linux.git/drivers/serial/serial_cs.c, branch v2.6.24

netdrvr/pcmcia: use IRQ_TYPE_DYNAMIC_SHARING flag for irq.Attributes.

2007-10-29T10:07:05+00:00

The drivers below support IRQ-sharing.

3c574_cs, 3c589_cs, pcnet_cs,
axnet_cs, smc91c92_cs, fmvj18x_cs.
xirc2ps_cs, serial_cs.

Signed-off-by: Komuro 
Signed-off-by: Jeff Garzik

Add support for PCMCIA card Sierra WIreless AC850

2007-10-16T16:42:50+00:00

Add support for Sierra Wireless AC850 which has the same Ids as the
AC710/750 but has a different firmware.

Cc: Dominik Brodowski 
Cc: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

Add manufacturer and card id of teltonica pcmcia modems

2007-10-07T23:28:43+00:00

Add the manufacturer and card id of teltonica pcmcia modems to serial_cs.c

Signed-off-by: Attila Kinali 
Acked-by: Alan Cox 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

PCMCIA-NETDEV : add new ID of lan&modem multifunction card

2007-07-09T02:16:39+00:00

fmvj18x_cs:
      NEC PK-UG-J001
      Panasonic CF-VML201
      Panasonic TO-PDL9610

pcnet_cs:
       MICRO-RESEARCH  MC336LAN

Signed-off-by: Komuro 
Signed-off-by: Jeff Garzik

serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.

2007-02-16T23:19:16+00:00

Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter.

Signed-off-by: Sergei Organov 
Acked-by: Alan Cox 
Signed-off-by: Greg Kroah-Hartman

[PATCH] remove many unneeded #includes of sched.h

2007-02-14T16:09:54+00:00

After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau 
Acked-by: Russell King 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] serial: replace kmalloc+memset with kzalloc

2007-02-14T16:09:52+00:00

Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation

2006-12-05T01:12:02+00:00

struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost
all PCMICA driver right at the beginning, using the same calls but slightly
different implementations. Unfiy this in the PCMCIA core.

Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused
label") from and Signed-off-by Adrian Bunk 

Signed-off-by: Dominik Brodowski

[PATCH] pcmcia: remove manf_id and card_id indirection

2006-12-05T01:09:20+00:00

As we read out the manufactor and card_id from the PCMCIA device in the
PCMCIA core, and device drivers can access those reliably in struct
pcmcia_device's fields manf_id and card_id, remove additional (and partly
broken) manf_id and card_id detection logic from PCMCIA device drivers.

Signed-off-by: Dominik Brodowski

[PATCH] pcmcia: IDs for Elan serial PCMCIA devcies

2006-12-05T01:09:19+00:00

Add IDs for Elan serial PCMCIA devices. In addition, move the
pdaudio_cf driver from matching based on manf_id and card_id to
the more specific prod_id1 and prod_id2 to avoid false
positives.

Signed-off-by: Tony Olech 
Signed-off-by: Dominik Brodowski