linux.git/drivers/scsi, branch v4.20-rc2

Merge tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

2018-11-03T17:47:33+00:00

Pull Kbuild updates from Masahiro Yamada:

 - clean-up leftovers in Kconfig files

 - remove stale oldnoconfig and silentoldconfig targets

 - remove unneeded cc-fullversion and cc-name variables

 - improve merge_config script to allow overriding option prefix

* tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove cc-name variable
  kbuild: replace cc-name test with CONFIG_CC_IS_CLANG
  merge_config.sh: Allow to define config prefix
  kbuild: remove unused cc-fullversion variable
  kconfig: remove silentoldconfig target
  kconfig: remove oldnoconfig target
  powerpc: PCI_MSI needs PCI
  powerpc: remove CONFIG_MCA leftovers
  powerpc: remove CONFIG_PCI_QSPAN
  scsi: aha152x: rename the PCMCIA define

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2018-11-03T17:34:03+00:00

Pull more SCSI updates from James Bottomley:
 "This is a set of minor small (and safe changes) that didn't make the
  initial pull request plus some bug fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: mvsas: Remove set but not used variable 'id'
  scsi: qla2xxx: Remove two arguments from qlafx00_error_entry()
  scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res'
  scsi: qla2xxx: Remove a set-but-not-used variable
  scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze
  scsi: qla2xxx: Declare local functions 'static'
  scsi: qla2xxx: Improve several kernel-doc headers
  scsi: qla2xxx: Modify fall-through annotations
  scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb
  scsi: mvsas: Use dma_pool_zalloc
  scsi: target: Don't request modules that aren't even built
  scsi: target: Set response length for REPORT TARGET PORT GROUPS

powerpc: remove CONFIG_MCA leftovers

2018-11-01T15:15:24+00:00

Signed-off-by: Christoph Hellwig 
Acked-by: Thomas Gleixner 
Signed-off-by: Masahiro Yamada

scsi: aha152x: rename the PCMCIA define

2018-11-01T15:15:23+00:00

We plan to enable building the PCMCIA core and drivers, and the
non-prefixed PCMCIA name clashes with some arch headers.

Signed-off-by: Christoph Hellwig 
Acked-by: Thomas Gleixner 
Signed-off-by: Masahiro Yamada

Merge tag 'for-linus-20181026' of git://git.kernel.dk/linux-block

2018-10-26T19:43:13+00:00

Pull more block layer updates from Jens Axboe:

 - Set of patches improving support for zoned devices. This was ready
   before the merge window, but I was late in picking it up and hence it
   missed the original pull request (Damien, Christoph)

 - libata no link power management quirk addition for a Samsung drive
   (Diego Viola)

 - Fix for a performance regression in BFQ that went into this merge
   window (Federico Motta)

 - Fix for a missing dma mask setting return value check (Gustavo)

 - Typo in the gdrom queue failure case (me)

 - NULL pointer deref fix for xen-blkfront (Vasilis Liaskovitis)

 - Fixing the get_rq trace point placement in blk-mq (Xiaoguang Wang)

 - Removal of a set-but-not-read variable in cdrom (zhong jiang)

* tag 'for-linus-20181026' of git://git.kernel.dk/linux-block:
  libata: Apply NOLPM quirk for SAMSUNG MZ7TD256HAFV-000L9
  block, bfq: fix asymmetric scenarios detection
  gdrom: fix mistake in assignment of error
  blk-mq: place trace_block_getrq() in correct place
  block: Introduce blk_revalidate_disk_zones()
  block: add a report_zones method
  block: Expose queue nr_zones in sysfs
  block: Improve zone reset execution
  block: Introduce BLKGETNRZONES ioctl
  block: Introduce BLKGETZONESZ ioctl
  block: Limit allocation of zone descriptors for report zones
  block: Introduce blkdev_nr_zones() helper
  scsi: sd_zbc: Fix sd_zbc_check_zones() error checks
  scsi: sd_zbc: Reduce boot device scan and revalidate time
  scsi: sd_zbc: Rearrange code
  cdrom: remove set but not used variable 'tocuse'
  skd: fix unchecked return values
  xen/blkfront: avoid NULL blkfront_info dereference on device removal

Merge tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2018-10-26T15:14:13+00:00

Pull USB/PHY updates from Greg KH:
 "Here is the big USB/PHY driver patches for 4.20-rc1

  Lots of USB changes in here, primarily in these areas:

   - typec updates and new drivers

   - new PHY drivers

   - dwc2 driver updates and additions (this old core keeps getting
     added to new devices.)

   - usbtmc major update based on the industry group coming together and
     working to add new features and performance to the driver.

   - USB gadget additions for new features

   - USB gadget configfs updates

   - chipidea driver updates

   - other USB gadget updates

   - USB serial driver updates

   - renesas driver updates

   - xhci driver updates

   - other tiny USB driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits)
  usb: phy: ab8500: silence some uninitialized variable warnings
  usb: xhci: tegra: Add genpd support
  usb: xhci: tegra: Power-off power-domains on removal
  usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten
  usbip: tools: fix atoi() on non-null terminated string
  USB: misc: appledisplay: fix backlight update_status return code
  phy: phy-pxa-usb: add a new driver
  usb: host: add DT bindings for faraday fotg2
  usb: host: ohci-at91: fix request of irq for optional gpio
  usb/early: remove set but not used variable 'remain_length'
  usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc
  usb: typec: tcpm: Report back negotiated PPS voltage and current
  USB: core: remove set but not used variable 'udev'
  usb: core: fix memory leak on port_dev_path allocation
  USB: net2280: Remove ->disconnect() callback from net2280_pullup()
  usb: dwc2: disable power_down on rockchip devices
  usb: gadget: udc: renesas_usb3: add support for r8a77990
  dt-bindings: usb: renesas_usb3: add bindings for r8a77990
  usb: gadget: udc: renesas_usb3: Add r8a774a1 support
  USB: serial: cypress_m8: remove set but not used variable 'iflag'
  ...

block: Introduce blk_revalidate_disk_zones()

2018-10-25T17:17:40+00:00

Drivers exposing zoned block devices have to initialize and maintain
correctness (i.e. revalidate) of the device zone bitmaps attached to
the device request queue (seq_zones_bitmap and seq_zones_wlock).

