linux.git/drivers/serial/sunsu.c, branch v2.6.24

[SERIAL] sparc: Infrastructure to fix section mismatch bugs.

2007-12-12T15:36:34+00:00

This patch against 2.6.23 sparc-2.6.git contains a number of minor
cleanups of the sparc serial drivers.  Initially I fixed this build
warning:

WARNING: vmlinux.o(.text+0x107a2c): Section mismatch: reference to .init.text:add_preferred_console (between 'sunserial_console_match' and 'sunserial_console_termios')

which is done by declaring sunserial_console_match() as __init.  This
resulted in build warnings on sunserial_current_minor.  To resolve
these the variable was changed so it is no longer global, and to hide
operations on it inside 2 new functions. These functions handle the
UART minor handling code that is common to all sparc serial drivers.

These changes allowed to clean up the uart counters in all the sparc
serial drivers, and the administration of minor device numbers.

Lastly, sunserial_console_termios() does not need to be exported since
it is only called from non-modular code.

Sadly, the following build warning still exists:

WARNING: vmlinux.o(__ksymtab+0x2910): Section mismatch: reference to .init.text:sunserial_console_match (between '__ksymtab_sunserial_console_match' and '__ksymtab_sunserial_unregister_minors')

This could be resolved by not exporting sunserial_console_match(), but
this is not possible at the moment because it is being called from
modular code. On the other hand, this is a bogus warning since it
comes from a ksymtab section.

Signed-off-by: Martin Habets 
Signed-off-by: David S. Miller

[SERIAL]: Fix 32-bit warnings in sunzilog.c and sunsu.c

2007-08-27T01:49:11+00:00

resource_size_t can be either a u64 or a u32, and we can't
really know for sure, so when printing such a value out
always use long-long printf formatting and cast the argument
to that type.

Signed-off-by: David S. Miller

[SPARC]: Fix serial console device detection.

2007-07-20T23:59:26+00:00

The current scheme works on static interpretation of text names, which
is wrong.

The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.

Paths also contain an optional set of 'options', which starts with a
colon at the end of the path.  The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports.  'a' is assumed if the option
specification is missing.

This was caught by the UltraSPARC-T1 simulator.  The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'.  Instead we saw it
as the first serial console device, instead of the hypervisor console.

The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.

Thanks to Greg Onufer for the bug report.

Signed-off-by: David S. Miller

[SERIAL]: Fix console write locking in sparc drivers.

2007-07-16T11:05:28+00:00

Mirror the logic in 8250 for proper console write locking
when SYSRQ is triggered or an OOPS is in progress.

Signed-off-by: David S. Miller

[SERIAL] sunsu: Fix section mismatch warnings.

2007-05-07T07:14:13+00:00

Mark sunsu_console_setup() as __init and rename 'sunsu_cons'
to 'sunsu_console' so that it matches modpost.c's whitelist.

Signed-off-by: David S. Miller

[SPARC/64] constify of_get_property return: drivers

2007-04-26T08:54:27+00:00

The only unfortunate bit here is that the name field of struct map_info
is not const, so for now we put a cast on the assignment of it.

Signed-off-by: Stephen Rothwell 
Signed-off-by: David S. Miller

[PATCH] remove many unneeded #includes of sched.h

2007-02-14T16:09:54+00:00

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau 
Acked-by: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[SPARC64]: Fix of_iounmap() region release.

2006-12-31T22:06:05+00:00

We need to pass in the resource otherwise we cannot
release the region properly.  We must know whether it is
an I/O or MEM resource.

Spotted by Eric Brower.

Signed-off-by: David S. Miller

[PATCH] tty: switch to ktermios

2006-12-08T16:28:57+00:00

This is the grungy swap all the occurrences in the right places patch that
goes with the updates.  At this point we have the same functionality as
before (except that sgttyb() returns speeds not zero) and are ready to
begin turning new stuff on providing nobody reports lots of bugs

If you are a tty driver author converting an out of tree driver the only
impact should be termios->ktermios name changes for the speed/property
setting functions from your upper layers.

If you are implementing your own TCGETS function before then your driver
was broken already and its about to get a whole lot more painful for you so
please fix it 8)

Also fill in c_ispeed/ospeed on init for most devices, although the current
code will do this for you anyway but I'd like eventually to lose that extra
paranoia

[akpm@osdl.org: bluetooth fix]
[mp3@de.ibm.com: sclp fix]
[mp3@de.ibm.com: warning fix for tty3270]
[hugh@veritas.com: fix tty_ioctl powerpc build]
[jdike@addtoit.com: uml: fix ->set_termios declaration]
Signed-off-by: Alan Cox 
Signed-off-by: Martin Peschke 
Acked-by: Peter Oberparleiter 
Cc: Cornelia Huck 
Signed-off-by: Hugh Dickins 
Signed-off-by: Jeff Dike 
Cc: Paolo 'Blaisorblade' Giarrusso 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

IRQ: Maintain regs pointer globally rather than passing to IRQ handlers

2006-10-05T14:10:12+00:00

Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells 
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)