linux.git/drivers/serial/serial_cs.c, branch v2.6.19 Linux kernel source tree [SERIAL] Fix resume handling bug 2006-10-01T16:14:07+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-10-01T16:14:07+00:00 fe59d5372ae719ca4550958f1e5bb4dd6eeac9cd Unfortunately, pcmcia_dev_present() returns false when a device is suspended, so checking this on resume does not work too well. Omit this test. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Unfortunately, pcmcia_dev_present() returns false when a device is
suspended, so checking this on resume does not work too well.  Omit
this test.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[SERIAL] serial_cs: Add quirk for brainboxes 2-port RS232 card 2006-10-01T16:06:45+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-09-16T22:07:46+00:00 f3d106881b06a423455f95916e666acebe6503f2 Mauro Ziliani reports that this card has a higher clock rate. Rather than tweak the 8250 driver to handle this, add a quirk to pass the correct clock rate to the driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Mauro Ziliani reports that this card has a higher clock rate.
Rather than tweak the 8250 driver to handle this, add a quirk to
pass the correct clock rate to the driver.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[SERIAL] serial_cs: handle Nokia multi->single port bodge via config quirk 2006-10-01T16:06:41+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-09-16T22:04:37+00:00 20f130495c07cd01fb423c3dec7f045038118dec According to the existing code, Nokia only make single-port cards, but are detected as multi-port cards. Handle this in roughly the same way via the config quirk - forcing it to be a real single port card (info->multi=0) changes the way we allocate the IO memory, which might stop the card working. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
According to the existing code, Nokia only make single-port cards,
but are detected as multi-port cards.  Handle this in roughly the
same way via the config quirk - forcing it to be a real single port
card (info->multi=0) changes the way we allocate the IO memory,
which might stop the card working.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[SERIAL] serial_cs: add configuration quirk 2006-10-01T16:06:37+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-09-16T22:00:54+00:00 efd92dfaad962c4fbaf4251b28578c97bd3aa85f Add a quirk primerily to handle tweaks to the link->conf structure, eg as required for Socket cards. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Add a quirk primerily to handle tweaks to the link->conf structure,
eg as required for Socket cards.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[SERIAL] serial_cs: Convert Oxford 950 / Possio GCC wakeup quirk 2006-10-01T16:06:34+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-09-16T21:45:41+00:00 7ef057fa707897c19725d7e07123e57f6aea79db Move the Oxford Semi OX950 / Possio GCC wakeup handling to a quirk wakeup handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Move the Oxford Semi OX950 / Possio GCC wakeup handling to a quirk
wakeup handler.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[SERIAL] serial_cs: convert IBM post-init handling to a quirk 2006-10-01T16:06:30+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-09-16T20:34:11+00:00 eee3a883cebefca6c450c3c1c18a996e23001c2c Move IBM quirk handling into its own quirk entry. Note that doing quirk handling after we've registered the ports is racy, but since I don't know if moving this will have an undesired effect, it's probably better to leave where it is. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Move IBM quirk handling into its own quirk entry.  Note that doing
quirk handling after we've registered the ports is racy, but since
I don't know if moving this will have an undesired effect, it's
probably better to leave where it is.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[SERIAL] serial_cs: allow wildcarded quirks 2006-10-01T16:06:27+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-09-16T20:26:16+00:00 a8244b564ccc46dabf2367008aecf2b380a9be8d Some quirks we will introduce next apply to (eg) all cards of one manufacturer. Therefore, we need a way to list these in the quirk table - use ~0 - this is not a possible device ID value. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
Some quirks we will introduce next apply to (eg) all cards of one
manufacturer.  Therefore, we need a way to list these in the quirk
table - use ~0 - this is not a possible device ID value.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[SERIAL] serial_cs: convert multi-port table to quirk table 2006-10-01T16:06:23+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-09-16T20:09:41+00:00 1fbbac4bcb03033d325c71fc7273aa0b9c1d9a03 - rename multi_id table to serial_quirk / quirks[] - use named initialisers - store a pointer to the quirk table in the serial_info structure so we can use the quirk table entry later. - apply multi-port quirk after the multi-port guessing code, but only if it's != -1. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
- rename multi_id table to serial_quirk / quirks[]
- use named initialisers
- store a pointer to the quirk table in the serial_info structure
  so we can use the quirk table entry later.
- apply multi-port quirk after the multi-port guessing code,
  but only if it's != -1.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[SERIAL] serial_cs: Use clean up multiport card detection 2006-10-01T16:06:20+00:00 Russell King rmk@dyn-67.arm.linux.org.uk 2006-09-16T19:53:05+00:00 43549ad7a74e33947f3ba1756a7713086d32e97c - Use ARRAY_SIZE() instead of home grown based version. - use parse->manfid.card rather than le16_to_cpu(buf[1]) - manfid.card is already converted to this format. - use info->prodid in subsequent tests rather than parse->manfid.card. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 
- Use ARRAY_SIZE() instead of home grown based version.
- use parse->manfid.card rather than le16_to_cpu(buf[1]) -
  manfid.card is already converted to this format.
- use info->prodid in subsequent tests rather than
  parse->manfid.card.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[PATCH] pcmcia: another ID for serial_cs.c 2006-06-30T20:09:10+00:00 Dominik Brodowski linux@dominikbrodowski.net 2006-04-26T17:57:32+00:00 fec21889cd6ef5e604b410c08b50a8c1522d74d4 Add an ID for "GlobeTrotter" cards which need a CIS override Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> 
Add an ID for "GlobeTrotter" cards which need a CIS override

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>