To simplify coding this, introduce a generic helper function
blk_revalidate_disk_zones() suitable for most (and likely all) cases.
This new function always update the seq_zones_bitmap and seq_zones_wlock
bitmaps as well as the queue nr_zones field when called for a disk
using a request based queue. For a disk using a BIO based queue, only
the number of zones is updated since these queues do not have
schedulers and so do not need the zone bitmaps.

With this change, the zone bitmap initialization code in sd_zbc.c can be
replaced with a call to this function in sd_zbc_read_zones(), which is
called from the disk revalidate block operation method.

A call to blk_revalidate_disk_zones() is also added to the null_blk
driver for devices created with the zoned mode enabled.

Finally, to ensure that zoned devices created with dm-linear or
dm-flakey expose the correct number of zones through sysfs, a call to
blk_revalidate_disk_zones() is added to dm_table_set_restrictions().

The zone bitmaps allocated and initialized with
blk_revalidate_disk_zones() are freed automatically from
__blk_release_queue() using the block internal function
blk_queue_free_zone_bitmaps().

Reviewed-by: Hannes Reinecke 
Reviewed-by: Christoph Hellwig 
Reviewed-by: Martin K. Petersen 
Reviewed-by: Mike Snitzer 
Signed-off-by: Damien Le Moal 
Signed-off-by: Jens Axboe

block: add a report_zones method

2018-10-25T17:17:40+00:00

Dispatching a report zones command through the request queue is a major
pain due to the command reply payload rewriting necessary. Given that
blkdev_report_zones() is executing everything synchronously, implement
report zones as a block device file operation instead, allowing major
simplification of the code in many places.

sd, null-blk, dm-linear and dm-flakey being the only block device
drivers supporting exposing zoned block devices, these drivers are
modified to provide the device side implementation of the
report_zones() block device file operation.

For device mappers, a new report_zones() target type operation is
defined so that the upper block layer calls blkdev_report_zones() can
be propagated down to the underlying devices of the dm targets.
Implementation for this new operation is added to the dm-linear and
dm-flakey targets.

Reviewed-by: Hannes Reinecke 
Signed-off-by: Christoph Hellwig 
[Damien]
* Changed method block_device argument to gendisk
* Various bug fixes and improvements
* Added support for null_blk, dm-linear and dm-flakey.
Reviewed-by: Martin K. Petersen 
Reviewed-by: Mike Snitzer 
Signed-off-by: Damien Le Moal 
Signed-off-by: Jens Axboe

scsi: sd_zbc: Fix sd_zbc_check_zones() error checks

2018-10-25T17:17:40+00:00

The unsigned 32 bits overflow check for the zone size value is already
done within sd_zbc_check_zones() with the test:

} else if (logical_to_sectors(sdkp->device, zone_blocks) > UINT_MAX) {

so there is no need to check again for an out of range value in
sd_zbc_read_zones(). Simplify the code and fix sd_zbc_check_zones()
error return to -EFBIG instead of -ENODEV if the zone size is too large.
Change the return type of sd_zbc_check_zones() to an int for the error
code and return the zone size (zone_blocks) through a u32 pointer to
avoid overflowing the signed 32 return value.

Reviewed-by: Hannes Reinecke 
Acked-by: Martin K. Petersen 
Reviewed-by: Christoph Hellwig 
Signed-off-by: Damien Le Moal 
Signed-off-by: Jens Axboe

scsi: sd_zbc: Reduce boot device scan and revalidate time

2018-10-25T17:17:39+00:00

Handling checks of ZBC device capacity using the max_lba field of the
REPORT ZONES command reply for disks with rc_basis == 0 can be done
using the same report zones command reply used to check the "same"
field.

Avoid executing a report zones command solely to check the disk capacity
by merging sd_zbc_check_capacity() into sd_zbc_check_zone_size() and
renaming that function to sd_zbc_check_zones(). This removes a costly
execution of a full report zones command and so reduces device scan
duration at boot time as well as the duration of disk revalidate calls.

Furthermore, setting the partial report bit in the REPORT ZONES command
cdb can significantly reduce this command execution time as the device
does not have to count and report the total number of zones that could
be reported assuming a large enough reply buffer. A non-partial zone
report is necessary only for the first execution of report zones used to
check the same field value (to ensure that this value applies to all
zones of the disk). All other calls to sd_zbc_report_zones() can use a
partial report to reduce execution time.

Using a 14 TB ZBC disk, these simple changes reduce device scan time at
boot from about 3.5s down to about 900ms. Disk revalidate times are also
reduced from about 450ms down to 230ms.

Reviewed-by: Christoph Hellwig 
Reviewed-by: Hannes Reinecke 
Acked-by: Martin K. Petersen 
Signed-off-by: Damien Le Moal 
Signed-off-by: Jens Axboe