lethal@linux-sh.org>





I missed that coccinelle does not fix up header files by default.

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: <lethal@linux-sh.org>







sh: Convert to new function names
2011-03-29T12:48:13+00:00

Thomas Gleixner
tglx@linutronix.de

2011-03-24T15:31:17+00:00

fcb8918fd242f39496090dbbd6789ab24098295b

Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>





Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>